After experiencing the joy of purchasing an apartment, many new residents have to solve one more question: where to start renovating a bathroom in a new building
so that it is effective, but does not drag on for months? If you have at least theoretical knowledge, then the process itself is not as scary as it seems at first.
Bathroom renovation in a new building
Where and how to start renovating a bathroom in a new building?
To decide why
It’s better
to start renovating a bathroom in a new building
; you should evaluate the condition of the room. Most likely, the walls, floors and ceilings will be missing.
Next, you should evaluate whether the work will take place immediately or whether the owners will wait until the building settles. If work begins before moving in, it is worth remembering that during the first 1-2 years, cracks and other defects will appear on the wall cladding and other surfaces. Therefore, it offers 2 options for management: before and after shrinkage of the building.
What to do when you decide to renovate a bathroom before the building shrinks in a new building
Deciding to renovate a bathroom in a new building
for the sake of an aesthetic appearance, choosing an inexpensive facing option is
where
to
start
. Why inexpensive? Due to the shrinkage of the building over the next few years.
In this case, remember several important factors:
- Tiling is done quickly. If you choose an inexpensive but visually attractive option, after 2-3 years you will dismantle the tiles and throw it in the trash without pity.
- Economical ceiling covering - plasterboard. It is lightweight, not subject to deformation, and does not burden the structural solution. At the same time, the ceiling itself will have the ability to “adapt” to changes in the design of the new building.
- Installation of pipes in such a bathroom should begin with the selection of decent plastic options , where price and quality are chosen rationally. At the same time, the plastic is resistant to temperature changes and changes in water pressure. Plus, it is an anti-corrosion material.
Where should I start working on a bathroom in a new building that has not yet settled?
Consider:
- are partitions needed and where will they be located;
- what and how much lighting will be optimal;
- ventilation system;
- piping and electrical layout;
- where will the washing machine be located?
And only then:
- to groove walls and chisel grooves;
- add a plumbing system with hot and cold water pipes;
- control the sewerage connection.
Where to start renovating a bathroom in a new building that has already shrunk?
How much does a bathroom renovation cost?
If the house has already shrunk, you can renovate the bathroom so that freshness and cleanliness reign here. But first you need to understand where to start.
Therefore, proceed sequentially:
- Think over the design of the room. This is not only the interior of the bathroom, but also its color. The location of the plumbing is especially important - electrical forks are laid under it and sockets are installed.
- Make a repair plan. But first, think about what facing materials are applicable in your case (tiles, mosaic coating, porcelain stoneware, PVC panels).
Life style
If your eyes wander when choosing interior solutions, we recommend following the style instructions. Each interior style requires a certain color scheme, materials and decor, which significantly narrows the range of choices. And any style is tailored to a certain human psychotype, so choose the one to which your heart lies.
What to do if you like everything at once? Combine! Clean interior styles are going out of style, giving way to eclectic, custom spaces. Properly mixing elements of different styles is not the easiest task, but it is a great way to express yourself through the objective world. Don’t be afraid to experiment, the phrase “I’m an artist - that’s how I see it!” no one has canceled yet.
Interiors in the style of the 70s: what we got from them
Over the past few years, designers have not just looked back to the 70s, but have opened the doors wide to them, through which shaggy carpets, squat sofas, lacquered wood and other trends from the past are returning to our interiors.
Sequence of actions in the bathroom of a new building
If you find it difficult to answer where to start renovating a bathroom in a new building
, focus on a simple list of sequential steps:
1. Preparing the premises for changes in it. Dismantle the bathtub and sink, even if you subsequently plan to use the plumbing installed by the developer. Removing cladding or removing paint. Cleaning the ceiling, wall and floor surfaces.
2. Installation of communications. At this stage, unsightly pipes and electrical wiring systems are replaced, and the quality of the main riser is checked, especially if the bathroom is combined. Installing a ventilation system is also an important step. Modern equipment provides forced ventilation, which is a benefit for the owners of the premises.
3. Alignment of walls and ceiling. Very often the question “ Where should I start renovating a bathroom in a new building?”
?, the inhabitants answer - from leveling surfaces. And they turn out to be wrong. Before this, as you can see, there are a few more points. When leveling walls and ceilings, plaster is used if the walls are crooked. But today this is rare. Developers try not to lose their face, so they carry out work at a high level. Thanks to this, those moving in can only plaster the walls and corners.
4. Finishing work. This includes painting, covering with selected mixtures, laying ceramics or other tiled elements, and installing suspended ceilings.
Tiling in the bathroom and toilet
5. Furnishing the bathroom with plumbing fixtures. Installation of plumbing is carried out after finishing of all surfaces.
6. Final stage. At this time, the sets are placed, the last parts and accessories (lighting fixtures, mirrors, shelves, hooks) are arranged and installed. The last thing to do is replace the doors.
Advice. When installing a bathroom that is closed from below with a screen, you do not need to lay tiles in this part of the bathroom.
Development of an apartment plan
At the preparatory stage, the location of the internal partitions is determined. If some of them are in the way, and the owner decides to remove them, you must obtain permission to do this, and violation of this requirement can result in serious fines. If, on the contrary, it is necessary not only to determine where they will be built, but also from what materials.
Source: gipgips.ru
After the general layout of the space is finished, they determine how large household appliances and furniture will be located. This is necessary in order to correctly lay the required communications, electrical wiring, ventilation, and communication systems.
How to competently decide where to start renovating a bathroom in a new building
How long does it take to renovate a bathroom?
Who can help you decide where to start renovating a bathroom in a new building?
