Series GMS-1 (GMS-2001) repair of interpanel seams in a standard series:

Typical panel houses GMS-2001 (Glavmostroy-2001), which are often referred to as GMS-1, were designed by a team of specialists from Glavmosstroy and TsNIIEP housing.

The first houses appeared in 2003 and today there are already about a hundred of them in Moscow and the Moscow region.

The project allows, within the series, to build both single-entry towers and multi-section buildings of various heights and configurations, taking into account the topography, urban planning tasks and available space.

Over time, the decoration of the facades changed, becoming brighter, and all loggias became glazed.

The HMS-2001 Project has sections (entrances) intended for municipal construction and for free sale (commercial apartments).

Houses GMS-2001

Load-bearing walls GMS 1

Short description

The GMS-1 series provides: spacious halls, rooms for concierges, electrical switchboards, wheelchair spaces, ramps for people with limited mobility, spacious elevator halls. All apartments, except those located on the ground floor, have loggias. The GMS-1 system contains a base that allows you to solve any problems in apartment planning. In particular, the bathrooms are designed in such a way that they are not adjacent to the walls of neighboring apartments.

Houses of the GMS-1 series (Glavmosstroy-2001) are externally recognizable by narrow paired windows in many rooms, and by the texture of external panels characteristic only of this series.

Experts consider GMS-1 a real godsend for consumers, because the series is practically devoid of technical shortcomings, and the architectural and color variety of facades allows you to create unique buildings that fit into the environment.

Location in Moscow and Moscow region

In Moscow, houses of the GMS-1 series were built in the areas of Maryinsky Park, New Kozhukhovo, Yuzhnoye Butovo (including the Moscow part of Shcherbinka), Mitino, Severny village, Lyublino, Marfino, Lyuberetskie Polya, Biryulyovo-Zagorie, and on the site of demolished dilapidated houses in Kuntsevo , Perovo, Koptevo, Ochakovo, Tushino, Khovrino and other areas.

In the Moscow region, houses of this series have been built/are under construction in Krasnogorsk (Antennae Polya microdistrict) and Krasnogorsk district (Putilkovo), as well as in Lyubertsy, Zheleznodorozhny and Podolsk.

Apartment areas

Detailed Specifications

Load-bearing walls - internal inter-apartment and interior longitudinal and transverse walls. Punching additional openings is allowed only in agreement with the relevant authorities

Painting at the panel production stage. Colors: white, beige, brown, turquoise, yellow, orange, pink

Source

COST OF JOINT SEALING SERVICES

In order to find out the exact cost of joint sealing services, you need to contact our specialists. However, we can tell you approximate amounts right now:

* 30 linear meters - 1 room apartment;

* 30..39..46 linear meters - two-room apartment; depending on its location in the house (end or non-end, corner)

* 3-room apartment in this series - from 44 (not end) to 74 linear. (end)

As a rule, the square meters of one-room housing are less than 30 linear meters. meters, regardless of whether we are talking about an end or non-end apartment. The cost of work for the STANDARD option is 10,500 rubles, for Warm seam - 3,000 rubles more. It also matters whether it is necessary to open the seam completely or partially.

13,500 rubles is the minimum order amount for insulation of interpanel joints. The price already includes all possible expenses - materials, services themselves, payment for access to the roof.

Coordination of services with representatives of regulatory organizations, for example, with DEZ, is undertaken by the specialists of our company.

How to order repairs to the interpanel seams of your apartment?

