attaching toilet paper holder to wall

The comfort and quality of our life are ensured, among other things, by many familiar little things. These also include such a mandatory attribute of toilets or bathrooms combined with a bathroom as a toilet paper holder. They come in two types: wall-mounted and floor-mounted.

The first have several varieties:

Closed type holders
, in which a special container with a lid is provided for a roll of paper, or at least the roll placed on the hook of the holder is covered on top with a lid that protects it from the settling of dust or moisture particles, if the device is installed in a combined bathroom. The paper in such holders is completely or partially covered; you can unwind the required amount by pulling the protruding end of the tape.
Open holders
are the simplest devices - hooks or mini-bars on which a paper roll is mounted. This is better than nothing: the paper is always in the right place, at hand. But such simple and cheap holders are gradually being replaced by more functional and aesthetically pleasing devices.
The holders are built-in
- they are not mounted on the surface of the walls, but are placed in a niche specially provided for this purpose. Such a niche is provided for in the design project and equipped while carrying out repair work, accurately calculating the dimensions for the specific holder planned for installation. A container with a roll of paper is built into such a niche; only the tip of the tape protrudes from the wall. When the paper holder runs out, the container hidden behind the decorative trim is pulled out from the wall and a new roll is placed in it.
Wall holders-racks
of horizontal or vertical design. Vertical racks are most in demand - they are more compact, which is very important, because often the room of a toilet or combined bathroom in city apartments is not very spacious and you have to look for optimal solutions for the rational use of space. But horizontal racks with a spectacular design have also gained popularity among Russian consumers due to their versatility and versatility of use. Such racks have different designs; some models have a special basket for storing spare rolls, a stand for a sanitary brush, a shelf where you can place detergents and other small items.
Mobile holders
mounted on walls using quick-release fasteners. Among such devices you can find closed-type models, but for the most part they are still open holders of a simple design, as light as possible so that the quick-release fasteners can withstand the load. An example of such holders are models with suction cups, which are easily attached to a flat, smooth surface and can be quickly moved to a new location. The disadvantage of holders of this type is the unreliability of fasteners. The suction cups often come off, unable to withstand the load, and the paper ends up on the floor. And the appearance of such holders is not very presentable.

Happy owners of spacious bathrooms and bathrooms combined with them can use floor-mounted toilet paper holders. Their use is especially important in cases where, for one reason or another, it is impossible to hang the holder on the wall. The floor-standing version of such a device can be installed in any chosen place, and toilet paper will always be at hand.

Closed paper holder PORTOFINO, antique brass

Floor holders come in standard and multifunctional types. In the first case, they are a rack with a threaded roll of paper. But few people prefer this option due to the fact that the stand takes up a lot of space, performing one single function. It is rarely used, since even a very beautiful stand topped with paper looks awkward and takes up too much space. It is much more rational to install a multifunctional floor stand in a combined bathroom, which has a container for spare rolls of paper, shelves for placing household chemicals and sanitary equipment. Such a floor holder can replace several shelves that clutter the surface of the walls. The floor stand is not fixed to the floor, so it is easy to move and clean.

Toilet paper holders: types, features, installation methods

The first have several varieties:

Creative solutions when choosing and manufacturing paper holders

Oddly enough, even an ordinary holder in the bathroom can become an original piece of furniture that attracts attention - you just need to use a little imagination. In fact, it is these little things, chosen or made independently, that become the highlight, turning a standard renovation into an original design solution, so you can safely let go of your imagination and not be afraid to experiment.

Plastic toilet paper holder

There are a huge number of options: the paper can be held by an athlete lifting a barbell with rolls strung on it, or maybe the roll will end up in the hands of a beautiful lady? Interesting and unusual solutions can be viewed on our website.

What are toilet paper holders made of?

Since rooms such as a bathroom or toilet are characterized by high humidity, the material used to make toilet paper holders must be moisture resistant. Therefore, such devices are made mainly from plastic and metals. These materials, like any other, have both pros and cons.

Plastic holders

Plastic models are cheaper than metal ones and belong to the economy class. They are light in weight, easy to care for, easy to clean, and come in a wide range of colors. The disadvantages of plastic holders are their fragility and fragility, instability to fading, rapid loss of color and original visual appeal. From plastic holders, it is better to choose open or closed wall models. You can also purchase a built-in plastic holder; we do not recommend buying plastic stands.

Metal holders

Metal models have an impressive design, look presentable and are much more expensive than plastic ones. They are strong and durable; under normal operating conditions they will last for decades. Such holders can be simply polished, painted, chrome-plated, etc. The variety of surface treatment options provides wide possibilities for designing bathrooms in different style concepts. The disadvantage of painted metal holders is the fragility of the decorative coating. If you need a reliable device that will not lose its original appearance over decades, it is better to purchase ordinary polished holders made of stainless steel.

Choosing the right product

We proceed from the size and design of the room, as well as whether you want to drill holes in the wall or do even more labor-intensive work.

