Laying tiles on wooden walls, how to do it

If you are faced with the task of decorating a wooden wall with tiles, then in this article we will tell you how to do it and avoid making serious mistakes. The fact is that wood, as a material, is not the most stable finishing option, for the sole reason that wood breathes, which means the cement base of the adhesive used for laying tiles can crack. As a result, your tiled wall will soon begin to crack at the seams and ultimately either lose its appearance or simply fall apart.

Let's start installing tiles on a wooden wall

First of all, you need to use any antiseptic in order to protect your wooden walls from rotting. Since wooden walls can absorb moisture, this is a very important point; do not neglect the use of antiseptic!
Afterwards you need to glue the roofing felt to the wooden wall. It will protect the tree from destruction. During the drying process, the cement mortar releases moisture, therefore, if you do not protect the wall with roofing felt, it will absorb all the moisture, thereby causing the formation of fungus or mold.
Next, at a short distance from the wall, you need to mount a metal mesh, which will serve as a reinforcing material and will prevent your wall from crumbling. To install the mesh at a distance from the wall, it is advisable to use slats. This way you will give the wood the opportunity to breathe without destroying your structure.
Afterwards, you need to roll the entire wall into cement mortar. Be sure to use cement mortar and not gypsum, otherwise you may have problems with the wall in the future. After applying the solution, it must be allowed to completely harden. Moreover, it is advisable to periodically wet the wall with water for three days so that the cement becomes as strong as possible.
Next, we move on to the work of cladding a non-wooden wall.
Before starting work, it is advisable to soak the tiles in water for 5 hours. Tiles soaked in moisture will have better adhesion, which will significantly increase their chances of durability.
Be careful, because sometimes due to a violation of the tile production technology, stains may appear on it when soaked. We recommend testing one or two tiles before soaking the entire material. Those tiles on which stains appear must be returned and replaced. If you don’t want to take risks, use a spray bottle with water and simply wet the inside of the tile.
The main thing when facing is to do everything smoothly. In simple terms, the first tiles set the vertical and horizontal of the entire future cladding. Therefore, use a bubble level or laser level to correctly lay out the first tiles.
When laying tiles on the wall, use crosses to ensure that the width of the joints between all tiles is the same. At least two crosses are installed on each tile. It is advisable to install along the edges of the tiles to avoid accidentally bevelling.
The solution must be laid on the inside of the tile, leveling it with a comb or trowel, and then apply the tile to the wall.
If excess mortar appears along the contour of the tile, simply remove it using a scourer.
After the solution has completely hardened, it is necessary to remove all the crosses, clean the horizontal and vertical seams, and then fill the solution with plaster, or better yet, with a special grout for tiles.

Grouting joints

After finishing the laying work, the tiles are left for some time (1-2 days) so that the glue fixes the tiling. Then they begin to grout the tile joints. This will require the appropriate tools and materials.

It is recommended to choose special antifungal mixtures. This is a necessity in rooms with high humidity.

Apply the grout carefully with a rubber spatula so that the seams are equally beautiful. After the filler has dried, the tiles should be wiped with a dry cloth to remove any remaining mixture from the tiles.

Is it a good idea to tile wooden walls?

Frankly speaking, if we consider the option of finishing wooden walls with tiles, or finishing walls with another material, the following conclusions arise.

If you have never laid tiles on wooden walls, then it is better not to risk it and hire a professional who specializes in such work. In this case, you will at least be sure that your wall will not crack after a while, and most importantly, you will be sure that the process of wood rotting and the formation of mold and mildew has not begun under the tiles.

If you decide to do the work yourself, we strongly recommend that you choose another material for cladding that does not require such careful preparation of the walls. Otherwise, simply try to comply with all the necessary technical points in order to reduce possible problems to a minimum.

Summary

It is possible to lay tiles in the bathroom on the walls and floor in a wooden house, the main thing is to find the optimal approach.

Gluing ceramics directly to walls and floors is possible only with special adhesive solutions based on epoxy resins or polyurethane; the use of cement-sand glue with additives can cause damage to the base - saturating it with water and insulating it from air.