The application is made 1-2 working days before the start of work.
This time will be needed to obtain permission to work from Des or the management company. The work itself on external sealing of panel joints is carried out during the day from 9-00 to 19-00. To make an application: - Call ☎, and the manager will accept your application and answer your questions. For the convenience of customers, a calculator has appeared on the company’s website to calculate seam insulation services. In order to calculate the cost of sealing, you need to select the number of storeys of the house and the type of insulation. Then click on the CALCULATION button, after which the card for filling out the client’s data will open:

⇆ Calculation
What you need to know about sealing seams: / Who should insulate interpanel seams and at whose expense? / How to force the management company to seal interpanel seams? / Reasons for the appearance of mold on the walls of an apartment / The walls in a panel house freeze, what should I do? / Typical mistakes in sealing seams between panels / Instructions, building codes, VSN, regulations for sealing seams

Options for redevelopment of apartments of the GMS-2001 series

Photo of the house of the GMS-2001 series

Plan of load-bearing walls of a house of the GMS-2001 series

Description of the GMS-2001 series

Standard panel houses GMS-2001 (Glavmosstroy-2001), often designated as GMS-1, were created by TsNIIEP housing specialists to maximize the use of a standardized set of building parts during their construction, which made it possible to implement variants of tower and multi-section buildings in a series.

In addition, the series was designed for increased seismic resistance and protection from the so-called progressive collapse.

From 2001 to the present, houses in the series have been built in Moscow and the Moscow region.

With a design number of floors ranging from 9 to 18 floors, the 17-story version is most widespread.

The apartments range from one to four rooms, some apartments have bay windows, and all apartments have glazed loggias.

bathrooms in all apartments, except for the one-room version intended for municipal occupancy. Three-room and four-room apartments intended for free sale have two bathrooms.

The ceiling height in residential areas is 280-300 cm.

Passenger (up to 400 kg) and cargo-passenger (up to 630 kg) elevators

The houses have a standard set of communal amenities.

advantages - high ceilings, good sound insulation, large areas of rooms and kitchens.

As disadvantages, we can note narrow corridors in most apartments, and extremely limited possibilities for redevelopment of the premises.

Source

Options for redevelopment of apartments of the GMS-1 series

Photo of the house of the GMS-1 series

Plan of load-bearing walls of a house of the GMS-1 series

Description of the GMS-1 series

Standard panel houses GMS-1 (Glavmosstroy-2001, often referred to as GMS-2001) were created by TsNIIEP housing specialists to maximize the use of a standardized set of building parts during their construction, which made it possible to implement variants of tower and multi-section buildings in a series.

In addition, the series was designed for increased seismic resistance and protection from the so-called progressive collapse.

From 2003 to the present, houses in the series have been built in Moscow and the Moscow region.

With a design number of floors ranging from 9 to 18 floors, the 17-story version is most widespread.

The apartments range from one to four rooms, some apartments have bay windows, and all apartments have glazed loggias.

There are separate bathrooms in all apartments, except for the one-room version intended for municipal occupancy. Three-room and four-room apartments intended for free sale have two bathrooms.

The ceiling height in residential areas is 280-300 cm.

Passenger (up to 400 kg) and cargo-passenger (up to 630 kg) elevators.

The houses have a standard set of communal amenities.

The series has many advantages - high ceilings, good sound insulation, large areas of rooms and kitchens.

As disadvantages, we can note narrow corridors in most apartments, and extremely limited possibilities for redevelopment of the premises.

Source

Houses of the GMS-1 series, apartment layouts

By a team of specialists from Glavmosstroy and TsNIIEP housing, under the leadership of Honored Architect of Russia Yu.P. Grigorieva

a system of new large-panel residential buildings
“Glavmosstroy-2001” (GMS-2001)
.

A system has been introduced to the Moscow market that fully meets all regulatory requirements, including sound insulation, thermal protection, and resistance to chain collapse.

The authors managed to combine the advantages of factory-made large-panel housing construction (quality, control, all-season availability, speed) with the architectural diversity and expressiveness of façade solutions inherent in individual construction.

The GMS-2001 system provides facades with a rich set of architectural decor and their composition, in relation to a specific building area or the address of an individual house.

Along with external walls made of large panels, it is possible to use small-piece materials (cellular concrete blocks, brick with effective insulation, etc.). This allows, in principle, to change the external architecture of large-panel buildings and significantly improve their performance. The block sections are built on transverse load-bearing wall spacings of 3.3x6.3 m. The introduction of a 6.3 m spacing made it possible to create the most comfortable apartments in which the bathrooms are not adjacent to the walls of neighboring apartments.