In particular, the most compact models - built-in - involve making a niche in the wall. And hanging holders (except those with Velcro) need to be secured with self-tapping screws or self-tapping screws. However, for a small bathroom combined with a toilet, these two options will be optimal.
But if there is plenty of space, you can think about a floor stand, which can often accommodate not one, but several paper rolls at once, which is very convenient.
It’s also good if the stand has additional functions. For example, there is space for a toilet brush, newspaper rack, and other accessories. By the way, wall products are also multifunctional. More on this in a little further.

In any case, you should try to purchase a product from a reliable manufacturer, especially if it is made of plastic, which should not be too fragile (otherwise it will quickly break). Although you need to look carefully at the quality of the metal. It is optimal if it is stainless steel or brass.

And one more thing: if the room is not particularly humid (for example, it is a separate toilet), then you can choose the simplest open model. For example, like a curved hook hanging from a wall. But where moisture may get on the paper, it is worth taking a closer look at closed-type holders - in the form of a box or at least protected by a top lid.

The following video will introduce you to examples of interesting and non-trivial toilet paper holders:

Choosing a toilet paper holder

To choose a quality device, you should not only pay attention to the appearance of the device, but also take into account its other operational properties and characteristics, and do not forget about the features of your bathroom. The most important selection criterion is the material of manufacture. If you intend to use the holder for a long time, you should prefer a metal model. The plastic holder will look decent for a couple of years. Poor quality metal connections are unreliable and the coloring is uneven. The decorative coating should not be afraid of moisture - this point must be clarified in the instructions for the product or from the seller.

The shape and color of the holder must be in harmony with the design style and color scheme of the bathroom, combined with other elements of the room’s decoration: shelves, glasses for brushes, a soap dish, etc. Only if these conditions are met, the created interior will look complete and well thought out.

How to properly place the holder in the bathroom

All elements of the bathroom must be placed and installed in accordance with ergonomic requirements. According to experts, for comfortable use of the toilet between it and the walls, both on the right and on the left, the distance should not be less than 35-45 cm. The paper holder is mounted at a level of 60-70 cm from the floor surface, slightly (20-30 cm) by moving it forward. As a standard, the holder is mounted on the right side of the person sitting on the toilet. For most of us, this solution provides maximum comfort.

If you and your household are right-handed, then it is more convenient to place the toilet paper device on the right. For left-handers, this should be the left-handed solution, but for ambidexters, any placement of the holder will be equally suitable.

There is a lot of controversy about which side to put on toilet paper - should the edge of the tape be on top or bottom. Even scientists thought about it. They are inclined to the first option - top placement. Their arguments in favor of this method are as follows:

The last significant argument in favor of the option of placing the edge of the roll in the holder at the top is that this method is indicated as the only correct one in the patent of 1891, which enshrines the invention of toilet paper.

How to mount a toilet paper holder on the wall

Floor racks for toilet paper are not fixed, built-in models are inserted into niches, and wall-mounted options require reliable installation. Its diagram is usually indicated in the instructions and varies depending on the design nuances of each model. The manufacturer also supplies the device with fasteners - the required number of brackets, dowels, and screws.

Before you begin installing the holder, carefully consider the location of its attachment, taking into account the recommendations given above. After this, you need to mark the places for drilling holes for the dowels, select a drill corresponding to their diameter and make sockets with a depth of the length of the dowel. Dowels are carefully driven into these holes. If the nest is too wide, it needs to be compacted. You can simply wrap the dowel with newsprint. After that, screws are screwed into it, attaching a bracket-bracket to them, onto which the toilet paper holder is mounted. Using a screwdriver, the device is fixed to the bracket by screwing in a screw specially designed for this purpose. After this, the holder is ready for use. There are holder designs in the form of an open rod on two brackets. For them, all this will have to be done twice.

If you need to install a regular holder on the same bracket with a metal plate cover, but you don’t know how to drill tiles or don’t want to because you just renovated the bathroom, you can try an alternative installation method - attaching the holder to mounting adhesive. This method is good because even if you make a mistake with the installation location, everything can be corrected at any time. So, in the area where you will attach the holder, thoroughly clean and degrease the tiles. Squeeze a little assembly glue onto the bracket-bracket from the tube using a special gun, distribute it over the entire surface of the bracket and press it against the wall in the intended location. After this, you need to wait until the glue dries thoroughly: leave it overnight or even for a day. After the bracket is glued to the tile, you need to place the holder on it in the same way as with traditional installation and fix it by tightening a small special screw from below. If the glue has dried well, it will hold the device on the wall quite firmly.

Types of paper holders

Open vs closed

Open devices usually come in the form of a pin, hook, or mini-bar.

The bar is equipped with a plug on one or both edges, which prevents the roll from falling.

There are more intricate options.

The simplicity of the open design makes it cheap. But devices without a cover are not very convenient. More precisely, they are not suitable for combined bathrooms and public toilets. Such models are gradually being replaced by more functional and aesthetic analogues.

