Review of Jacob Delafon bathtubs: description and customer reviews

Product Features

Acrylic bathtub Jacob Delafon

The Jacob Delafon bathtub is manufactured using unique methods developed by the company. Models vary in shape, color, design, and equipment.

They have advantages over other products:

• wear resistance;
• high thermal conductivity;
• long service life;
• wide price range;
• great design.

The main disadvantage is the high cost. Even economy models are more expensive than analogues of other brands.

Reviews for Bathtubs Jacob Delafon

Alexander T.

Product: Acrylic bathtub Jacob Delafon Patio 170x70

Advantages:

The bathroom is good. The quality is excellent, the thickness of the acrylic corresponds to the declared one. Acrylic is wear-resistant, almost every day our children wash themselves and something falls into the bathroom - a shower head, toys, laundry basins, ladles and the like.

Flaws:

Very slippery bottom. As soon as you get soap or shower gel under your feet, you feel like you’re on a skating rink, given the rather decent slope of the day towards the drain. Still, 70cm is not enough, given the gentle slope of the walls. There is a wide place at the drain and a narrow place on the opposite side. If anyone plans to lie in this bathtub, keep in mind that it is for slender people with narrow shoulders.

A comment:

You can take the frame for the bathroom, or you can leave it out. In any case, it is necessary to firmly fasten the long edge of the side, which is adjacent to the wall, otherwise normal sealing of the seam will not work, given the reverse slope of the side away from the bathroom. If a rigid front wall with tiles is not intended, as many do, then the long front edge must also be strengthened. In general, the long side of all acrylic bathtubs is their weak point. The bathroom is prepared for the frame - the corners for the frame supports are reinforced, the bottom is reinforced. Frame with five support points (legs) all adjustable over a wide range. However, during installation, the frame must be correctly rotated relative to the bathtub so that it is level. When purchasing a bathtub with a frame, be sure to take into account the space for the legs of the frame when laying the pipes, so that you don’t have to move it later. I did it myself with a frame and also a rigid apron in front. Those. the frame allows you to build a thin brick wall under the side wall and cover it with tiles - there is enough space. Pay attention to Overflow - do not take a hard overflow if managers recommend it to you - I trusted the manager and flew through. I took a hard overflow from a well-known brand (expensive) and it did not fit due to the geometry of the wall with the overflow. I had to take the usual soft overflow-drain, which fell into place perfectly and works, but I can’t put the expensive hard one anywhere, because... I bought it from an online store. And in conclusion, I will say that for this model, the width of 70 cm is not enough to comfortably take a bath with foam. The side opposite the drain tapers quite quickly to the bottom and only a teenager or a slender girl can fit there comfortably. For my wife with parameters 92-63-93, the bathroom was a bit cramped. If you plan to lie in the bathtub and have wide shoulders or hips, then choose a wider bathtub or another model with a steeper slope of the walls.

Material of execution

Bathtubs are produced mainly in two versions: acrylic and cast iron.

Acrylic

To produce these products, two sheets of acrylic, each 5 mm thick, are used, with a layer of mineral composite poured between them.

Acrylic bathtubs by Jacob Delafon are distinguished by:

• wear resistance;
• strength;
• resistance to loads;
• heat resistance;
• pleasant appearance;
• long service life.

The surface is treated using BioCote technology, which provides antibacterial protection.

Cast iron

The cast iron bathtub from Jacob Delafon is particularly durable and will last more than 25 years.

Advantages:

• stability, thanks to the large weight of 120 kg, the structures stand securely on any surface;
• such products are not afraid of mechanical shocks, chips and scratches do not form;
• they have a high degree of heat conservation, the water remains warm for a long time;
• there is no noise from flowing water.

Cast iron products do not come in a wide variety of shapes; rectangular and oval models are available.

Reviews about the brand

1. “Compact but stylish”, Vladimir, Orel. The quality is excellent, I have known this brand for a long time. When purchasing, I consulted with the Skybuy manager about coverage. In the end, I was satisfied with everything except my own self-confidence. I thought that for my height of 170 cm this small bath would be just right. However, practice has shown that it is short for me. It's hard to fit in.
2. “Cast iron basin for big money”, Maria, Moscow. Never look at the sizes in the store! They create a misleading impression. The Delafon cast iron bathtub is terribly expensive, but at the same time very inconvenient. The consultant insisted that for my height (173 cm) its depth would be sufficient. However, it is not. A shallow container with a flat back is more suitable for children than for adults. It is impossible to fit the legs, the water squishes out... The capacity of the structure is no good. At the same time, the seller also dissuaded us from the acrylic option, convincing us that cast iron is a plumbing ideal. Scoundrel. And scratches appeared on this prehistoric metal almost immediately. My husband said that we would sell it for scrap metal and buy an acrylic bathtub from another seller. And, most likely, we will take the corner option.
3. “Jacob Delafon - in cramped conditions, but not offended,” Alina, 34 years old. Anticipating the pleasure of taking a bath, I was severely disappointed. My Melanie model turned out to be too small for my favorite water treatments. For some reason, the narrow and cramped bathtub in the store looked wider. Maybe the light was set that way... My husband says we bought a bath for the children. Only they will be able to splash around in this cramped bowl. We can’t even sit normally in it. There is simply no free space to comfortably stretch your legs.