For the first time in Moscow, large-panel houses with a floor-to-floor height of 3 m began to be built.

In the GMS-2001 system, block sections are specially developed both for municipal construction and for the sale of apartments to the population (block sections for commercial purposes). A smoke-free staircase of type N-1 makes it possible to use GMS-2001 at home not only in Moscow, but also in other regions of the Russian Federation. The basic number of floors is 9-17 floors. The design makes it possible to build 25-story buildings GMS-2001.

Soundproof and collapse resistant. The floor thickness of 160 mm accepted in houses allows for standard sound insulation for any floor design. Internal inter-apartment walls of a standardized thickness of 180 mm can significantly increase sound insulation from airborne noise and build houses up to 25 floors inclusive without readjusting production. Special design solutions ensure the building's stability from progressive collapse.

Thermal protection and engineering equipment. The thermal resistance of the wall is high and is at least 3.2. Increased heat and noise protection is provided by modern window blocks with a frame thickness of 128 mm.

For internal engineering equipment of houses GMS-2001

(elevators, electricity and water supply, ventilation, and heating) the most efficient systems and modern materials are used, increasing the reliability and durability of the home's engineering.

The plant's capacity allows the production and installation of up to 500 thousand sq.m./year of houses of the GMS-2001 system

The first houses of the GMS-1 series: Maryinsky Park

March 25, 2003 capsule laying.

Photos of houses GMS-1 (GMS-2001) in Moscow and Zheleznodorozhny (Olgino microdistrict).

Captain

Emperor

Group: Administrators Messages: 2490 Registration: 14.4.2008 From: Moscow time

Reputation:
27
Captain

Consul

Group: consultants Messages: 997 Registration: 6.8.2008

Reputation:
25
Source

The main foundations on which our company is based

• Quality comes first. We always strive to achieve maximum results. Regardless of what class of repairs are being carried out, we always follow technology so that the work we do will please you for many years.
• All the best goes to the client. That's why we provide step-by-step pricing, allowing you to track your costs.
• Do not interfere or bother. Our specialists always work autonomously, you do not depend on them, and they do not depend on you. That is why during the renovation period you can go on vacation or just go about your business without being distracted by workers.
• Honesty and integrity. Before starting construction work, we always determine realistic deadlines and clear costs. In the future, we stick to our promises, do not delay the repair process, and there is no question of incurring additional costs.

Make your choice in favor of LionGroup. We assure you, you won't regret it.

I have a slightly larger room, it turned out like this

I am planning a dressing room like this. The room will have shelves for small items and a chest of drawers. Do you think there is not enough space for the 1st +\- 1?

It’s tempting to divide the nook at the entrance into a wardrobe for outerwear and a dressing room from the room - all the clothes go there.

And then - according to taste and preference. I wouldn’t try to cram both a bed and a sofa into the room - the room is too small for that.

You are right about the room, it is small for zoning. But will it be convenient about the dressing room? I was planning to do something like this.

I did this in my studio. The plan, however, does not indicate a wardrobe at the entrance. but this was exactly the idea - to divide this appendix functionally: a spacious closet at the entrance and a dressing room in the sleeping area.

https://eva.ru/albumpage/226720/638635.htm the first is a general plan (without furniture), the third picture is the door to the dressing room.

I would make a separate bedroom in the hall like this: https://www.ikeahackers.net/2010/10/turn-your-studio-apartment-into-1.html A double bed 1.40 m plus soundproofing will fit exactly. Then the one who is tired can sleep peacefully, and the one who is not yet can do something in the room.

the bed can be made on a raised platform and a wardrobe under it (you can make retractable clothes hangers).