Experts still recommend using an integrated approach to cladding and installing an additional base of plywood or drywall - this is exactly what real professionals do. This method has a number of advantages:

the main wood does not suffer in any way, therefore it retains its properties and integrity longer;
the cladding can be dismantled at any time, again without harm to the main wall or floor;
The wood has constant contact with air, which means it does not accumulate moisture and does not dry out, and the natural balance of moisture inside the timber is maintained.

Whatever installation method is chosen, special attention should be paid to adhesive compositions: read the instructions and description. Perhaps the mixtures have narrowly targeted properties that are suitable specifically for your room (humidity, type of materials used, etc.).

Exterior finishing

What are the reasons

Even if there are minimal conditions for the formation of humidity or generally changes in temperature conditions, the wood will expand and contract depending on the air.
The tiles and the mortar itself also have the ability to change depending on air humidity and room temperature.
The tile itself is very fragile, it is comparable only to glass, so for its installation you need the most static base.
Wood, even covered with tiles, will still absorb moisture from the environment, so without any care it will begin to rot and form fungus and mold.
The seams, which are made of gypsum grout, will begin to crack soon after installing the tiles on a wooden wall, and then your tiles will begin to crack.

Which tile adhesive to choose

To install ceramics on a wooden or plywood base, you should choose an elastic adhesive based on:

polyurethane;
epoxy resins.

These materials serve as both fasteners and waterproofing. Glue with natural and artificial resins is sold in finished form, and two-component adhesives are sold in powder form, which must be diluted with water before use according to the instructions.

You can also use “liquid nails”, which are suitable for working in wet conditions. These retain their load-bearing properties even when exposed to moisture; the usual composition for bathrooms and kitchens is a short-lived option.

Block house for wall cladding

Some apartment owners strive to make their homes original and even extravagant in some ways.

So if you are tired of boring solutions, then pay attention to the block house, that is, a board whose cross-section imitates the rounded log known to everyone from village landscapes. Using this material you can achieve a real “rural” interior in your home.

To make the design look even more impressive, it is recommended to resort to a method such as artificial “aging” of the wood. For this, the method most often used is “brushing”, that is, processing the material with a wire brush. During the processing of wood, fibers are removed from it, which creates an interesting relief. After this, the material is painted and, without allowing the paint to dry, it is removed.

Preparing the room for tiles

Before starting repairs, it is necessary to clean the room, remove all dust and construction debris, preferably wet cleaning. After which the insulation procedure is carried out.

Next, precise measurements are taken, taking into account all the architectural features of the room. This is done for subsequent calculation of the amount of materials and drawing up an estimate.

Their presence will allow you to save money if there is no balance, or eliminate the need to purchase additional materials.

The easiest way to count the number of square tiles is with the direct installation method. To do this, you need to calculate the surface area, divide it by the area of one tile.

Also take into account the thickness of the grout joint (from 2 to 10 mm) and 10-15% of the material for the breakage.

To calculate the number of rectangular tiles, when using decorative ones, when laying diagonally, it is better to use a construction calculator.

Square tiles are easy to calculate

Tile selection

When choosing a tile, you must first evaluate its quality. You need to select the material according to the following parameters:

the difference in diagonal sizes is less than 1 mm;
the products do not have chips or other damage;
the ribbing on the reverse side is more than 1.5 mm high.

It is important to know the difference between floor and wall tiles:

The floor often bears shock loads from objects falling on it, so during production the enamel coating, like the tile itself, is made thicker.
Floor tiles have a denser structure and are more difficult to cut; you will need a special tile cutter for the job.
To provide slip resistance, the surface of floor tiles is embossed or matte.

When purchasing ceramic tiles, you should take the material with a margin of 7-10%; this amount will be used for trimming.

Features of the material

The symbiosis of traditional clinker tiles and the latest thermal insulation materials made it possible to create facade finishing, which in addition has excellent heat capacity.

The insulation functions are performed by extruded polyurethane foam or its analogue - polystyrene foam with a density of 35 kg/m3. These materials are the best for insulation today. Clinker, in turn, is one of the most durable and resistant facing materials to the negative effects of external factors.