   Bathtub of unusual shape in the manufacturer’s assortment

   Read also:  How to repair and lubricate a faucet with a cartridge?

   It’s impossible to relax. The only positive aspects can be considered the quality of the material. The durable cast iron base does not crack and has a smooth enamel surface. The color remained the same even after a year of use. The heaviness of the metal somewhat obscures the interesting design. I especially like the fittings - the handles on the sides. They probably played the role of the tempter. So now I have experience. I won’t fall for beautiful trinkets a second time.

4. “Jacob Delafon has been working flawlessly for 7 years,” Andrey, Izhevsk. I'm happy with my model. When I bought Jacob Delafon in 2010, I paid attention, first of all, to quality. And I have never regretted my choice. Although enough time has passed to reconsider my opinion. The appearance of the bathtub clearly makes it clear that this is not a domestic product, but a European one. The stylish shape complements the representative design with holes for handles. These fittings are wonderful for helping you get out of a full bath. Now I can’t imagine how you can do without them. There are no complaints about the quality of the coating, but an anti-slip mat is a must. And over time, you will have to deal with the regular yellow coating that appears after several showers. However, these are minor things compared to the advantages. No one in my family complains.
5. “Fragile enamel”, Sergey. When the renovation was completed, I decided to install all new plumbing. I bought the Delafon model after I saw a beautiful photo on the Internet. Installed. And I got upset. I already miss my old, Soviet trough. The fact is that it was much wider and deeper. Delafon is more suitable for thin or short people. If not for children. There is frankly not enough space. Another disadvantage is the appearance of scuffs after two years. And this despite the fact that no one uses harsh chemicals to clean it. The paint doesn't peel off, but the rough texture is somewhat confusing. These small scratches on the fragile enamel will eventually cover the entire bathtub. And then you will have to buy an expensive Chinese container again. This is only the origin of the brand is French. Production has long been in China. If I find it, I’ll buy myself a Soviet-style model.

   Jacob Delafon also produces models with storage organization

• Advantages: Beautiful, reliable;
• Disadvantages: Brittle enamel.

Configuration

Rectangular design

Bowls vary in form.

Rectangular

Suitable for any interior. They have sharp or rounded corners. There is a special protrusion for the head and a special curve of the back.

Bath-shower

Small products with low sides provide increased space for showering. The design is equipped with a step and a glass door. Suitable for a small room, they act as a bathtub and shower. Dimensions are 120x140 cm.

Asymmetrical and angular

Fits perfectly into small bathrooms. Semicircular, triangular, and trapezoidal models are especially popular.

Freestanding

Such products are the embodiment of luxury and wealth. Bowls are made in the shape of a circle and an oval. They differ in decor on the outside, graceful legs and handles.

The advantage of Jacob bathtubs is the large selection of sizes:

• compact products are produced for small rooms, measuring 120 x 70;
• standard models, 170 x 75 cm;
• the longest bowls are 180 cm;
• corner structures 120 x 120, 150 x 150 cm.

The depth of the bowl reaches 50 cm in height, there are small options.

Jacuzzi

Acrylic bathtubs from the Jacob Delafon company are available with a hydromassage function. The bowl size of this product is from 135 x 80 to 180 x 145. Compact models are designed for small rooms. Spacious structures designed for two are installed in large rooms.

Advantages:

• simple control panel;
• noiselessness;
• availability of water heating mode;
• chromotherapy;
• automatic drying system.

Jacuzzis are durable and vibration-free.

Wall-hung toilet Jacob Delafon - reviews

Turmeric

We bought a Delafon toilet from Leroy Merlin, damn it. When purchasing, you cannot select a specific toilet; the order is delivered. So they brought it: the lid doesn’t fit the tank, it hangs over by a centimeter, and it’s also cracked! I don't recommend it to anyone.

Fluffy666

https://irecommend.ru/content/evropeiskii-srednyachok

When they were renovating the bathroom, my husband’s dream was to make a wall-hung toilet with an installation. We went to choose and in the plumbing salon the consultant sang the praises of the French brand Jacob Delafon. They bought it because it’s beautiful))))

First, about the advantages - a large assortment and plenty to choose from, smooth shapes and aesthetics of the product, high-quality coating, a beautiful signature label on the lid... That's all...

