Doors made of eco-veneer - reviews of a product made of multilayer plastic

Market Review

In order not to waste a lot of time searching for the right offer and company for the production of interior doors, it is worth deciding on the price category of the products and the type:

• The most expensive models (average cost from 10 to 50 thousand rubles) are made from solid wood (oak, beech, pine). These are solid doors made entirely of wood. They are distinguished by their heavy weight, high strength and long service life.
• Average price category (from 5 to 25 thousand rubles) - veneered. These are products consisting of a wooden frame and filling in the form of honeycomb cardboard or thin slats. They are lined with a thin layer of wood (veneer) glued onto MDF boards. With a low price and light weight, these doors have a presentable appearance that adequately imitates solid wood.
• The cheapest (from 1 thousand rubles) are laminated. They are designed in the same way as veneered ones, but for cladding they use an MDF board covered with melamine or polyvinyl chloride film.

You can purchase interior doors in different ways: in large construction centers, directly from the manufacturer, via the Internet.

The retail chains OBI and Leroy Merlin offer models costing from 1,000 to 10,000 rubles from little-known Russian manufacturers. These are mainly laminated doors of classic and modern designs in common shades. The seller provides a warranty of up to 1 year for this product.

Famous Russian manufacturers supply products through specialized stores of interior doors, which are located in every major city, or their own retail chains. You can also place an order with them directly through the official website. Their prices start from 5,000 rubles. The warranty period is from 1 to 3 years.

The range of online stores is usually varied. They present both economy class and luxury products from various Russian and foreign manufacturers. Therefore, the price range is very large.

European manufacturers on the Russian market are represented by Belarus, Italy, Finland, and Spain. The products of the former are more than affordable, starting from 7,000 rubles per solid wood door. Finnish manufacturers offer doors made of solid pine at prices starting from 10,000 rubles. Spanish and Italian doors are less affordable - the minimum cost of a solid beech product is 20,000 rubles.

Peculiarities

Modern equipment, the use of high-quality materials and advanced technologies allow us to produce doors that are not inferior to the European quality level. Even when exposed to moisture and mechanical stress, the canvas does not deform or crack. Good sound insulation, silent closing and opening of the door is achieved through special rubber seals.

At each stage of production of El Porta interior doors, products undergo quality control. A streamlined production scheme allows us to produce products in a short time and allows our customers to order products according to individual sizes.

The products of the El Porta factory are a guarantee of high quality, unique solutions for projects of any purpose and a pleasant price category.

Rating of interior door companies

Among all the companies producing interior doors, Italian ones have rightfully earned a world name; their manufacturing technology is perfected to the smallest detail. But not everyone can afford their products. A large share of the Russian market still belongs to domestic manufacturers; Belarusian, Finnish and Spanish brands are also popular. Therefore, they are the basis of the rating: the best companies of interior doors.

Companies should be compared according to several criteria:

• The period of warranty service provided by the manufacturer for the product.
• Product quality according to reviews from real customers, the ratio of advantages and disadvantages.
• Variety of assortment, quantity and stylistic direction of released collections.
• The company's pricing policy and the correspondence of cost to the actual quality of products.

The positions of companies in the rating are conditional; in this case, the 10 best companies of interior doors are presented, according to the opinion of Russian consumers.

Volkhovets

Types of interior doors: veneered, solid.

Warranty period: 3 years.

Cost: from 20,000 rubles

All products produced by this manufacturer of interior veneered and solid doors are made only from natural, environmentally friendly raw materials. The range includes classical, neoclassical and modern collections. According to customer reviews, the quality of the products is excellent. Disadvantages include the use of fittings from other manufacturers and a limited range of designs. Since the company deliberately refuses to use plastic and other synthetic treatments, all products have a natural appearance and strict lines, in addition to low resistance to high humidity. You won't find any models with unusual designs.

Sophia

Types of doors: veneered and solid.

Warranty period: 3 years for canvas, 1 year for accessories.

Cost: from 17,000 rubles.

This is a world-famous company producing veneered interior doors and solid wood doors. The factory takes part in many European exhibitions, thanks to this it always keeps up with the times. The design of the products is very diverse, from classic to modern glossy. The company cooperates with famous European designers. There are no negative reviews about the quality of the products. There are official representative offices of the company in many cities. Consumers note the long production and delivery times for custom-made products.