? You can do this yourself, based on tips from relatives, friends, acquaintances, or by contacting specialists. In the latter case, you can trust the masters and just accept the work. Professionals will not only assess the condition of the room, but will explain whether work on dismantling surfaces is necessary and whether it is worth leaving the plumbing installed by the developer. There is another way out - to buy an apartment at a higher price from a developer who will provide decent flooring (laminate), install good interior doors, and select and install high-quality plumbing fixtures.
But if the premises were purchased from a standard developer, you can free yourself from the tormenting question of where to start working on a bathroom in a new building
, — and contact a specialized company. It is desirable that her services are of high quality and the price is affordable. Like .
At the same time, you can order turnkey finishing. This gives its advantages:
- you can trust the experts and not constantly monitor the results of your work;
- saving effort and time.
From the article you received a theory of where to start working in a bathroom in a new building. And how this happens in practice can be seen in the video:
Generalization on the topic
Don't be afraid to use rough finishes. The article showed how impressive, beautiful and stylish concrete walls look in the interior - how to treat them to extend the life of the finish is also very clear. Treatment with a hydrophobic composition and varnish is considered mandatory if there is a high humidity threshold in the room.
A little more attention!
Write in the comments what you think - such simplifications of design make it stricter and more beautiful, or is it better to look towards proven classics?
Ratings 0
Read later
Modern design elements
Today you can choose a variety of interior designs for the bathroom, and thanks to modern technologies, the room becomes functional and comfortable.
It is worth describing the most popular new items that are used to decorate a bathroom:
- Rectangular bathroom. Now we are not talking about an ordinary bathroom, but about a product with wooden cladding. You can also purchase more budget models, in which the cladding will be made of material that imitates wood.
- Bathroom built into the podium. This is a rather original design option for the product, and it is advisable to use a large podium. Of course, this design is only suitable for a large room. The bathroom itself should be round or rectangular.
- Rectangular sanitary ware. This year, it is in fashion to decorate a room using rectangular sanitary ware, and it is advisable to choose a white toilet and sink.
- Hanging toilets and bedside tables. Such designs will complement the interior of the bathroom, and can also become part of the disguise of communications and wires.
In addition, it should be noted the lighting features of the bathroom; the finished appearance of the room after renovation depends on this. At the peak of popularity are unusual options for lighting systems, these include lighting of mirrors and niches, as well as built-in lighting on the floor.
Additional lighting makes the design unusual and functional. Indoors, lamps and bright lighting are usually not used; designers prefer spotlights.
When not to lay tiles on tiles
Using old tiles as a base is not permitted in the following cases:
- The room is small: a thick two-layer finish will steal a lot of scarce space.
- The old coating does not adhere well, as evidenced by a booming sound when tapped.
- The surface of the old cladding is uneven, with bulges and depressions.
- When finishing the floor: if with a new layer of tile covering it ends up above the threshold. This is especially true for the bathroom: here the floor should be lower than the floor in the hallway, so that when flooding occurs, water does not pour out of the room.
- Pipelines are laid under the old cladding and access to them is not provided. Old pipes will soon require replacement, which will require knocking down new tiles. It is better to knock down the old cladding, replace communications and lay new tiles on a clean base.
Also, old floor coverings are knocked down if necessary to change the slope of the floor.
Installing tile on tile saves a lot of labor and time, so if conditions allow, this solution is quite reasonable. It is only necessary to properly prepare the base, strictly following the recommendations of specialists, and then the new cladding will be strong and durable.
Purchase of building materials
It is recommended to divide the purchase of building materials according to the stage of repair that is happening right now. This will help you carry out work in parallel, without wasting time moving bags, furniture, and equipment from place to place. On the other hand, when purchasing all materials at one time, you can save time running around the shops, get a good discount, and save on delivery.
It is recommended to purchase tiles and plumbing fixtures in advance. There is a risk that the tiles will differ depending on the batch. Therefore, we need to take a little more, taking into account the battle. Since communication is carried out for a specific plumbing fixture, it must be available in advance so that the craftsmen can lay pipes for a specific model.
In order to move into the apartment immediately after the renovation is completed, it is best to take care of ordering built-in furniture in advance. Its production takes about a month, so after finishing and leveling the floor, you can safely call measurers.
Washing walls, furniture and plumbing fixtures
If there is a shower stall, then it should be washed last. While the walls and furniture are washed, the anti-plaque agent will deal with dirt more effectively and will take less time to wash. When the furniture and walls are completely washed, you can wipe the mirror and move on to washing the sink, bathtub and toilet. After everything is washed, you should wipe all surfaces dry, and polish the mirror and metal taps with a paper napkin.
Related links: Should I lay carpet in my apartment?
After such cleaning, it is advisable to ventilate the room, if possible, and then bring in all previously removed interior items and place them in their places. It is worth using rubber gloves and a respirator to protect your lungs and skin from harsh chemicals. It is advisable to keep these rooms clean regularly, then you will have to clean much less often, and the process itself will not take much time and effort.
Surface finishing
During the finishing process, wallpaper is glued, walls are painted, and tiles are laid. For each of these stages of work, you can write a separate article, so now we will make do with only general recommendations. When choosing materials for finishing, choose not the cheapest ones. Choose non-paper based wallpaper, tiles with an interesting structure, texture and pattern, paint based on its color saturation, ability to resist fading in the sun and other properties.
The decoration of the walls will look interesting. Here you can give free rein to your imagination. But in any case, it is worth remembering that the topcoat is something that will be visible all the time. Therefore, special attention must be paid to finishing. After all, the slightest irregularities will be evident. If small defects are allowed during rough finishing, then not during finishing.