But behind the famous name there are also many disadvantages.

So, for example, these toilets are still made in China))))

The price-quality ratio is not in favor of the price; for the money you can look for something better. The design is beautiful, but for some reason the manufacturer didn’t think of at least thinking about covers for the bolts fastening to the wall; they’re not noticeable unless you know them, but it’s still unpleasant.

The mechanism for smoothly lowering the lid is also strange and somehow unfinished. The lid closer works very slowly, the lid will go down in about 20-30 seconds... well, in general, it will only work if the lid is fully open; if you open it a couple of centimeters to throw out a piece of paper, the closer will not work and will crash on the seat.

This is not the case, but for the money it would be nice to get it: there is no padding on the lid itself to prevent it from hitting the wall.

In general, next time we will approach this matter more seriously, but this brand did not justify itself. In general, this is European consumer goods, and not luxury, as it is praised in the store.

P.S. An installation always comes with a wall-hung toilet. Therefore, keep in mind that its installation is another +10,000 for installation and -15 cm of space in the toilet (the installation is sewn under drywall). We have a Geberit installation - we have no complaints about it.

Kirill

https://www.kabini.ru/otzyvy-unitazy-jacob-delafon/

The Jacob delafon presquile e4440 toilet did not cause much delight. It’s not worth the price, although the quality of the porcelain itself is normal - and that’s all. It turns out that I paid money only for the non-standard appearance and the lid with a lowering mechanism.

Novel

https://www.kabini.ru/otzyvy-unitazy-jacob-delafon/

The purchase of the Jacob Delafon toilet brought me nothing but disappointment. I took the Huno E4380 model and the tank for it. After a while I saw a chip on the rim under the lid. I bought it online, so perhaps the damage appeared due to irresponsible transportation, but I didn’t notice it right away, although I carefully examined it. In short, it's a mess as always. Maybe it’s just me who was so lucky, but I definitely won’t recommend toilets from this company to anyone.

S.Andrey.1988

https://peredpokupkoy.ru/otzyvy-jacob-delafon-odeon-up-e4570-00-12524746/#addreview

Advantages:

I liked the appearance

Flaws:

It is noisy when flushing. It feels like the toilet is “grunting” - I really didn’t like it, it’s annoying.

We also bought a rimless toilet for another toilet, there is no such thing there.

So I don't recommend this one. If anyone is interested, I can send you a video of how it works.

There was no warning about this feature.

[email protected]

https://market.yandex.by/product—unitaz-jacob-delafon-odeon-up-e4570-00/12524746/reviews?glfilter=7893318%3A1565744&track=srchlink&show-uid=15516460706568414564116011

Advantages:

1) Does not splash, unlike other rimless toilets 2) porcelain material - dense structure, ensuring resistance to various stains

Flaws:

Very noisy, incredibly noisy!

A comment:

I wouldn't take it again...

Alina-1

https://otzovik.com/review_6662088.html

Advantages:

No

Flaws:

Complete lack of quality

When renovating a bathroom, I purchased a toilet and a seat with a Patio microlift from Leroy Merlin from Jakob Delafon. Since I don’t understand plumbing, I bought it based on appearance, not from the cheapest line. Within three months of operation, the tank, or rather the flushing element, broke down, and after another three months, the seat microlift broke down. Thus, within 6 months, all the mechanical elements that could break were broken. All my attempts to contact the official Scanservice service center were unsuccessful. All my applications were accepted, but not a single master came. Every time I called with a question about the status of my application, I received the same answer: wait, the specialist will call back. It's been three months since the master called. Therefore, if you purchase anything from this company, you will NEVER be provided with service; given the quality of this company’s products, service will definitely be required.

Demidov13

https://otzovik.com/review_6743168.html

Advantages:

no

Flaws:

quality

We bought a Jacob Delafon Patio wall hung toilet in Leroy Merlin (made in Morocco). During installation there was a terrible sewer smell. The repairmen climbed all the cracks and everything was sealed. The smell came from the depths of the toilet itself. As a result, we bought the simplest Jika and the smell disappeared. Most likely there is a fistula (a manufacturing defect) and through it air from the sewer gets in under the toilet rim. Next, call the Jacob Delafon service center. The people who work there are outright boors who don’t even have a clue that it’s important to introduce yourself during a conversation (I wonder why the conversation isn’t recorded). Well, then the fairy tale: “within 10 days the master will contact you, he will arrive when he can, etc.” etc.”And then as in the first review. Brief summary: do not be fooled by the 25-year guarantee (which is displayed in their booklet). Absolutely not interested in the quality of products and preserving the face of the office. The price does not correspond to the quality at all.

Popular models

Model “Elite”

“Elite” is made of acrylic, rectangular in shape. Features a classic design. Spacious bowl measuring 180 x 80 cm, light weight - 49 kg. The surface is covered with an antibacterial layer. For convenience, a special headrest is provided.