In the future, you can also divide the room into 2, the walk-through room will serve as a living room, and the right side of the plan will serve as a children’s room. 8m2 for the living room just seems like a little, but it can be done if there is a good (folding) table for company in the kitchen, but we don’t accept large groups in the living room. It is important to make the most of the space, i.e. a flat-screen TV on the wall or a cabinet, instead of a table - an ottoman in which you can put things and on top of which you place a tray when, for example, we drink tea in the living room, and so on. You can and should take a folding sofa (in case your mother or other guests arrive).

So some people can’t sleep together at all, she kicks, he snores like a hog. And yet - I had a grandmother, so for her the whole sofa was a single one. Even on the plane, we had to reserve two chairs. So what?

A bed is an individual matter, and it’s not just a matter of size. Likewise, the mattress, for good reason, needs to be selected separately for each person. Because it is not a fact that the mattress that suits a 45-kilogram girl will suit her 90-kilogram husband. But a nuance: the desired does not always correspond to the possible. In this case, we have a one-room apartment and not a country house, and, especially if one of the spouses is a lark and the other is a night owl, it seems to me that it is still worth trying to implement a separate (from the living room) sleeping place. But it’s our job to decide who will live there – to offer different options.

Dear Natalya, I have something like this (1.20 to 1.80) and I’m disappointed with the capacity. It is very impractical to climb into it with a basket of ironed linen - the basket sometimes clings to a dress, sometimes to a jacket. There was more room in a regular closet than in this one. It takes a lot to walk through, a lot of space is wasted at the top, and it’s impractical to put clothes up and climb for them every time. Moreover, one of my friends also did something similar to himself, and he did the same.

I advise you to first try on the capacity if you do; take cardboard boxes and a mop and build shelves and a rod, see how many clothes you can fit. If it suits you, good luck, but to be honest, I regretted it. Although I don’t have an acute problem with floor space yet, so I’m not going to change anything yet, I admit that a separate room for clothes gives a certain mood in the morning. I stuffed it with dry ground coffee in bags, since there is no ventilation in it, the smell when you enter is very noticeable (by the way, the fact that there is no ventilation means that you need to install a chemical dehumidifier). You can’t smell the coffee on your clothes, but last year I dried lavender there (it grows beautifully in a pot at home on a sunny windowsill). Aromatherapy. But all the same, considering how much time I spent adjusting all these shelves to size, sanding (and this was with a machine), painting, sanding again and painting again (I made it from old boards). I could just as easily build a wooden cabinet. It would make more sense.

Tense vector

Project concept:

Creating an open space that combines the hallway, living room and office. The use of natural wood texture is a key solution to maintain a consistent style for all interiors.

The project is designed for a family of two people. Hosts are expected to meet with friends “on neutral ground,” so a large dining room or dining table in the living room is not needed. They often work at home, so they need a work area (preferably even an office). The authors of the project designate a room with a balcony for the bedroom. The central living space is divided approximately in half: an office is placed near the window, and the remaining part is combined with the hallway and turned into a living room-hall. To allow natural light to enter here, a sliding partition from Astor Mobili (Italy) made of frosted glass is installed between this room and the office. To fasten it across the room, a guide is installed under the ceiling.

In the design of the apartment, rare combinations of colors are used for the interior (brown with turquoise and pink), as well as original and inexpensive finishing materials. The main wall covering is paintable wallpaper without a pattern, which allows you to create the effect of plastered and painted walls. In the bedroom and living room, inserts from decorative wallpaper Green Wave (Korea) and Amazone wallpaper (Belgium), wall panels “LightDeco” (Russia), trimmed with zebrawood veneer, are used.

In the kitchen and bedroom, window sill blocks are dismantled, radiators are moved and sliding glass doors leading to the loggia and balcony are installed. The walls and ceilings of the latter are insulated and equipped with heated floors here (as well as in the hallway, kitchen and bathroom). Bathroom and toilet are combined. The new room becomes more spacious, but there is not enough space for a washing machine - it will have to be built into the kitchen. The bathroom is decorated in a fresh and original way - the interior is reminiscent of a yacht or a comfortable bathyscaphe. The ceiling is decorated with panels trimmed with zebrawood veneer. Above the bathroom there is a photo on a wall-length glass with backlight, looking like a window into the underwater world. The walls are tiled with bright blue and white tiles.

