Do-it-yourself tropical shower, what you can make it from, Master Class

Who doesn’t dream of finding themselves in the warm shower of hot equatorial latitudes instead of taking a shower? A new piece of plumbing - a tropical shower, simulating the flow of rain in your shower stall or bathtub, can give you such sensations. Manufacturers of such shower systems are vying with each other to promote the beneficial therapeutic effect of such a procedure, but what will such pleasure cost? Or maybe home craftsmen are able to independently build a water supply system no worse than the factory one?

Description

The new “tropical” shower is simply a wide watering can in various designs, located fixedly above the person. Unlike inexpensive options, high-quality products allow you to distribute the water flow evenly over the entire area of the shower head. Formally, a tropical shower is a whole plumbing system consisting of not only a watering can, but also a mixer. A real rain shower is equipped with a system for mixing water with air inside the shower head; this effect is achieved using special grilles or other structural elements inside the plumbing element.

Therapeutic effect

The positive effect of a continuous flow of water in “tropical shower” systems has been used in sanatorium and medical institutions for quite a long time. Typically, the use of tropical systems involves the use of different temperatures, as well as light and color therapy, the beneficial effects of music and even aromatherapy. The shower itself has a relaxing and light massage effect; drops of water, falling from a great height under the influence of natural gravity, gently envelop the skin, allowing the body to relieve the stress of a tiring day. A cool shower with medium-strong jets, on the contrary, can set the body up for active activity, and a more powerful water pressure tone the muscles.

Tropical shower in the bathroom interior

Ceiling shower heads, produced under well-known brands, are mainly represented by hanging shower heads lowered on a rod. Some models are mounted to a holder on the wall rather than on the ceiling. Such designer sanitary ware can enrich and even embellish the interior of any room.

Built-in overhead rain shower

Therefore, today it can often be seen in the rooms of expensive hotels and spa salons, as well as elite fitness clubs. To use such systems in an apartment or house, it is advisable to have a spacious bathroom.

Unlike a conventional shower, which often disrupts the harmony with its unaesthetic appearance, tropical ceiling models often involve their integration into a suspended ceiling. This is not bad from the visual side, so they fit perfectly into the interior of the bathroom. Manufacturers produce models with nozzles of different shapes; with their help, it is possible to add zest to the interior if, for example, you install a tropical shower that matches the style in the bathroom. The design, a photo of which can be viewed on our website, clearly proves this.

Top tropical shower head in the bathroom interior

So, for a classic-style interior, a round or oval watering can is better suited, while modern or high-tech styles will complement and decorate a tropical shower with LED lighting. By the way, the lighting can be chosen either in a contrasting color to the main decoration, or in a harmonious combination with the texture and color of the walls. The design design of the light will be more vibrant and memorable.

Models for curtains

Not so long ago, curtains for the bathroom were purchased for only one purpose - to prevent water from leaking out and leading to the creation of unpleasant situations (for example, flooding of residents of apartments on the lower floors). Today, the capabilities of this accessory have expanded significantly. Modern booms perform a range of tasks.

A curtain is not considered a mandatory attribute of a bathroom. However, its presence makes it possible to have privacy while taking a shower or bath. With one movement, the curtain can be easily closed and creates a comfortable corner for a person. In this case, water will no longer get on other objects in the room or other people there, which is especially important for combined bathrooms. In addition, placing the curtain on the rod ensures safety, since it is easy to slip and get injured on a wet floor surface.

There are showers that consist of a bowl without walls placed in the corner of the room, a mixer with a hose and a watering can. In this case, the curtain on the rod serves as a beautiful and effective analogue of partitions. This significantly saves money, since purchasing such devices requires less money than, for example, installing glass barriers. The range of shower curtain rods presented on supermarket shelves is quite large. Therefore, you need to research the different types of these items before purchasing. The classification of rods is carried out according to the material used for its manufacture, as well as the shape and method of installation.

Features of system care

The main problem with the operation of a rain shower system can be the low quality of water, which contains various impurities. They negatively affect the operation of even the highest quality equipment. Clogged holes in the watering can restrict the flow of water and it stops working. This is not the manufacturer's fault. To avoid deposits, it is necessary to install an effective main water purification system in the house.

To avoid the accumulation of sediment in the holes of the watering can, it must be periodically cleaned with special chemicals or folk remedies. The part is removed and placed in the product for a certain time. The patency of the holes will be restored and the shower will start working.

Users often complain about low water pressure. Instead of the expected tropical downpour, there is a stream barely oozing from the watering can. Perhaps it's all about the pressure of the water supply. With different water supply systems in apartment buildings, there may be an increase or decrease in pressure on different floors. To solve the problem, try contacting the service provider or management company, or install a pump on the water supply pipes.

