Construction hair dryers: review of proven models | TOP 12 Best: Rating + Reviews

The scope of application of a hair dryer is quite wide, so it is useful to have it in the house. As a rule, all models of technical hair dryers have an identical design. They are equipped with a durable plastic housing, a ceramic insulator with a heating coil and an electric motor.

Everyone uses a hair dryer differently - most for its intended purpose, but some not at all. Using hot air, they cut roofing felt, solder linoleum, soften old varnishes before removing them, process wood, and even solder metals. It is useful if you need to bend plastic pipes, speed up or slow down the hardening of glue, depending on its type. A construction hair dryer comes to the rescue if you cannot remove rusted screws or separate previously glued parts. A few examples of improper use are burning weeds that crawl out between the slabs of paths, accelerating the lighting of charcoal in a barbecue. Regardless of the purpose for which you are planning to purchase this universal device, we recommend that you familiarize yourself with the rating of the best construction hair dryers.

Purpose of the heat gun

There is a wide range of jobs where a construction gun will come in handy. For example, if you need to dry glue or stucco joints in a short time. Using a heat gun, you can remove paint residue from windows or parquet.

By heating the air in a hair dryer to 500 degrees Celsius, you can work with plexiglass and acrylic. This power tool is also used for soldering PVC pipes.

It is not difficult to guess that the scope of application of a technical hair dryer is extensive. Having such a device will be very useful in the household. In the photo of a construction hair dryer you can choose the most attractive unit.

Adjustments

When purchasing an industrial hair dryer, you need to pay attention to the ability to regulate the volume of air that is pumped. Unfortunately, not all types of this device provide such a function.

However, its presence makes it possible to regulate the air flow if the workpiece is too light. In this case, there is a threat that it will simply be blown away by the forced flow. If there is adjustment, this can be avoided.

Selecting a configuration option

The attachments included with the hair dryer are called nozzles, nozzles or nozzles. Basically, they are cheap, and if necessary, you can always buy the one you need. Here is a list of the main attachments.

1. Round focusing nozzles are needed for working with copper pipes and welding tape.

2. Use flat nozzles to remove old paint, varnish, wallpaper, and deform sheets of plastic.

3. A reflector nozzle with a front rounded outlet is used for bending polymer pipes.

4. Crevice nozzles will overlap the PVC pieces.

5. The cutting nozzle looks like a flattened tube; it is used to cut foam plastic.

6. Side nozzles (with glass protection) will help clean the window frame without heating the glass itself.

7. Plastic is welded using mirror nozzles.

Varieties of attachments for technical hair dryers.

The heat gun can also be equipped with additional handles, scrapers and rollers, welding rods and adapters (for connecting thin nozzles). All this fits into a suitcase. It’s not bad if it’s made of metal – after all, such devices are very fragile.

Cold air blowing

This option will also be an undoubted advantage of the technical hair dryer model.
By blowing cold air, you can quickly and efficiently cool the soldering surface. This will reduce the time it takes to complete the work. There will be no need to wait for the hot spot on the pipe to cool down. You should also pay attention to the possibility of filtering the incoming air. This can protect the device from construction dust or other types of debris, which can damage it.

The best professional construction hair dryers

Hand tools with extended motor life and increased productivity. Multi-stage temperature control and heated air flow are used. Increased power.

Built-in protective functions against peak overloads and overheating. Some models are equipped with a display for visualizing data on air flow parameters.

The tool is designed to heat surfaces and remove old paint and sealants. Allows you to weld plastic and light alloy metals. Selection criteria: power, performance, temperature range, equipment.

ELITECH TV 2000K – inexpensive among analogues

Professional series tool. Designed to heat the surface and deform the workpiece to give it a new shape. Capable of welding plastic and low-melting metals based on tin, bismuth and lead.

It will help to clean parts from old paintwork. Warms a frozen sewer or water pipe in frosty weather. Equipped with a display to display the current temperature.

Pros:

• Reliable, high quality, performs its functions perfectly.
• Complete with attachments, case, comfortable ergonomic handle.
• Temperature adjustment, “blowing out” the gun.

Minuses:

• The quality of the attachments is disappointing. With intensive use, at extreme temperatures, they quickly fail.

INTERSKOL FE-2000EM – digital temperature control

A hand tool equipped with a ceramic heater of increased reliability. This is achieved through the use of two elements. Equipped with a digital temperature control system in the range of 50~600°C in steps of ten degrees.