The partition between the hallway and the living room is dismantled, which makes the rooms more spacious and provides freedom of movement. For zoning, a narrow shelving unit is used here: it visually separates the hallway from the living room, and souvenirs can be placed on it. In addition, the functional areas differ in floor coverings: in the hallway - large-format (60-60 cm) polished gray tiles, and in the living room - laminate with a zebrawood texture

Another partition with a door - between the kitchen and the corridor - is also being demolished. Now a cozy dining area is visible in the open opening, and behind it there is a view of a glazed loggia with a winter garden. The kitchen differs from the living room in color scheme: here a muted pink color appears as an additional accent (upholstery of chairs, stripe on the hemmed cornice above the kitchen front). At the same time, thanks to the use of wall panels finished with zebrawood veneer, the design of this room is in harmony with the interior of the entire apartment. The working and dining areas have separate lighting.

The office is designed laconically, in a modern style. There are convenient shelves for storing books, CDs and business papers, as well as a large work area. The original slatted ceiling structure is made of light beams.

The bedroom is decorated in the energetic style inherent in the entire apartment. The wall behind the bed is covered with wallpaper in a deep turquoise tone with brown zigzag lines. The dark background at the headboard creates a feeling of security, and the color and pattern are reminiscent of a cozy curtain of foliage in a grove.

Strengths of the project:

by dismantling the window sill blocks on the balcony and loggia, the insulation of the rooms has been improved; an extended tabletop located along the window makes it possible to organize a comfortable work area by dividing the larger room into two parts; an isolated office can be used as an additional bedroom; dismantling the doorway in the kitchen allows for improved insolation of the corridor

Weaknesses of the project:

a combined bathroom, even for a family of two people, may be uncomfortable; dismantling window sill blocks and moving radiators in the kitchen and bedroom will require approval and will increase the cost of repairs

Variations on the theme of pop art.

Project concept:

Creating a bright, positive interior based on the popular style of the 60s. XX century

The project was created for a young married couple. It is designed to preserve the feeling of a bright, unforgettable holiday in the daily life of the newlyweds together, and to prevent it from becoming gray and boring. It is assumed that the wife is a student and the husband often works at home on the computer, so they need two workstations. The designer offers a slightly daring interior solution in a style close to pop art. The latter flourished in the 60s. XX century His signature visual images include Hollywood stars (including gangster movie characters), iconic pop characters, and items such as the much-advertised Campbell's Soup can, Coca-Cola, and, of course, dollar bills.

The layout of the apartment is almost not subject to change - the redevelopment affects only the partition between the kitchen and the hallway. It is dismantled and a new one is erected (moving towards the window) from foam blocks, and the entrance door is to the right, which allows you to increase the length of the kitchen front. As a result, there is room in the kitchen for a furniture column with a radius facade; A washing machine and dishwasher are also installed here. To hide the air duct running from the hood to the ventilation duct, a decorative two-level structure is built on the ceiling. Thanks to its simple, laconic form, it does not burden the interior of a small room, and the two-colored ends help to fit it into the overall color scheme of the kitchen. The walls are leveled and covered with blue water-based paint. The floor is decorated with a bright porcelain stoneware “mat”. The color accents in the dazzling white and blue kitchen are black glossy furniture facades, a table with a glass top and bright yellow plastic designer chairs. The originality of the interior is given by an “apron” made of tiles with a pattern applied using photo printing technology (images in the style of English postage stamps). To save space, the double swing door in the living room is replaced with a single-leaf sliding door (for this purpose the doorway is narrowed).