Installation safety precautions

To avoid unpleasant consequences when installing a shower yourself, consider the following rules:

Before starting work, all valves and meters must be closed. This will eliminate the risk of a sudden flood.
When using electrical appliances, you should wipe your hands dry.
Children should not be allowed near the work site. They can swallow small parts that are scattered on the floor.
Installation begins only after reading the manual.

If you have fear or doubt, it is better to entrust the work to experienced craftsmen.

Design options

We will analyze two options for systems - rigid and with a flexible hose; they differ in the method of assembly, so a separate chapter will be devoted to each of the solutions. All you need to do is choose the mixer that best suits your operating conditions.

The upper location of the rain is most often used in factory designs

Fixed watering can

The work order is as follows:

First of all, you need to calculate what the total length of the system should be from the point of attachment to the barrel to the edge of the watering can, and it is very important not to forget to take into account the fact that when attaching, part of the pipe goes inside the container . Too large a size will cause the rain to be placed low, and tall people will wash, bending over and constantly hitting their heads, which is of course undesirable, since comfort is significantly reduced.

Advice! If the height is not enough to position the shower head or the outlet in the container is located on the side, then you can use one trick: weld a small protrusion on the surface and place the system at an angle, this saves height and allows you to direct the flow to the middle of the shower platform.

An original solution will allow you to get out of difficult situations very easily and quickly

Next, you need to make a pipe or buy a ready-made pipe . The manufacturing option is relevant when the length of the element must be large and it is unlikely that it will be possible to purchase a ready-made structure. The work is carried out as follows: first, a pipe of the required diameter is selected, after which a piece of the required length is cut and a thread is cut on both sides, the pitch of which must correspond to all other elements.

Of course, if ready-made cuts suit you, this will greatly simplify and speed up the work process

Assembly is carried out in the following order: first, screw the sprayer through the connecting nut or directly into the tap; do not forget to wrap the thread with sealing material . Next, a bend of the required length is attached to the crane; it can be either small or very long, it all depends on the design features.

This is what the assembled system looks like

Flexible hose system

Now let's look at how to make a shower head with your own hands, if you need to ensure its mobility and mobility, the work is carried out as follows:

First of all, you need to prepare a flexible element, the length of which should be calculated in such a way that it is convenient for you to use the system. For these purposes, both a ready-made version and other available elements made of PVC or other polymer materials are suitable.
For fastening, you will need special threaded adapters, but for reliability, the hose must be additionally secured using clamps made of stainless or galvanized steel.

This is what a hose adapter to a faucet or sprayer looks like

Next, you need to make an insert into the container; it can be either in a design with a hose or rigidly attached to the barrel. It is important that the water intake is 20-30 millimeters above the bottom level to prevent sediment from getting into the watering can, as this is not very hygienic and causes the holes to clog.

Another option for water intake is a hose attached to a piece of polystyrene foam, which allows you to always take water from the top, warmest layer, a very simple but effective option

Next, all the elements are connected to each other, pay special attention to the threaded connections, they must be well sealed to prevent any leaks.
After assembly, be sure to check the system for leaks to ensure that all components are securely attached. As you can see, the instructions are quite simple, and almost anyone can do the work.

Naturally, if any problems arise, you will not have a question about how to disassemble the shower head for cleaning or troubleshooting. In general, if all work is carried out carefully and from high-quality materials, then the durability of the system is very high - the structure lasts for many years without any maintenance.

Selection of water sockets

Before you begin to consider the rules for installing water sockets for connecting various plumbing equipment, you need to find out what devices are produced and what they are intended for.

Water sockets for kitchens and bathrooms can be classified according to three criteria:

type or number of bends;
material of manufacture;
method of attachment to pipes.

What materials are they made from?

To make water sockets for a bath or kitchen, the following are used:

stainless steel. The fittings are distinguished by a high margin of safety (withstand pressure up to 20 atmospheres) and high ). Can be used to connect pipes made of various materials;
galvanized cast iron. Fittings are cheaper (approximately 200 rubles), but no less durable. A significant drawback is the susceptibility to rust formation when the protective coating is damaged;
brass, bronze and other alloys. Medium The devices are no less durable than previous versions, can be installed on pipes made of various materials, are not subject to rust, and are durable. Brass and bronze are the most popular materials;
PVC and/or polypropylene. Plastic water sockets are characterized by minimal strength and inertness to corrosion. Recommended for use only on pipes made from similar materials.