The roll can be covered completely or partially. This option allows you to protect toilet paper from dust, dirt, moisture and splashes , contact with dirty hands. It also makes it easier to feed material and control its consumption. Only the roll must be inserted with the correct side, otherwise the cover will not perform its function (hold the tape).

A type of holder closed on all sides a dispenser. It is a roll storage container with a movable lid. Only the tip of the tape remains outside, by pulling which you can unwind the required amount of material. The serrated edge of the dispenser row opening makes the tearing process easier.

For roll without core

If you use paper without a core, you can buy a special dispenser to store it (the characteristics indicate the diameter of the roll opening - 0 mm) or sew a bag with your own hands from fabric. Another solution for such a roll is a hanging basket:

Type of allocation

Floor and wall models are available for sale. In the first case, the roll is fixed on a vertical or horizontal stand. Floor-standing models are usually made multifunctional.

The main advantage of the stand is its ability to move freely. Many models can accommodate two or more rolls. The floor structure can be cleaned in the dishwasher. The disadvantage of stands is that they take up quite a lot of space .

A wall holder is the most common paper storage option today.

This type can be attached to a vertical surface or recessed into it. This model can be mounted on the wall in any convenient place. The method of fastening this element may be different.

How to choose and make?

You can make your own paper holders from several types of materials. You need to choose them in accordance with your own wishes, capabilities and needs, and sometimes based on the availability of certain materials at hand. Let's consider possible options for choosing material, for example, butt.

From fabric

Fabric is one of the most suitable and successful materials from which it is easiest to make a toilet paper holder. You can simply take the material, twist it into a rope and attach it to the wall. But there are also less simple, more unusual options. One of the options for making a fabric holder is a device in the form of a doll.

Having created a holder doll with your own hands, you can use it in different ways. For example, you can give a holder doll in a set, for example, with a set of towels. Or you can put it in your bathroom and delight yourself and your loved ones with a pleasant sight.

It should be noted that to make the doll you will need a large piece of fabric on the body, as well as small scraps from which you can sew clothes. In addition, you will need accessories: buttons and threads, plastic eyes, and other small elements for decoration.

To begin with, draw patterns on paper material. With their help they will then make parts of the torso and head. In this case, actual dimensions must be used. An allowance of about 0.5 cm should be left for the seams. After this, the patterns need to be transferred from paper to fabric material. In this case, it is better to iron the material. Fabric patterns are cut out. Afterwards you can sew the doll.

First the body is sewn together, then the head, arms and legs. At the same time, you need to remember that you need to leave a small hole for later filling. You can fill the doll using padding polyester or heavier materials, such as pebbles. After this, the arms, legs and head are attached to the body. For stability, you can insert wire into the arms and legs. This way the paper will hold up better.

This doll will be ready.

Wood

Wooden devices will be a stylish and neat accessory. You will need to use materials and tools in the form of planks, sandpaper, hacksaws and glue. First, prepare the side parts. After which you can do the crossbars. In this case, each board must be processed using sandpaper. The final stage will be connecting the parts together. Glue is used for this. After it dries, the wooden holder can be used.

It should be noted that you can use some kind of fasteners rather than glue. However, this will significantly make the structure heavier.

From foamiran

The doll, as one of the original holder options, can be made from foamiran. You can better understand the technique of making a product with the help of a master class.

Foamiran is a decorative material that resembles suede fabric in feel and appearance. It is also called foam rubber, foam EVA or revelur. The manufacturer sends the material to the market in thin sheets - about one millimeter thick. At the same time, the material has the properties of elasticity and the ability to take the necessary shapes. To start working with foamiran, you will first have to warm it up. You can use an iron or a heat gun for heating.

The variety of material properties provides the widest choice of possible variations in external design. For example, you can make a toilet paper holder in the shape of a pig doll.

Before starting work on the pig, you will need to carry out a preparatory stage, during which individual parts for the future doll will be created. So, you need to cut out a shape from which the muzzle and head of the pig doll will then be created. After this, you need to take foam plastic and cut out a number of blanks from it - balls, which will become the basis for creating the head and legs, as well as cone-shaped foam for the body. In this case, you should remember the proportions. You can make them “correct” or more comical. When choosing, rely on your own wishes and needs.

After this, you need to prepare foamiran, which will be used to create legs, head, neck and clothes. You can also use other fabric, threads and ribbons, for example, for a hat, slippers and robe. For those whose flights of fancy cannot be stopped, acrylic paint, an iron, glue or a hot gun may also come in handy. In a word, everything that will serve as an auxiliary tool for creativity is appropriate here.
After all the preparation described above, you can start working on foamiran. First you need to warm it up and smooth it with an iron. In this case, you need to remember about the appropriate color of the material - for example, for the muzzle you will need a flesh color. After preparation, the material must be pulled over the previously prepared foam face. In this case, you need to ensure that the foamiran fits tightly to the workpieces, especially in thin elements and small parts. After the material has cooled, you need to trim off the excess and glue all the protruding edges.
Using paints, eyes, mouth, nose, eyebrows, eyelashes are applied to the face - whatever you want to draw there. After preparing the muzzle, you can proceed to the body and legs. The final stage will be the handles, which will serve as a holder for toilet paper.