Which company of interior doors is better to choose?

To decide which company to choose good interior doors, you should not only decide on the price category and the method of manufacturing the panels, but also study the quality of the products of a particular manufacturer, and also think about the expected service life of the doors.

Situations and options for choosing an interior door company:

• If the main goal is to save money, then you can give preference to companies that produce inexpensive laminated interior doors, the quality of which will satisfy your needs. This option is suitable for temporary repairs or for installation in openings that are rarely used, as well as in places without strict safety requirements. Recommended brands: ElPorta, Bravo.
• To renovate an apartment on a limited budget, you should choose products in the mid-price category - veneered or with high-quality lamination. Veneer is better for bedrooms and children's rooms, as it is more environmentally friendly. These are manufacturers of interior doors - Verda, Profile Doors, Ocean, Belwooddoors.
• If quality comes first, you should purchase products from companies that have proven themselves in the market. This is Sophia, Volkhovets, STATUS made of high-quality veneer or solid wood.

What is PVC material?

The second name is PVC-polyvinyl chloride. It is obtained by combining chemical elements such as chlorine, hydrogen, carbon. In fact, it is a natural product; it is made from table and rock salt, as well as products left over from oil refining.

In order for the material to be rigid and retain its strength for as long as possible, a plasticizer is added to it.

PVC has many positive properties, among which it is worth highlighting moisture resistance, resistance to ultraviolet radiation and chemicals, harmlessness to others, low cost, and the ability to be recycled after its service life has expired.

el'PORTA

The manufacturer promises European quality at the prices we are accustomed to. The range includes euro veneer, eco veneer, 3d-graf and enamel. Let's figure out what is what. The essence of euro veneer and eco veneer is the same: these are environmentally friendly materials, which in texture repeat the type of natural wood. At the same time, they are protected from the damage that is characteristic of it, but by less “innocent” substances.

Euro veneer. Legno-38 Eco veneer. Porta-50A-6

from 2,812 rub. from RUR 2,812

3d-graf is not called an environmentally friendly material, but it is awarded the epithet “innovative”. Its main advantage is that it is resistant to mechanical damage, but within reasonable limits. And, of course, very inexpensive. A coating similar to enamel - enamel, is a little more expensive. But in addition to dirt and scratches, it will even repel handprints.

3d-graf. Porta-22 Emalit. Porta-62

from RUR 1,764 from RUR 2,983

According to the manufacturer, the average budget for their company’s doors for a 2-3-room apartment is 25-30 thousand. Agree, there is a noticeable difference with Italian brands. And with the money saved, representatives of el'PORTA offer to go to this sunny country.

"Alvero"

The brand, originally from Maykop, is a continuation of Leader LLC and specializes in a different segment. These are doors made of solid oak and beech. The most durable types of wood, but the price, as you might guess, is appropriate. By the way, this is one of the few factories that provides a 5-year guarantee on its products, most others - only a couple of years.

Oak door Elizabeth 4 Beech door Rome

31,000 rub. RUR 33,400

By the way, doors from the premium collection are produced under the VIPORE , which boasts its own production in the foothills of the Caucasus and the largest showroom in Russia.

Fabric manufacturing technology

A veneer door can be produced using different technologies, depending on whether the product is hollow or solid.

They are manufactured according to the following scheme:

1. The frame is assembled from pine bars, which have a moisture content of no higher than 8%. If this indicator is higher, then the material may dry out and deform with the appearance of cracks.
2. One side is covered with MDF sheet (4 mm).
3. The resulting cavity is filled with filler - cellular cardboard or polystyrene foam.
4. The other side is also hemmed with MDF sheet.
5. Veneer is selected according to color and pattern, and it is necessary to achieve its symmetry.
6. Veneer sheets are laid out with a margin of the size of the canvas and placed in a machine in which the blanks are glued to each other using a zigzag adhesive thread.
7. After covering with veneer, the remaining glue is removed from the workpiece, cleaned along the seams and precisely adjusted to size.
8. The veneer is glued to the door.
9. A layer of varnish is applied to the veneered canvas to protect it from environmental influences.

Veneered interior panels can be produced in a solid version. In this case, it is not the frame that is assembled, but the whole canvas. The assembled bars are placed under a hot press and firmly glued into a monolithic panel.