Homemade options

Home craftsmen are ready to use their skills wherever possible, and can build a rain shower from scrap materials. A DIY watering can to achieve the effect of a rain stream is easily made from an optical disc container designed for 10 pieces. A plastic adapter to the shower hose is installed in the center of the base, the central axis of the discs is removed, and holes are marked and pierced on the upper surface of the cover: from 20 to 40 pieces. All joints and fastenings must be sealed, and a piece of rigid tube or a bracket with thick wire can be used as a holder.

Depending on your resourcefulness and availability of materials, you can implement other options for the “tropical shower” system with your own hands. What can it be made from, if not from standard plastic pipes completely and even backlit? This design involves a complete replacement of the watering can with several adjacent pipes with holes for water. The manufacture of such a structure will require at a minimum pipe connection skills, as well as other construction skills and knowledge in the field of electricity. It is difficult to judge how profitable it is to use several pipes instead of a common collector for all nozzles, and the setup of home-made systems is limited by the capabilities of the mixer.

Manufacturing methods

The easiest way, perhaps, is to make a homemade watering can from a plastic bottle. Narrow holes are made in the lid using an awl, a sharp needle or a soldering iron tip. But such designs look too ordinary. You can make a more original watering device using non-standard bottles. You can find them in the store without any problems, you just need to spend more time.

Pasting a structure of complex shape is very difficult. Coloring is often the solution. But it is used only when the surface is dense and does not sag. Any paint on a loose, unstable base will quickly crack.

In itself, such an appearance may look original - but this solution is acceptable mainly for dachas.

A watering can for flowers can be made from a very ordinary glass. Such a workpiece is more difficult to process. But difficulties of this kind are justified by long-term operation and attractive appearance. Sometimes they also take large ceramic mugs. You will no longer have to punch the irrigation holes with needles, but with a drill. Drilling should be done as carefully as possible.

If the material bursts or becomes cracked, the workpiece will be hopelessly damaged. Therefore, it is better to spend an extra few minutes than to spoil your plan.

When the holes are punched, do this:

take a plastic tube of the same thickness as the hole;
cover the tube and glass with the same paint;
insert the tube inside the glass;
glue them together so that there are no places through which water can leak.

It is best to use mugs with a narrow neck. Excessive water will flow out through a wide outlet. As a result, you will have to use the already modest capacity only partially. When it is necessary to pour out a large amount of water for indoor plants, it is advisable to use a different design. An enlarged watering can is made from detergent bottles.

To make it more beautiful, chaotically located lines are applied using the most ordinary paints. This technique will create the impression of an avant-garde garden tool.

A nice side effect is that the dirt will become less noticeable. You can prevent the pattern from washing off by covering the watering can with a layer of varnish. If done correctly, it will even be possible to leave the sprinkler in the yard as a decorative element.
Some people prefer to make watering cans from canisters. All oily liquids and flammable substances must be washed out in advance. Otherwise, plant safety is not guaranteed. The pipe is often formed from tin. It is recommended to prepare a meticulous drawing in advance to eliminate accidental errors.
The curved edges of the tin sheets must be carefully attached to each other. For this operation, beaters or mallets are used. The tube must be placed in the prepared hole. Next, the tube is pulled onto the tap, and another section of it is placed at the other end of the tap. The rigid tube must be carefully pulled onto the protruding part of the flexible channel; the connection must be airtight, so you should pull it all the way.
Once the installation of the tubes is completed, attach the strap to the handle of the canister. Select the belt length at your discretion. To create a nozzle that sprays water, you usually take old photographic film containers. In the lid of such containers it is necessary to punch a hole of the same diameter as the rigid tube. In the other part, a lot of holes are prepared.

Manufacturers of tropical shower systems

The leading positions among manufacturers of rain shower panels are occupied by Novellini, Bossini, Hansgrohe, which have many years of experience and have long earned a good reputation in the plumbing market. The products produced by these companies are, as a rule, in different price categories, but always of high quality.

Otler Amber rain shower model

Luxury plumbing is quite expensive. In addition, when installing it, it is often necessary to lay additional water pipes that will supply water to provide the rainfall effect, which further increases its cost. But at the same time, models belonging to the elite class have many advantages: a large nozzle that sprays water, several shades of backlight that can be switched, and a number of additional rather pleasant options, for example, several irrigation options, remote control.

Today, some of the manufacturers, still less well-known, often offer relatively inexpensive shower systems that they advertise as tropical. In fact, these are the most ordinary spray nozzles of slightly larger sizes, and the water from them is supplied in a simple stream, without mixing with air, so they cannot create the effect of rain.