The end result will be a funny pig doll that you can put in your bathroom or give to someone close to you. Children will especially enjoy this useful and decorative item.

Cool toilet paper holder made from toys

Let's say, for example, that you have a whole collection of funny figurines or toys at home. Perhaps your child (even if he is already over 40) collects them. From time to time, you throw out particularly old items or dump them in a corner where they collect dust. So here it is. Better yet, make your own toilet paper holder out of them!

DIY toilet paper holders made from old parts

Or you have accumulated parts from furniture, electrical appliances, a car, etc. at home. Look, maybe there is something there that would be ideal as a toilet paper holder? Most often, the part just needs to be slightly adjusted, painted and mounted on the wall. In the following photos you will see simple designs that nevertheless look very nice and unusual.

Themed toilet paper holders

Let's move on to projects that may require more practical skills and investments than those already discussed, but will definitely indicate the hobby of the owner of the house. Is your friend interested in sports and, in particular, skateboarding? This is a great excuse to give him a themed toilet paper holder. Take an old skateboard and repurpose the wheels into a holder. Your friend will be delighted!

Here's another idea. Do you love fantasy, are you a fan of Terry Pratchett and know everything about Discworld? However, it could be any author. A fantasy-style toilet paper holder with witchcraft boots will charm even people who are far from this topic.

Metal Floor Toilet Paper Holders

And finally we left holders, which, of course, can hardly be made by hand, unless you have a blacksmith's skill, but which are practical, beautiful and will add personality to your bathroom.

Doll toilet paper holder

These original ladies will surprise the visiting guests, waiting for them in a secluded place. Those who come will certainly want the same holder for themselves. You can sew it with your own hands to give to those who wish for a birthday or other holiday. When you get the hang of it, if you want, you will sew textile dolls of this type to sell them. This is a good source of income, since at the Crafts Fair such a handmade toilet paper holder doll costs more than 2,000 rubles.

We hope that these arguments have convinced you to take up interesting creativity right now. For it, you can use pieces of fabric left over from sewing some product.

So take:

flesh-colored stretch fabric;
soft filler;
wire;
fabric for doll clothes;
a piece of cardboard;
pattern paper;
pencil;
scissors;
embroidery threads;
hair yarn;
igloo

First you will cut out and sew the body parts for the doll. Then cut out her robe, slippers, scarf, and create these clothing items. After this, you can decorate the vestments, the doll itself, and at this stage or earlier, embroider facial features.

So let's get started. To make it easier for you to understand the foreign pattern, we will do everything step by step.

This is the body that makes up the toilet paper holder doll. Cut out two such pieces from stretch fabric. As you understand, the subtle part is the neck. Place the front and back of the body right sides together, machine stitch along the edge or hand sew. On the right side you see two small stops labeled abertura. It indicates that there is no need to sew up this piece of fabric in this place, since through it you will stuff the doll with filler.
The next pattern is the head and shawl collar of the robe. We create the head from two parts of flesh-colored stretch fabric. The collar of the robe on the pattern is given with a fold. Place this piece on the fabric folded in half. Align the places of their folds, cut out with seam allowances, put this part aside for now.
Fill the sewn head through the remaining hole, the boundaries of which are also marked on the pattern.
By the way, using this technology you can sew a towel holder, then one doll will be responsible for the towel, and the other for the toilet paper.
But these two young ladies cannot do without arms and legs, so the following pattern will help to cut them out with perfect precision. You will need to print or re-draw the image, cut out the pattern, lay it on the fabric, cut it with seam allowances.
It's time to sew clothes for the doll, let's create her robe. Here is the front, which is called the shelf of the product.
The next detail is the back. We make it one-piece. Place it on the fabric folded in half, outline the presented pattern, cut it out with a seam allowance of 7 mm on all sides, and 1 cm at the hem.
When you unroll the resulting fabric piece, it will be one-piece. But you should have two shelves. All that remains is to cut out the details of the slippers and scarf of the beautiful doll. This is all included in the next pattern.
On the bottom left is the sole, and above it is the upper part of the slippers, on the right is half of the girl’s scarf. As you guessed, you will need to cut a stylish headdress out of the fabric by folding the material before cutting it in half.
So, you have already sewn the head and body, fill them with filler. In the narrow part of the head you have a hole through which you inserted holofiber or padding polyester. Thread the neck of the body into this cutout and connect these parts with an invisible seam.
Stuff the limbs with filler, sew up the cut areas, and stitch these parts into place to the body.
To sew slippers, attach the sole pattern to the cardboard and cut it out without allowances. For each sneaker you need two pieces of fabric, which are cut with seam allowances. Using the same technology, use two rag and one cardboard pieces to create toe caps for flip-flops.
Place the elements of the sole in the following sequence: first, on the front side is the first piece of fabric, on top of it is cardboard, and on top of it, face up, is the second piece of linen. Sew the fabric along the edges of the arms using an invisible seam. Sew the toe of the shoe in the same way. Then stitch it on your hands to the sole. You can decorate slippers with fabric flowers.
Let's take care of the doll's outerwear. To sew a robe, sew the sides of the front and back, and close the shoulder seams.
Take two parts of the collar and sew the outer part of it on the wrong side. Iron the inner edges and sew them to the neck of the back and shelves. Fold in the center edges of both front panels and hem them. Make a belt for your robe. Sew a headdress for our doll according to the pattern, which will hold toilet paper or a towel. Embroider her facial features with threads and make her bangs out of yarn.