It is also possible to finish a metal door with veneer. MDF panels are attached to the metal with self-tapping screws, and then a decorative coating is applied.

The veneer covering is glued using 3 methods:

• Cold pressing. PVA glue is applied to the front surfaces of the workpieces and placed under a press. Bonding is carried out at a temperature of +30…+35°C. Then the ends are glued. After the glue has completely dried and hardened, the dried residues are removed, then all surfaces are sanded.
• Hot pressing. The coating is glued using formaldehyde-containing adhesives at temperatures above +100°C.
• Membrane-vacuum. A special press allows you to cover not only smooth surfaces, but also embossed ones.

"Bravo"

The company has one of the largest door production facilities in the country. It produces more than 350 models from classic to modern style. In addition, here you will be offered a large selection of materials, both from natural wood and imitating it. There is plenty to choose from among coatings - veneered, PVC, laminated, tinted, painted. By the way, the AQUA DVERI line is also produced here, which is based on a material that combines the properties of plastic and natural wood. These doors are absolutely resistant to moisture. The price of goods starts from 650 rubles and ends in tens of thousands.

Painted door (enamel) Graffiti-1 white Veneer Wood Classic-53 Ivory

from 4,886 rub. from 10,066 rub.

Kinds

There are three types of eco-veneer:

1. Nanoflex is a multilayer coating based on high-strength paper. Strength and water resistance are provided by a special varnish applied on top.
2. CPL laminate is a plastic veneer that is impact resistant but brittle.
3. Polypropylene film is closest in appearance to wood. It is elastic and allows you to paste over the door leaf without joints.

"Sofia"

This factory supplies its products not only throughout Russia, but also abroad - why not guarantee quality? In addition, the company is distinguished by a truly stylish design. If many competitors are stuck in the classic style, adapted in the 90s, then this factory will give a head start to leading European manufacturers in the style of its models. The downside is the long wait for an order (and time to save up for it).

Cedar, cortex 93.94 Opal matte, varnish 74.94 ML

from RUR 29,209 from RUR 32,726

BELWOODDOORS

The company, originally from Belarus, is confidently conquering the market throughout the post-Soviet space. One of the features of the products is concern for noise insulation, which is combined with a laconic design and wear resistance. The popularity of the factory has become so high that they even started making fakes, so it is better to deal only with official dealers. And then there will be no questions about durability.

Solid pine and MDF, enamel. ARVIKA Solid pine with honeycomb filling. PALLADIO

From 5,000 rub. from 6,900 rub.

STATUS

A young production, which, nevertheless, is already considered quite reputable. The company's management decided to focus not only on quality, but also on interaction with customers. If necessary, managers will quickly solve any problem that arises.

Eco-veneer OPTIMA 133 Eco-veneer FAVORITE

From 14,530 rub. (set) From 20,050 rub. (set)

If you have not found the ideal door in the catalogs of manufacturers presented in our rating, pay attention to the following factories:

• VERDA. Doors are manufactured using German equipment. Production is one of the largest in Russia. It is not surprising that they can make a door to any size; in addition, there are different mechanisms to choose from - from standard hinged to compartment and accordion.
• Onyx. represented in more than 100 dealership centers across the country. The peculiarity of the production is that they can make a custom-made door for you: freedom of imagination!
• ProfilDoors. Veneered doors from this manufacturer are especially popular. The brand stands out for its environmentally friendly approach to creating samples and attention to noise insulation issues.
• Vladimir door factory. It would seem a legacy of Soviet times. But no - it’s a completely modern production. By the way, the wood for the doors is prepared directly at the factory, which means they are responsible for its quality inside and out.
• Ocean. The factory is famous for its unusual designs of painted glass. A variety of images are applied to the drawings: fairy-tale characters, ships, and exotic flowers. Classic and modern models are also presented here.

Review of the best interior doors from popular manufacturers. Rating of collections made from solid wood, natural veneer and artificial coverings.

Products of Porta Prima

Regardless of where Porta Prima interior doors will be installed: in an apartment, private or country house, they can not only make the interior stylish, but also inviting, photos of our clients prove this.

Doors made of high-quality veneer and natural wood will delight even the most capricious home interior designer. In the photo you can choose not only the color, but also high-quality fittings that will match your interior.