Types of equipment

There are several types of structures:

Rack

Functional, universal device. The design consists of a rod mounted to the wall. A watering can, which is larger in size, is attached to it. Water supply is carried out using a flexible hose or a stationary stand pipe.

Panel

Such designs are suitable for cabins and baths. The body combines a watering can and a mixer. The water supply system is hidden. Additionally, hydromassage nozzles are installed in it, as nice bonuses - a thermostat and lighting.

Mixer with rain shower and tap

It is universal, convenient, and relatively inexpensive. It has a large watering can (up to 300 mm) and is mounted on the wall. But it does not provide a full-fledged storm effect - the flow is not enough to cover the entire body.

Rack, panel and faucet

Installing plumbing fixtures such as a rain shower with faucet or a custom wall panel should not be a problem for experienced DIYers, except when installing new or additional pipes into the wall. The stand or panel is securely attached to the wall using hidden screws, the mixer can be installed in place of the old one, fortunately, standard sizes are used in almost all models. It is better to carry out pipe laying work at the stage of repairing the room.

Installation height of plumbing fixtures: SNiP requirements

The installation of sanitary ceramic products should be carried out in accordance with the requirements of SNiP 2.04.01-85, technical conditions and instructions of equipment manufacturers. The height at which sanitary fixtures are installed should be taken in accordance with SNiP 3.05.01-85.

At what height should a shower head or rain shower be installed? Finishing works Tyumen.

When purchasing plumbing fixtures, the presence of invisible cracks is determined by ear by tapping the product, located on a wooden stand, with a wooden hammer weighing about 250 g. A product that has cracks makes a rattling sound when tapped.

The presence of nicks and scratches is determined visually by wiping the surface of the product with a cloth soaked in a 0.1% solution of methylene blue solution. If there are nicks or scratches, they are filled with a blue solution and are detected visually without the use of magnifying devices.

Shower system options

At first glance, the rain shower, the photo of which is presented below, seems to be a simple product, but it can be made in different versions:

In the form of a panel designed primarily for a shower stall.
In the form of a stand for taking water procedures in the bath.

Even the design of each of these options may be different:

Panel creating tropical rain. The model in this version is the most expensive, since in most cases it has a hydromassage nozzle that supplies water in small streams. Some models of such panels have a number of additional options, for example, different colors of backlighting, radio and much more. Despite the fact that such a rain shower head is intended for a shower stall, it can also be used in bathtubs.
Shower panel
Installing such a panel in the corner of the bathtub allows you to expand the functionality of the sanitary container. This model has the advantage of combining a watering can and mixer in one body.
Tropical rain effect stand. This design of the shower system is the most optimal in terms of price and functionality. The stand, like the panel, is quite versatile, so it can be installed both in the stall and above the bathtub.
Shower column for rain shower system
At its core, the stand is a metal tube with fasteners for screwing it to the wall; at one end there is a spray nozzle that creates the effect of a shower of warm tropics. To tell the truth, this device is very similar to a regular shower with a flexible metal hose, only in this case the nozzle is much larger. Such racks can be equipped with a flexible metal hose that supplies water or with a pipe through which water is supplied to the watering can.
Mixer with rain shower. The main difference of this device is the spray nozzle with a diameter of 25 - 40 cm included in its package. It is worth saying that due to the small width of the water flow, which does not cover the entire body, it is impossible to obtain the full effect of heavy rain from the device in this embodiment.
Rain shower faucet parts
Just like the stand, a rain shower with a mixer can be connected with a flexible metal hose or tube.
Shower head with tropical shower function. This option is the most profitable due to its low cost.
Shower head with lighting
With this nozzle you can only create a semblance of torrential rain, since such a watering can is installed on an existing hose. Even if it is possible to achieve the desired flow of water, the resulting result will not be truly effective, but only slightly reminiscent of a warm downpour.

Having studied the above systems, comparing their capabilities and prices, we can come to the conclusion: in order to get maximum pleasure and benefit from taking water procedures, you need to make such a device with your own hands.

Types of shower systems with rain showers

Technological process for assembling a tropical shower with your own hands

It is worth noting that of all the plumbing fixtures that you can assemble yourself, the easiest one is to make an overhead rain shower with your own hands. The assembly process is quite simple, and most importantly, nothing special is required. To work, you will need to prepare a large watering can, mixer and water pipe.

You can, of course, perform an open installation of the system, but it is better to prefer a hidden installation, in which the mixer is built into the wall. It is advisable to combine the installation of the system with the next repair, but do it before laying the facing begins, since it will be necessary to hollow out grooves in the wall. The implementation of the idea of installing a tropical soul house should be carried out in stages:

At the first stage, it is necessary to lay out the pipes. Why is a system of several grooves built?