A gypsum plasterboard partition with an arched opening is being erected in the living room. It divides the room into two functional areas - an office with two workstations (in the bay window) and a relaxation area with a home cinema. For the latter, a gypsum plasterboard structure is mounted along the wall in the living room, into which sound speakers are built. In the office, a large tabletop is installed around the perimeter of the bay window, and on both sides of it there are built-in bookcases. The living room most clearly embodies the main idea of ​​the project - the use of elements of the style of the 60s. XX century Thanks to the yellow-painted walls, even in cloudy weather, the room seems to be flooded with bright sunlight. The wall with the TV is covered with multi-colored striped wallpaper. A glossy stretch ceiling of rich color creates the effect of an “emerald sky”. The hallway area allows for a storage system consisting of three separate cabinets. To the right of the entrance are wardrobes, between them is a chest of drawers with a mirror, above is a pendant lamp, to the left is a closet for seasonal shoes.

The decoration of the bedroom matches the overall style of the home. A spacious wardrobe with mirrored and white matte doors is built in here. They are decorated with vinyl graphic stickers. Instead of ordinary bedside tables, custom-made wall tables are used along with a wall-mounted dressing table and a mirror. The central element of the room's interior, along with the bed, is a gypsum plasterboard structure that seems to flow across the ceiling from one wall to another. It visually combines the sleeping area and the TV screen. A poster with a portrait in the pop art style is placed in the resulting frame above the bed. The walls are covered with paper wallpaper with stripes in candy colors.

Strengths of the project:

Minimal changes in the apartment layout Spacious storage systems in the bedroom and hallway Comfortable workspace for two in the living room Increasing the length of the kitchen front by moving the partition

Weaknesses of the project:

reducing the kitchen area due to the arch in the living room; there will be insufficient daylight in the back of the room

The effect of surprise

Project concept:

Minimal redevelopment, creation of bright stylistic images through the use of art objects.

This project is intended for a young couple and their six-year-old son. The bright, contrasting, dynamic interior style is designed for cheerful modern people without complexes who love shows, performances and adventures. The design solution is based on the use of furniture of various shapes and colors, a combination of large white and colored spots (wall planes), which form spatial accents and tie together disparate parts.

Architects try to blur the boundaries of different zones by introducing a large amount of glass into the interior. There is a glass partition between the hallway-hall and the living room, and frosted glass doors in the bedroom and nursery. Thus, light penetrates everywhere and connects everything, making the space light and airy. Only in the bedroom is a calm corner reminiscent of a country house with wooden walls, a strip of “lawn”, and rustic textiles. As the authors of the project believe, “it’s easy to demolish the partitions, but this will not solve the planning problem. Space must be treated with care.” So they achieve the desired results with some changes. For example, they arrange a passage to the kitchen through the living room. Thanks to this, it is possible to enlarge the guest bathroom due to the corridor and allocate space for a mini-laundry room. Another achievement is that a compact wardrobe is built in the center of the apartment, separating the hallway/hall from the living room.

In order to rationally use the available meters, one of the walls of the living room is expanded with a plasterboard false wall and niches are arranged in it for a home library and a collection of souvenirs. Of course, books and memorabilia can be stored in cabinets and on racks, but this is too common. In addition, this solution allows you to get by with a minimum of furniture and make maximum use of the relief of the wall surfaces. Instead of a TV, there is a home theater with a film projector and screen. A flowery patterned sofa takes up a lot of space, but if desired, all family members can sit comfortably on it. The decor of the living room resembles a kind of exhibition: a designer coffee table-sculpture, a graphic minimalist cabinet under the screen, souvenirs brought from different countries.

In the kitchen, shiny surfaces enliven the geometric interior: black and red lacquer, polished stainless steel and glass sparkle and reflect light. Straight lines and clear stripes (furniture fronts, floor coverings) are balanced by the rounded shapes of a layered “cocoon” chandelier, stool, and chair backs. The “straightness” of the kitchen is reconciled with greenery - the emerald color of hanging plants sets off the snow-white wall.

In the nursery, the preschooler is given complete freedom. A bright, colorful room is decorated with different wallpapers. One of the white walls was thoughtfully artistically “stained” with paint, and now any new blots on it will look like the result of the boy’s creativity. There is a variety of lighting here: numerous sconces on the walls, a cluster of ball chandeliers on the ceiling. The base of the bed, made of luminous cubes, serves as a night light so that the child is not afraid in the dark.