The color palette is very large, you can look at the photos on our website and choose the following shades:

• wenge;
• nut;
• dark walnut;
• Milanese nut;
• white ash;
• bleached oak;
• black ash enamel;
• bog oak;
• gray oak

It combines the quality of natural materials, stylish and modern fittings and a price that will please even the most economical consumer.

Door collection

Porta Prima products are represented in several collections, each of which has its own characteristics.

By creating comfort and harmony in your home, you create it together with Porta Prima.

Which interior doors are best to buy?

When choosing a door, first of all, pay attention to the material of manufacture and the coating of the door leaf. The applicability, appearance and durability of the product depend on this.

Door leaves can be made from solid wood, MDF or chipboard panels, LVL timber, glass, cellular cardboard and other materials.

Natural veneer, artificial eco-veneer, PVC film, enamel, lamination and other materials are used as the finishing coating for doors. Each type has its own advantages and disadvantages, which will be discussed below.

The second important criterion is the type of door opening.

There are several options here:

• Swing – standard doors;
• Sliding compartment doors are especially convenient for wide openings;
• Folding, also known as “books” and “accordions” - fold inside the doorway;
• Pivot or rotary (rotor doors) - optimal for rooms where it is not possible to install a swing door;
• Pencil doors - the canvas slides inside the wall, ideal for narrow openings;
• Hidden doors and other unusual designs.

Manufacturers often offer different installation options for the same canvases.

In rooms such as bedrooms and bathrooms, blind door panels are installed. For living rooms and kitchens, doors with glazing are suitable, allowing natural light to enter.

Installation in a doorway

As can be seen from the recommendations, the question of how to install an accordion door yourself will not be difficult even for an inexperienced craftsman.

Choose the right material for sliding doors, fittings for them, take into account all the features of these structures, and they will serve you well.

How to install an interior door

Required measurements

• 1. Treat the door block with a primer, after sanding it with sandpaper.
• 2.Before installation, try on the door in the doorway to check its dimensions and opening direction.

Right angles are not observed

• 3.Check the horizontal and vertical position of the door using a level.
• 4. After measuring the diagonals, make sure that right angles are maintained.

Installing a door in an existing wall

For all types of installation

• 4.Install the door block in the opening and secure it with wooden wedges. 5.Check the horizontal and vertical level, gaps and right angles of the door block.
• 6.Fix the door block using plaster, mounting adhesive or mounting foam.

If you are using spray foam, wait 30 minutes before removing excess foam. After 45 minutes, the hardened foam can be sanded and puttied.

Installing a door during the construction of an interior partition

• 1.Draw lines on the floor to indicate the exact location of the door.
• 2.Install the door block and secure it in place, having first checked the horizontal and vertical levels.
• 3. In order to fix the door block in a vertical position, insert between its upper edge and the ceiling a cross made of two wooden wedges connected to each other in the center with thick rubber (for example, from a car inner tube).

Installation of a door block in a partition made of gypsum blocks or cellular concrete blocks

• 1. Secure the bottom edges of the door frame with plaster or corners.
• 2. Cut the plaster blocks so that they fill the entire space around the door frame. Secure the blocks to the top crossbar of the door frame using mounting adhesive.

Installing a door block in a partition with a wooden or metal frame

1. Insert the vertical parts of the frame into the grooves of the door frame.

2. Screw the door frame from the inside to the frame.

3. Cover the frame with sheets of plasterboard.

Final finishing

After the door is installed, you can use embossed or flat trim for decorative finishing.

Paint the door with paint, varnish or tinting wax. After applying the first coat of paint, it is recommended to lightly sand the surface.

If the doors will be glazed, install the glass before applying the final coat of paint.

Do-it-yourself installation of plastic doors

Not every owner can install plastic doors with his own hands without errors. To avoid mistakes, it is advisable to call a measurer at least once, in a conversation with whom you can learn about the key features of this work, which can determine the final result of self-installation.

However, it is not enough to know all the nuances of door installation work.

In addition, the owner will have to figure out what tools and materials he should have available.

If he planned to install an entrance door, then the structure should be equipped with elements such as reinforced fittings, mortise locks, etc. If he installs a door in the room and on the balcony, he will not have to buy too many additional accessories, which will help save money.