This or a similar textile doll is what you will get. You can make eyes from beads and put a cap on her head.

There are other options for making this item for the home.

Paper holders made from sanitary materials

Plumbing tubing and fittings are an excellent material for creating a shock-resistant paper holder. Both metal and plastic are suitable for work. Paper holders of various shapes can be assembled from metal products, both floor-mounted and wall-mounted models. Draw a diagram of the desired design on a piece of paper and ask a professional plumber to assemble it. All you have to do is wash, paint and replace the accessory.

You can also make your own garden holder from plastic water pipes. To do this, you need to prepare two round metal brackets, 300 mm tubes with a diameter of 20 mm and several corners of the same size. First, you will need to cut one pipe with a length of 100 mm and two with a size of 70 mm. Then you need to assemble the letter “P” from the corners and tubes using a soldering iron or use glue.

Important! One of the corners should not be glued to the roll pipe, and the other to the support tube. This will allow you to disassemble the product in the future to replace the paper.

Then you need to fix the plastic pipes in metal brackets using special screws, and then the brackets themselves - to the wall using screws. The work is finished, this is how the holder is simply made.

Mounting wall models

With floor holders everything is simple - they are placed on the floor. But the models differ in the type of fastening.

Self-adhesive holder

The area adjacent to the wall is covered with glue. Option for smooth surfaces. Provides relatively weak joint strength. Not suitable for bathrooms with high traffic due to unreliable fastening on some models. The fixing properties of the adhesive may be weakened by moisture and steam. Therefore, the strength of the connecting material of Velcro models is of great importance.

On vacuum suction cups

Option for perfectly smooth walls ; rough mounting surfaces require the use of fasteners.

Also unsuitable for frequently visited bathrooms. It may not withstand heavy loads - the weight of the roll or the pressure when unwinding it. Most often these are open and maximally lightweight structures. Suction cups allow you to quickly remove the product to rehang it or clean it from dirt.

Screw-on

The structure is held stably using screws/screws and dowels. Very reliable mounting option. Installing such devices takes a lot of time and effort. Traces remain after removal. If you don't plan to remove or move the holder, the drilled holes shouldn't be a problem.

There are models that can rotate 360 degrees:

Built-in (recessed)

It is placed in the niche provided for by the design project, which is equipped at the stage of repair work.

In this case, it is necessary to accurately calculate the dimensions, coordinating them with the pre-selected holder. The container with the roll is placed in a niche; only the edge of the tape remains visible from the outside. The paper passes through a hole made in the decorative trim. When the roll runs out, the hidden box is pulled out and refilled. This model saves almost 100% of usable space. Ideal for small toilets.

For spare rolls

Toilet paper gets used up quickly. Therefore, its supply will never be superfluous on the farm. A special type of holder was created to store several rolls. It is placed next to the toilet so that the paper is always within reach. Such accessories have different designs and differ in installation location (floor or wall) .

Floor storage units are in great demand. The rolls can be strung one on top of the other on a vertical chrome-plated steel pin.

They can also be placed in aluminum bins.

A popular option is a fully enclosed cylindrical container with a lid. It protects the paper from contamination and dampness. This is an aesthetic solution for those who do not want to keep the rolls in sight.

Floor baskets look original.

In the bathroom you can install a compact metal stand for several rolls in the shape of a sheep. This spacious design also serves as interior decoration.

a suspended storage device on sale :

Moreover, it can be used at the same time as a regular holder.

Material of manufacture

This criterion determines the strength and appearance of the product.

Plastic

The cheapest holders are made from plastic and come in a wide range of colors.

They weigh little and are easy to clean . The material is resistant to moisture, which is a big plus. Its mechanical strength depends on the quality of the plastic , and its visual characteristics are also mediocre. Often, plastic models are fragile and subject to rapid wear. It is not recommended to purchase plastic stands. It is better to buy wall-mounted or built-in models.

Tree

The wooden holder has a much more presentable appearance.

Fits well into a modern or eco-style interior.

Most types of wood are afraid of changes in humidity and temperature. Therefore, the raw material must have sufficient water-repellent properties. If it is too soft, the structure will soon rot. Preference should be given to products made from oak, larch and ash . Bamboo would also be a good option , which will bring an exotic atmosphere to the interior. Wood looks beautiful and creates a cozy atmosphere. But this is imported wood. For this reason, it is used less often than other materials.

Metal

In terms of durability , the best solution would be a metal holder.