Wiring for a watering can and tropical shower
In the middle of it a recess is created for the mixer. And from the recess it will be necessary to remove 4 grooves, into which pipes will be laid that supply water to the mixer, fill the bathtub and direct it directly to the watering can.
At the next stage, prepared pipes of the required length are laid in the grooves (it is better to choose copper or polypropylene products for hidden installation). The pipe to the shower head runs up along the wall and slightly across the ceiling all the way to where the sprinkler is located.

Installation of pipelines in the bathroom
On the ceiling it can be laid in a groove or secured with metal clamps. If in the future it is planned to install a suspended ceiling, then the pipe is not brought to the main ceiling. Suspended ceiling structures allow you to hide the pipe, leaving only a watering can on the surface.
At the last stage, the nozzle and lever for controlling the mixer are installed. When screwing the spray nozzle onto the pipe, you need to place tow or FUM tape.

After the watering can is securely fastened, you can take water procedures, but it is still better to do this when the renovation work in the bathroom is completely completed.

Construction stages

One of the main steps to fulfilling the idea is purchasing the necessary equipment and planning. There is no point in saving on plumbing components; after the work is completed, it will be problematic to make adjustments; you must be confident in the equipment. The ideal purchase option would be models from well-known brands; manufacturers value their reputation and monitor the quality of their products. Reasonable design can also eliminate possible problems in the future; access to the main components should be considered in order to replace them in the event of a breakdown without dismantling the covering of the walls and ceiling. Another condition for achieving the maximum effect from a rain shower will be a ceiling height of at least 2.3 m.

The next step is to clean the old wall coverings and, if necessary, the ceiling and floor.

After transferring the drawings from paper directly to the walls and ceiling, you can begin laying pipes. The ideal option is to cut grooves under the pipes; this installation method will save as much space as possible in the room. It is possible to equip a separate shower area from moisture-resistant plasterboard, then the pipes can be “hidden” directly into the partition. Entrance doors should be considered; for example, when installing models on casters, you need to strengthen the floor covering under the lower runners.

Installation of special lighting may require an additional electrical line and installation of associated electrical equipment. It should be ensured that direct flows of water do not enter the connection points and, in general, any non-insulated current-carrying parts of the electrical system. The ideal would be a hidden installation in the ceiling, which can be made in a suspended or tensioned version especially for these purposes. Apartment owners should consider possible leaks from neighbors above and protect those below. To do this, it is necessary to carry out enclosing waterproofing of electrical equipment in the ceiling and complete waterproofing of the floor.

The next stage will be installation and testing of all plumbing elements of the system.

After making sure that the connection is in good working order and correctly, you can begin arranging the ceiling and cladding the walls and floor.

Replacing the watering can

The simplest and most cost-effective option for transforming your bathtub or shower into a source of equatorial shower is to replace the shower head with a special wide model. Of course, it will be difficult to achieve the full effect, but you can refuse the services of specialists. Additional materials may require plumber's sealing tape to seal threaded connections, but usually the rubber gaskets included with the purchased nozzle can cope with any leaks without additional effort.

How to choose

When choosing rods for curtains in the bathroom, remember that it should not only be attractive in appearance, but also practical and lightweight. For example, if you do not like extraneous noise, then plastic will be ideal, since the movement of the rings along the metal rod will create additional sounds. To prevent this from happening, it is best to choose metal rings with an additional plastic coating to attach the curtains to the rod.

The minimum service life will be ensured by telescopic rods with vacuum pressure to the surface. This design can break from the slightest careless movement or sudden opening of the curtains. Not all rods are able to withstand heavy curtain models without deformation; this is important to remember when choosing. With a large length of the rod, you cannot do without ceiling or wall fastenings, which, if desired, can be turned into room decor. When purchasing a curtain rod, you need to pay attention to some nuances:

connecting parts should occur without difficulty;
Each structural element must be intact, without chips or defects. The coating of the rod must also be of high quality;
all fastenings must be made of moisture-resistant materials.

Sources:

https://vanna-expert.ru/santekhnika/shtanga-dlya-dusha-v-vannu.html
https://stroy-podskazka.ru/vannaya/dush/shtanga/
https://VannayaSovety.ru
https://FB.ru/article/241730/shtanga-dlya-dusha-v-vannuyu-foto-ustanovka
https://vashavannaya.ru/dushevye-stojki.htm
https://GazPribor-Tambov.ru/santehnika/kak-prikrepit-derzhatel-dlya-dusha.html
https://gidroguru.com
https://KrepezhInfo.ru/kreplenie-dlya-dusha/
https://VannayaSovety.ru