Secrets and tricks during installation

Although the process of installing clinker thermal panels is simple, it is worth knowing some tricks. For example, when screwing panels to walls or sheathing, do not tighten the fasteners all the way. Leave a gap of literally 1 mm. This will be needed so that the building materials have a reserve for shrinkage or expansion during temperature changes. It is also important to hold the screwdriver exactly perpendicular to the hole. Insert the elements of the clinker thermal plate into the groove as tightly as possible.

We are sure that the information presented in this article will be useful to you. Follow the instructions exactly and you will not only be able to efficiently finish the facade with clinker thermal panels, but also wisely invest in your home.

Preparation for installation

Various options for finishing
Often you have to make repairs in an old house, so in this case it is better to remove the old tiles and, after dismantling, adjust the corners of the walls and check them for the degree of curvature.

The building level will help with this. And since the curvature indicators will be disappointing, you need to eliminate the problem with the help of beacons to the level of the plaster.

This is a rather labor-intensive process, but the quality of the entire masonry may depend on its result.

The curvature has been dealt with, now you can prime the wall, thanks to which in the future, when applying the adhesive composition, you will get good adhesion. On plasterboard walls, you can lay tiles on a primer.

The same material (plasterboard) is good for leveling old surfaces instead of using plaster. Next, it is important to competently approach the choice of adhesive composition for tiles.

Pros and cons of cladding

The main and most valuable quality of clinker panels is simple and quick installation. Installation is carried out using the tongue-and-groove fastening technology, which reliably fixes the modules in relation to each other.

Several factors can be considered advantages:

environmental Safety;
frost resistance;
waterproof, protects wooden elements from mold;
high level of thermal insulation;
easy care;
easy repair;
choice of colors and shapes;
low weight does not overload the structure;
do not deteriorate when exposed to sunlight;
the buildings look well maintained.

It also provides reliable protection from extraneous noise and has a long service life.

The disadvantages include the price and mandatory surface preparation before installation.

Do you need a screed?

Before laying, you should check the coating and evaluate how even it is using a level. If there are significant deviations, it is necessary to make a screed before facing.

What alignment methods are there?

Wet screed. Suitable for cases where it is necessary to increase the strength characteristics of the floor. At the same time, a gap is created around the perimeter of the room, taking into account possible deformation. This condition allows the base to move without destroying the installed coating;

Dry screed method. This method is the most popular because it allows you to create not only a flat, but also a reliable floor with high load-bearing capacity;
Leveling with gypsum board sheets is considered the easiest option. First of all, carefully examine the condition of the wood floor. Those bars that have rotted should be replaced with new elements. Next, the drywall is installed, the sheets are fixed with polyurethane glue, and the joints are treated with sealant. You should also soak the sheets with a primer mixture.

What are clinker panels?

Clinker panels are an innovative multilayer material for cladding any external surfaces. The basis of the slabs is made up of high-quality polyurethane foam insulation with a thickness of 2-8 cm. The facing part of the tile itself is fixed to the insulation with glue.

The ceramics that make up the material are highly resistant to moisture and temperature, and firing the tile makes it durable. Thanks to polyurethane foam, clinker panels combine the best qualities of a facing material.

The slabs are made in special shapes, thanks to which they are tightly enclosed in the structure of the canvas.

Technology of tiling a wooden floor

After this, you need to pour a small layer of concrete screed. Today on sale you can find special mixtures designed for wooden surfaces, which are elastic even after hardening and do not crack when the base moves. After drying, the concrete is primed.

Stages of tiling a wooden floor with ceramic tiles

Now you can start tiling the floor. The tiles are laid using standard methods. If this is a kitchen, it is recommended to start installation from the farthest visible corner or from the center of the room. In the latter case, you need to divide the surface into 4 parts from the central point and work on each zone separately. After installation is complete, be sure to seal the seams. To do this, you can use resin-based mixtures or latex mastic.

Features of using tiles in a frame house

Finishing bathrooms and kitchens is the most expensive item of renovation. Wallpaper can be re-pasted, cornices can be re-hanged, but bathrooms and kitchens are built to last for decades.

For this reason, most often they use a wear-resistant material - ceramic tiles.

The procedure for laying tiles in a frame house requires the installation of drywall.

It is also worth using certain types of tile adhesives and compositions that allow the tiles to better adhere to the surface of the walls and keep up with the floor. They must have a high level of plasticity.