It can be made from:

All of these materials are the best options because they are not subject to corrosion . A chrome or galvanized accessory looks presentable. The strict and laconic appearance of such a holder will fit perfectly into the modern interior design of the bathroom.

The only point you should pay attention to when purchasing a metal dispenser made from other metals and their alloys is the quality of the anti-corrosion coating . If such processing was not performed properly and the metal itself is susceptible to corrosion, the surface of the product will soon become covered with rust.

In prestigious public restrooms, stainless steel dispensers . Such accessories are durable and solid in appearance. They can have a matte or polished surface.

Accessories for luxury toilets are made of precious metals and even encrusted with diamonds.

Forged metal is also used to make holders. It is used to create reliable structures with fancy patterns:

This metal is characterized by increased wear resistance and impact resistance. The wide popularity of such accessories is hampered by their disadvantages: the products are expensive, heavy and bulky.

Aluminum , compared to wood and forging, has a slightly lower cost. Superior to plastic in terms of strength, but the price is usually much higher. Such products have a rather interesting appearance, but their color range is somewhat limited:

Antique dispensers are usually made of bronze, ceramics, porcelain, and wood.

Antique bronze dispenser.

Material used in the production of products

Bronze holder

Paper holders are made from different materials. These are metal, plastic, wood. They come with silver, gold, and gilding coating. Each type has its own advantages and disadvantages.

Bronze

The toilet paper holder, made of bronze, has increased resistance to mechanical stress. There are many design options for such models. Available in the form of boxes, animals or elongated structures, covered with sparkles or gloss. Matte finishes are also used. Suitable for decorating a room with an antique effect. The cost ranges from 1 to 7 thousand rubles.

Metal/Chrome

Metal products are characterized by increased strength and resistance to mechanical stress. They are difficult to scratch or break.

Design options can be silver, gold or simply matte. Made from brass or chrome. Therefore, the products shine and sparkle.

Metal paper holders are susceptible to corrosion due to high levels of humidity in the room. However, some models are coated with a special compound that prevents the destruction of the structure.

Holders can be floor-mounted or wall-mounted, with Velcro or suction cups, closed or open, and in various configurations. Equipped with additional options - ashtray, space for a brush, lighting, built-in air freshener.

Metal products are much more expensive than plastic ones, as they have additional devices and are characterized by increased wear resistance.

Wood

Wooden toilet paper holders come in different colors and configurations. Some models are painted antique or in the shape of animals, such as fish or bear. Often there are products with carved ornaments or designs.

Different colors are used for decoration, almost all the colors of the rainbow. The downside is the fragility and gradual destruction due to high humidity in the toilet. Wooden devices are coated with a special compound that protects the product from rapid destruction.

The holders are relatively lightweight in contrast to metal structures.

Plastic

Plastic paper holder

Often plastic holders are equipped with a lid and stops. Among the colors, white, beige or milky shades are considered popular. However, the color scheme can be varied and is selected according to the design of the room.

The products are easy to use and light in weight.

The disadvantages include:

instability to mechanical damage - often breaks under force;
fragility.

Among the advantages are the relatively low price, variety of colors and designs.

Forged

Forged metal is characterized by increased wear resistance, strength, and does not deteriorate under strong impacts. The shapes and ornaments of such holders vary. Products are decorated with patterns and carved abstractions.

The designs are reliable and suitable for any modern interior. The metal has increased strength, so it is practically resistant to moisture and corrosion. Withstands temperature changes.

The disadvantages include the high price and weight: the structures are bulky and heavy.

Size and other criteria

The holders vary in size . Manufacturers produce dispensers for standard and extended rolls (Jumbo). The latter are designed for the following sizes:

Based on the number of rolls used, the following types of holders are distinguished:

The configuration can be round or square. The rectangular shape is classic.

Depending on the type of cutting toilet paper, dispensers are divided into 2 categories:

Types of structures

Paper holders for the toilet come in a closed type, with a lid, shelves, a brush and even a built-in ashtray. They differ from each other in design, cost, and practicality.

Types of structures depending on configuration:

With a shelf. They are mounted on the wall using long iron pins. There is a small shelf on top, which is equipped with special sides. You can place not too bulky items on it: air freshener, telephone, wet wipes. The advantages include convenience, practicality, and number of models. The disadvantages include the inability of the product to withstand heavy loads; the shelves may break due to frequent exposure.
Closed. It looks like a compact box containing a roll of toilet paper. A small piece of the roll sticks out from under the lid. To tear off a little paper, you need to pull on the protruding end. They come in a cylindrical shape, in the shape of a shell or an animal. To change toilet paper, you need to remove the lid. One of the disadvantages is the impracticality when changing the roll. The advantage is hygiene during use, since the lid protects against accidental entry of dust, debris or dirt.
Holder for paper and brush. Attached to the floor. Performs 2 functions at once: for storing paper and a brush. For paper, the product is equipped with a special box on top, and for a brush, there is an oval base at the bottom. This option is compact, does not take up much space, and has a low price. The structure is stable and does not fall. Suitable for any premises.