The interior of the parents' bedroom resembles the decor of a country house. The walls and ceilings are finished with boards, making the room more comfortable and warm. At the entrance to the bedroom, an additional compact dressing room is arranged so as not to clutter the rooms with massive, “oppressive” wardrobes.

Strengths of the project:

increasing the area of ​​the guest bathroom, which made it possible to install a washing machine in it; the area of ​​the large hallway-hall, comparable in size to the room, is functionally involved - there is a workplace here; spacious dressing rooms in the hallway and in the bedroom; dismantling the window sill block has significantly improved the insolation of the kitchen

Weaknesses of the project:

making an opening in the load-bearing wall between the kitchen and the living room will require coordination, as well as strengthening the walls in this area; the living room becomes a walk-through; the living room is reduced; waterproofing part of the floor in the guest bathroom

House series GMS-2001 (GMS-1)

In 2003, mass construction of houses began under the GMS-2001 (GMS-1) project. The buildings are classified as a new generation due to the use of modern industrial housing construction technologies. The buildings included all the necessary conditions for a comfortable stay: large halls, concierge areas, equipped ramps, strollers. Special design solutions made it possible to achieve maximum stability in both earthquakes and chain collapses.

You can see the GMS-2001 series houses in the following parts of Moscow:

In the Moscow region, buildings are being actively constructed and are already partially in operation in Podolsk, Krasnogorsk and Lyubertsy.

Detailed Specifications

Modern houses of the GMS-2001 type were initially designed so that in the future it would be possible to solve any problem regarding the reconstruction of apartments. For example, bathroom stalls do not have common walls with neighbors, which is very convenient. In addition, in addition to large panels, small-piece materials were also used, which opened up access to changes in the external architecture of the building. Detailed characteristics of buildings:

Among the advantages of buildings of the GMS-2001 type are: high ceilings, spacious premises, additional bathrooms in 3-4-room apartments, service areas. Disadvantages include narrow corridors and a huge number of load-bearing walls.

WHAT TECHNOLOGY DO WE OFFER?

To ensure that the insulation of interpanel joints is carried out at the highest level, we use advanced “warm seam” technology. During the work, we place tubular insulation in the seams, choosing the required diameter of this building material. The type of insulation is reminiscent of hose-like tubes. It is made using polyethylene foam and has many tiny closed pores inside. Polyethylene foam products are practically incapable of absorbing water and perfectly insulate heat. Preference is given to Vilaterm. However, Isonel, Plenex and Energoflex also have their own positive characteristics.

As a rule, problems with depressurized joints appear on the lower and upper floors of the building. The first and zero levels suffer from moisture created by precipitation. The liquid runs through the joints, using the hygroscopicity of finishing and building materials. The upper floor is not resistant due to the technical level, where liquid accumulates in the cavities of the seams.

Difficulties with refurbishment of apartments

Despite the fact that the GMS-2001 series houses have many load-bearing walls, it is possible to arrange a rebuild. To do this, you must obtain the correct project and several permits from state regulatory authorities in advance. It is quite problematic to cope with the task on your own, so there is a good reason to seek help from specialists.

"Star-Service" is a cadastre and registration center that can take care of all the paperwork regarding reconstruction in such buildings. The typical redevelopment of houses of the GMS-2001 series is described in detail in the catalogs of the State Unitary Enterprise MNIITEP. Having secured professional legal support, you can quickly draw up, execute and register all the necessary permits.

Source

Apartment layouts GMS-2001 with dimensions

The layouts of the apartments in the series are quite varied, which is caused by the need to match the project to a wide range of urban planning tasks.

A characteristic feature of the GMS-2001 layouts is the use of facade panels with paired windows, which can be seen on the floor plans.

Floor plans of the GMS-2001 series

Examples of floor plans GMS-2001

Apartment layouts GMS-1 (corner and rotary sections)