“Patio” size 150 x 70 x 39. Additionally, a frame, legs, panel, drain-overflow, and hydromassage system are purchased.

“Sofa” is a free-standing model, made of acrylic, rectangular in shape. Has standard dimensions 170 x 75. Classic version.

“Repos” is a collection of cast iron products from the brand. Offers several design options. They are characterized by increased strength and unlimited service life. The dimensions of the baths are 180 x 80.

“Parallel” is a line of cast iron models that enjoys special trust among customers. Bathtubs of standard sizes 170 x 70 cm are in demand. The backrest is located at an angle of 53 degrees, there is a silicone pillow for the headboard. Some models are equipped with handles.

Mounting and mounting options

Bath installation

For proper installation you will need the following tools and materials:

• frame;
• legs;
• hammer;
• Bulgarian;
• perforator;
• sealant;
• level;
• insulating tape;
• adjustable wrench;
• mounting tape;
• corrugated pipe.

Installation of products made of cast iron differs from the method of installation of acrylic models.

Acrylic bathtubs

These products are installed on a special support:

• factory frame, which is included in the kit or sold separately;
• on the legs provided for each model;
• The frame is made from bricks independently; this method guarantees the strength of the installation.

Procedure:

1. Assemble the frame according to the instructions.
2. Screw the legs to the base; it is not recommended to embed them into the floor.
3. Screw a nut onto the pin of the leg.
4. The height of the structure is adjusted using a level.
5. The screen is installed on plates that are located on the sides.
6. The inner edges of the product are treated with soundproofing material.
7. Fasteners are made on the wall; for this, dowels are inserted into the holes.
8. The joints are treated with sealant, leaving a gap of 5 mm between the walls.
9. The mixer is installed according to the instructions. To do this, make a hole on the surface of the product.
10. Connection to the water supply is made using flexible hoses.
11. The drain pipe is connected to the sewer through a special hose.

Electrical components are connected by electricians. To protect the circuit, an RCD is installed.

Cast iron models

Under these heavy products, the floor is leveled with a special solution. Choose hard floor tiles:

1. The bath is placed on the floor.
2. A hydraulic siphon is connected through the rings located at the top and bottom.
3. Secure the overflow and connect it to the pipe.
4. Two supports under the bathtub are securely fastened, they are secured with a coupling bolt.
5. The sewer pipe outlet is connected to the siphon.
6. The bath is turned over and leveled.

Waterproofing is done along the edges using curb tape or ceramic plinth.

Types of breakdowns

Proper care of the product ensures the absence of defects. To do this, use special products for cleaning acrylic surfaces, which are sensitive to chemical compounds.

Do not pour too hot water into the bowl, as this will cause deformation. Do not drop heavy objects.

If chips or scratches appear, the surface is restored. The work is carried out independently using a special repair kit. To restore the original shine, use acrylic polish.

After use, the bathtub is rinsed with water and wiped dry.

Cast iron products are characterized by increased strength, they do not deform or deteriorate. The presence of defects depends on the quality of the enamel. Chips and scratches gradually destroy the upper surface. The recovery process is quite complex.

Reviews

Anton, Samara : “We have been using the Jacob Delafon bathtub for a long time. It looks very solid, far superior to domestic options. The model is equipped with handles, making it very convenient to get up when the bathtub is filled with water. The surface slips a little, we laid a rug on the bottom. Overall, a comfortable, convenient, beautiful, stylish model.”

Andrey, Izhevsk : “I purchased a Jacob Delafon bathtub seven years ago, I am pleased with my purchase. First of all, I paid attention to the quality, it is excellent. Over the entire period of use, the appearance has not changed. Stylish shape, handles for convenience."

Denis, Moscow : “Excellent white cast iron bathtub. We've been using it for six years now and haven't had a single scratch in all that time. Very durable model, nice surface. The disadvantages include high cost. But this is a guarantee of quality.”

Choosing a bath

The choice of product is influenced not only by the parameters of the room, but also by the material of manufacture. Most often, prices differ for this reason. For example, the user properties of cast iron are valued higher than those of acrylic material. This is due to its ability to retain heat for a long time without becoming cold like steel. However, acrylic also has its advantages. This is the variety of shapes, lightness of the product, etc.

Advice. It is necessary to focus on all selection factors at once. Then you will be able to choose the optimal bath for your needs.

And to make the selection process easier, experts recommend paying attention to reviews from ordinary users. Studying the characteristics of a product is, of course, good, but the real opinion of the owner of a Jacob Delafon bathtub seems more clear. Therefore, next we will consider several reviews from buyers of bathtubs of a famous brand.

Bathtub model by Jacob Delafon