There are other additional devices that make the use of holders practical and convenient. Much depends on the specific brand or manufacturer of the product.

Color and style

A wide variety of colors and styles makes it easy to find a holder that matches the decor of the bathroom. You can choose chrome, transparent, black, white or any other color option, plain or variegated, matte or shiny surface.

The most common colors are white, black and shades of various metals.

Wooden models can be painted antique or covered with carved patterns.

Plastic analogues have the greatest variety of colors.

Manufacturers offer models designed in a certain style: retro, loft, ecological, rustic, etc.

Typical loft style.

Connoisseurs of minimalism will love the simple vertical pins attached to the wall.

Chrome plated holders are ideal for modern style toilets. Such models find universal application - apartments, commercial premises, shopping centers.

Many consumers are looking to buy a cool holder that, in addition to performing basic functions, will lift their spirits.

The design of some toilet paper holders may seem too original.

The design is selected taking into account individual preferences, stylistic and color design of the bathroom. Only in this case can you create a complete and thoughtful interior.

The “Knight” figure holder is a good idea for a gift or souvenir.

The creative accessory “Cat” will appeal to lovers of these cute pets.

Style and design

A charming paper holder made by yourself is often called a device. One of the excellent design solutions is to use textiles. The device can also be tied into a case. This item will look stylish. In this case, it is advisable to take into account the general style of the room so that the holder fits well into the interior.

The toilet paper holder can be made to look like a basket. In this case, it will be possible to store more than one roll at once. This stylish solution will, of course, please those who like to save space in their home.

The holder can also be made of wood. Making such models is not difficult, you just need to have the material on hand, a couple of tools and decide on the external design. And you can come up with an endless variety of design variations for wooden paper holders.

The accessory can be made in a nautical vintage style. This option is suitable for families with children or simply for sea lovers. Thanks to such a holder, a very special atmosphere will be created in the room. This style is suitable for combined bathrooms.

You can create a spicy version with your own hands that will appeal to both owners and guests. The most original and famous example is the holder in the form of a strongman, which is capable of holding two rolls instead of one. Men will especially like this model.

An original option would be an accessory in the form of a knight, which you can also create with your own hands. This will be a great opportunity to express your attitude towards the Middle Ages. Fans of the fantasy genre should pay attention to the toilet paper holder in the form of a fire-breathing dragon or in the form of a ferocious gargoyle.

A spectacular choice is the shabby chic style. This is a rather elegant option that will also suit lovers of the classics. The cloud holder is a shape characteristic of a minimalist style. This is due to the fact that this variation combines simplicity, beauty and style. An undoubted advantage of the holder model will be practicality. Children and those who like to fill space in the most rational way will like it.

The next variation is the most suitable for lovers of eccentricity. These are the most original and unusual options, which will not be understandable to everyone and will not be acceptable to everyone.

Industrial or rustic style

Even such a seemingly inconspicuous thing as a toilet paper holder can become the center of the entire room and determine its appearance, and you will see this now. Both of the following examples are made from things that, if you don't have them at home, can easily be purchased at a hardware store for very little money.

Special Requirements

When choosing an accessory, several factors should be taken into account . Such as: the passage of the toilet, its type (public / private), decide on the location and do not forget about those who, in fact, will use the paper.

For example, you should not buy floor structures if there are children and animals in the house.

For disabled people, a folding wall handrail with a holder is made. It is able to move from vertical to horizontal position.

The holder is self-adhesive and has suction cups - a good solution for toilets with low traffic levels.

If the private toilet is separate , you can get by with the simplest open-type model - a curved hook.

For public restrooms, models with rigid mounting are chosen. The ideal option is accessories with a mechanical dispenser (for maximum hygiene).

For a private room combined with a bathroom, it is also better to choose a closed holder. This device will protect the paper from moisture.

For restaurants, cafes and offices, an automatic device for 2-3 rolls with a built-in sensor would be a practical choice. They are equipped with a button for adjusting the tear-off length of the tape. The sensor reacts to the approach of a hand. The dispensing mechanism receives a command to rewind a piece of a certain length. There are models that operate on mains power or on batteries. The automatic dispensing system measures and cuts paper, reducing the cost of purchasing consumables by 6-8 times. The contactless dispenser ensures maximum hygiene by preventing infectious agents (viruses, bacteria, etc.) from coming into contact with the skin.

Recommendations and tips

To create comfortable conditions and convenience for using the holder, you must follow the following recommendations:

the distance on both sides from the toilet should not be less than 35-45 cm;
maximum height – 60 cm;
should be installed on the right side;
the product with a lid meets all hygiene standards - the paper does not get dirty and cannot be damaged by dirty or wet hands;
the paper is installed with the end up - it looks aesthetically pleasing, and the paper will be convenient and easier to unwind.

When choosing a paper holder, they are guided by the interior and style in which the room is decorated. If the toilet room is just about to be renovated, then use universal holders of classic colors and colors that match any design.