Operation in two modes - average air flow and maximum. Visualization of current parameters is carried out through the built-in display. It is equipped with four nozzles for heating a larger area or localizing heating during welding and soldering operations.

Pros:

• Equipment, power, digital temperature control.
• Liquid crystal display, indication.
• Comfortable ergonomic handle, the tool fits like a glove.

Minuses:

• The wire, when packed in the standard way in the case, bends too much - this is worrying.

METABO H 16-500 – optimal for commercial applications

A tool with a long service life. Equipped with a temperature control system and air flow. It is used in winter when thawing frozen water supply collectors.

Successfully destroys the structure of old paint and varnish coatings for further removal. A built-in mechanism for cooling internal components from overheating. Filters for cleaning incoming air are installed. The tool is equipped with a comfortable ergonomic handle with anti-slip pads.

Pros:

• High-quality assembly, reliability, unpretentiousness, long-lived device.
• It fits very comfortably in the hand.
• Easy to use, long soft wire.

Minuses:

• Almost nothing comes with it, just the hair dryer itself.

ZUBR FT-P2000 M2DK – a professional of domestic development

Construction hair dryer Professional series, domestically developed. Equipped with a powerful supercharger with the ability to adjust the temperature in stages. Dual-mode air flow is provided.

Supplied with a storage case, four attachments, a scraper and a spatula. It is used for soldering and welding low-melting materials, works like a glue gun, heats up old coatings with further removal. Built-in cold blow function.

Pros:

• Powerful, doesn't get hot, almost silent.
• Lightweight, doesn't smell like nasty plastic.
• Reliable, unpretentious, a true domestic professional.

Minuses:

• There is not enough specialized welding attachment.

BOSCH PHG 600-3 – professional all-rounder

Hand tools for professional use. Equipped with a reliable supercharger with a long service life. Capable of separating adhesive joints based on low-melting plastic. Warms up frozen sewer or water supply pipes.

Warms car engines in frosty weather. There are three operating modes: small, medium and maximum. Structural elements for stationary use are built-in.

Pros:

• Powerful, effectively removes old paint.
• Warms stuck nuts and bolts and removes ice plugs.
• Lightweight, wide range of applications.

Minuses:

• Does not come with a case, this is available for an additional fee.

STEINEL HG 2220 E – rod design

Professional construction hair dryer with a rod design. Equipped with a powerful, reliable engine that provides high supercharger performance. The upper heating threshold has been increased to a temperature of 630°C.

Built-in dial switch for heating degree. There are nine stages of adjustment. A wide range of professional attachments are available that expand the functionality of the tool.

Pros:

• Compact, lightweight, powerful.
• Convenient temperature switch.
• Reliability, build quality.

Minuses:

• Only the price.

What it is

Stroifen is a small-sized hand-held device that heats and supplies a hot air stream for finishing, installation, construction and repair.

Comparison optimization uses the following parameters:

• Air flow temperature. Low-temperature and medium-temperature, up to 600°C, high-temperature up to 900 degrees, specialized up to 900 degrees;
• Power. Low power (up to 1800 W), medium power (up to 2500 W), powerful (over 3000 W).
• Purpose. Technical hair dryers are divided into household, professional with precise temperature control with a capacity of 500 l/min and specialized;
• Design. A hair dryer is a pistol, straight, combined with a removable handle, of a special shape.

The device consists of the following parts:

• heating element (heating element);
• an electric motor connected to a fan or turbine;
• thermal insulation elements;
• frame;
• device control and indication circuit;
• other details to expand functionality.

Tips for use

1. To prevent the thermocouple from malfunctioning, direct the air at an angle of 45 degrees. According to some data, 95% of all breakdowns of construction hair dryers occur due to their overheating, so it is important to know how to use this tool correctly.

2. Do not work near flammable, flammable liquids.

3. Make sure that the device and the processing surface do not overheat. But don’t check the air temperature with your hand - you’ll get burned.

4. After use, let the hot air gun cool down - do not touch its working surfaces. Please note that on a very hot day, the parts of the device may take a long time to cool down.

5. Remove paint or varnish only with a scraper (included), while wearing a respirator.

6. It is better to work outside or in a well-ventilated area.

7. A hairdryer plugged into the network must not be left unattended.