The method of fastening is also taken into account. It depends on a person’s preferences, since everyone chooses for themselves which holder is more convenient for them to use – wall-mounted or floor-mounted. Those who have pets or small children in the house are recommended to use wall products.

Homemade holder

With your own hands you can make cool holders in the form of a charming doll (the roll is put on your hands, simulating a muff) or a funny animal. This is a good alternative to store-bought products. When making such accessories, improvised means are used: steel wire, a plastic bottle, an old video cassette. Sometimes they are made from scratch (knitted cover, wood structure).

Their advantage is an original and exclusive appearance , which allows you to enliven the interior of the toilet. Another plus is saving the family budget.

On the Internet you can find master classes that describe in detail how to make a personalized (gnome, Baba Yaga, Madame Fu-Fu) or other original holder. Here are the best tips:

1. A cheap designer accessory can be made from an old children's toy with a long neck (giraffe, dinosaur).

2. From a plastic bottle . This option is unlikely to decorate the restroom, but its installation as a temporary accessory for a country toilet will be quite justified.

3. Made from PVC pipe . Three cut pieces (2 pieces of 10 cm each and 1 slightly longer than the roll) are connected into the letter “P” using corner fittings. We put flanges on the ends of the pipes and fasten the structure to the wall.

4. To make a doll you will need a pattern. The body can be made of nylon or flesh-colored fabric. Synthetic winterizer is used as a filler. The clothing is usually a robe, a scarf, cap or towel is put on the head, and slippers are put on the feet.

5. Lace attached to tape - the easiest to make, but not a very presentable option.

How to make a design with your own hands

Holder doll

You can make a toilet paper holder with your own hands. Before production, the design and model are first determined.

Method 1

You will need an old rusty L-shaped pipe. This holder does not require much time to manufacture and is easily installed on the wall using liquid nails. To do this, you need a special mounting adhesive, which can be purchased at a hardware store.

Method 2

If you have an old skateboard, making a holder will not require much time or effort. To do this, get rid of the wheels and attach the structure to the wall using the same mounting adhesive or liquid nails.

Method 3

Take an aluminum wire about 1 m long. Using pliers, bend it into a hook. Then the remaining length is bent into a frame. The end of the wire is twisted around the existing hook in the form of a loop. This is done to make it easy to remove the roll. Sometimes the paper holder is decorated with additional decorative elements or painted. The color is selected taking into account the design style of the toilet room.

Method 4

For the holder doll, you first need to prepare fabric. Stretch material is suitable for this. Cotton wool, padding polyester, and wire are used as filler. The material for the paper holder will be cardboard or thick paper.

This method is suitable for those who do sewing or knitting. Fantasy and imagination will help you create a truly amazing and original paper holder.

Equipment and price

The functionality of the holder is enhanced by additional elements. This could be another accessory for a spare roll or a hinged cover to support paper. Naturally, the cost of such products is higher than that of standard models.

Buyers appreciated the practicality of multifunctional holders . They often look for models equipped with a basket for a freshener. This option is very convenient and always relevant. You can find very budget models made of plastic:

A toilet brush is a must-have attribute of any bathroom, just like toilet paper. Therefore, the decision to produce “2 in 1” holders is dictated by logical considerations. As a rule, they are a stand. It turned out to be practical to produce vertical models in a set with a sanitary brush. The upper part of this design is usually reserved for storing paper, and the lower part for brushes. Some models are designed for only one roll, others include a compartment for spare raw materials.

You can find models equipped with a newspaper box . Such structures are also usually made floor-mounted.

If the bathroom is combined, it makes sense to buy a towel holder . There are compact models that are mounted under the cistern lid.

Convenient devices with a shelf for placing a phone , detergents and other items. Such holders are usually mounted on the wall.

There are also models with a smartphone tray . There is a saucer right below it. By pulling it towards you, you gain access to a separate compartment for storing personal hygiene items.

Also on sale you can find dispensers with a drawer for storing other personal hygiene items. In this device, toiletries do not get damp and are always at hand.

For amateurs, very unusual options - a built-in player, music speakers, an electronic clock, a calendar. Such modifications operate on batteries.

Prices for holders vary widely: from several hundred to several thousand rubles and even several tens of thousands (if we are talking about luxury products). The cheapest products for the most part turn out to be the worst in terms of quality. Having spent a large amount on purchasing a holder, you can count on it to meet your expectations.

Modifications

For paper and air freshener

Multifunctional holders are liked by customers for their practicality. Models that include a basket for air freshener are very popular - after all, this is very important in the toilet. Usually the material of manufacture is metal.

An example of a wall model of this kind is another Turkish paper holder from, called “Listik 2530”. It is similar to the product described just above, but differs in a neat basket for the air freshener attached to the left. Price – 1.24 thousand rubles.

And the German-made Swing 326E model looks very stylish. It is also made of brass, with a chrome finish. The bracket attached to the wall is connected to a curved metal rod. One part of it is used to place a paper roll, closed with a beautiful matte lid, the second ends with an openwork basket. Price – 5.1 thousand rubles.