The submersible well pumps presented for sale are reliable, durable and durable household equipment. Thanks to the specific design of the stainless steel body, they work efficiently in conditions of constant dampness and provide a stable supply of water resources to consumers.
Reputable and respected manufacturers, well-established in the market, provide a company guarantee for their products and provide maintenance and repair of special equipment in certified service centers. Among the variety of offers, sometimes it’s difficult to make the right choice, don’t you agree?
We offer the TOP 15 best models of pumps of different mechanisms of action with a description of their operating parameters and an assessment of strengths and weaknesses. The following selection tips will help you decide on the appropriate option for organizing water supply for a private home, cottage, watering your garden and vegetable beds.
How to choose and what to pay attention to?
When choosing a pump for a well, you should pay attention to the following criteria:
- Productivity . The pump for the well must cover at least 50% of the total water consumption in the water supply system and at the same time not exceed the flow rate of the well (so as not to suck water out of the well faster than it is collected there). The well flow rate can be viewed in the installation passport.
- Maximum immersion depth . Here we mean the depth of immersion under water, and not generally into the well. For example, if the well has a total depth of 50 m, but from the surface to the water table is 20 m, then there is 30 m of water space, and if you want to lower the unit almost to the very bottom, then its maximum immersion depth should be at least 30 m.
- Power cord length . The power cord must be at least as long as the total depth of the well (if lowered to the very bottom) plus the distance to the outlet.
What criteria should you follow when choosing a pump?
To ensure constant access to water to your home, you should carefully consider the choice of equipment for wells. The selection of the appropriate pump is carried out according to the following basic criteria:
- Required water consumption. To decide on the pump model, you must first calculate how much water needs to be supplied per day. Based on the fact that one person requires an average of two hundred liters of water per day, you can choose equipment that will not create a liquid shortage and, on the contrary, save on the cost of the device. The water flow rate in manufactured pumps can vary - from twenty to two hundred liters per minute. Additional uses are also taken into account - watering the garden or frequent use of the washing machine. For three family members, a pump with a capacity of fifty liters per minute would be optimal.
- Well depth. When choosing a pump model, the first step is to determine the acceptable depth. Such information can be seen in the passport attached to all models of well equipment. If necessary, the size of the water level in the mine can be measured independently by lowering a cable with a small load into the well. By the dry part you can determine how many meters to the surface of the water.
- Shaft size. The diameter of the recess is needed to correctly select the pump power. Usually, all data on dimensions is left by the company that drilled the well, but if there is no information, then you will have to measure it yourself. All necessary measurements in the instructions for equipment for wells are indicated in inches, so the dimensions must be converted into this value.
- The volume of water over a certain period of time. Such parameters are determined approximately. To do this, you should record the time during the period when the well is filled with water and when it is empty. To get the well flow rate, you need to divide the first value by the second.
- Pressure level. You can find out by adding thirty meters to the measured depth of the well and increasing the resulting number again by ten percent. Based on the results, a model with a suitable pressure is selected.
- Price policy. Sometimes, when purchasing cheap pumps from unknown manufacturers, buyers are faced with the problem of water leakage from underwater connecting parts. But the same problem can arise with expensive models. Therefore, you should carefully check all soldering before purchasing and choose high-quality devices from well-known, trusted manufacturers. You should also distribute the costs initially, since the operation of the well will require additional devices, such as an automatic device for connecting a pump or a cable for connection.
See also: Selecting a biological treatment station EL
Taking into account all the selection criteria, you can select a highly efficient pump. Which will serve uninterruptedly for many years.
UNIPUMP MINI ECO-2 (550 W)
Submersible well pump UNIPUMP MINI ECO-2 (550 W) is used for autonomous water supply of country houses, for organizing watering of gardens and vegetable gardens, small farms.
The pump body is made of stainless steel, the impellers are made of wear-resistant polycarbonate.
“Floating” impellers guarantee a long service life of the hydraulic part and reduce the likelihood that it will jam when pumping liquid with mechanical impurities.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 3 m³/h;
- maximum head - 65 m;
- immersion depth - 20 m;
- vertical installation.
Advantages:
- performance;
- low noise level;
- water pressure.
Flaws:
- not specified by users.
VORTEX CH-60 (800 W)
The borehole pump VORTEX CH-60 (800 W) is used for pumping clean and slightly contaminated water . Designed to supply water to the house and garden.
Stainless steel body, chrome plated pump part.
The 800 W motor allows pumping up to 3000 l/hour . The wear-resistant case easily withstands intensive use.
The thermal relay reliably protects the engine from possible overheating.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 3 m³/h;
- maximum head - 60 m;
- immersion depth - 50 m;
- vertical installation.
Advantages:
- water pressure;
- performance;
- low noise level.
Flaws:
- short wire.
GILEKS Water cannon PROF 55/50 (600 W)
The pump GILEKS Vodomet PROF 55/50 (600 W) is intended for supplying clean water from wells, reservoirs and open reservoirs, used for watering the garden and vegetable garden..
The operation of the device is automatically regulated according to the liquid level, due to the fact that it is equipped with a float switch.
To fully automate the water supply system at home, you must separately purchase the appropriate parts.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 3.3 m³/h;
- maximum head - 50 m;
- immersion depth - 30 m;
- vertical installation.
Advantages:
- water pressure;
- performance;
- low noise level.
Flaws:
- poor build quality.
GILEKS Water cannon PROF 40/50 (520 W)
The GILEX Vodomet PROF 40/50 pump (520 W) has a capacity of 2.4 m3 and a water pressure of 50 meters, the diameter of the device body is 98 mm.
The equipment is used for wells with low flow rates. Designed for pumping clean water from wells, wells, reservoirs and open reservoirs.
Pump operation is manually adjusted.
The motor thermal relay protects the equipment in case of emergency operation.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 2.4 m³/h;
- maximum head - 50 m;
- immersion depth - 30 m;
- vertical installation;
- weight - 8.5 kg.
Advantages:
- low noise level;
- performance;
- light weight.
Flaws:
- not noted by buyers.
VORTEX CH-60V (370 W)
Submersible pump VORTEX CH-60V (370 W) is used to supply water from wells, wells, reservoirs and open reservoirs for domestic needs and watering plants.
In terms of protection against electric shock, the pump is classified as IPX8 equipment and can operate completely submerged in water to a depth of 35 meters.
In this case, the distance from the bottom of the well to the device should not be less than 0.6 meters.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 1.5 m³/h;
- maximum head - 60 m;
- immersion depth - 35 m;
- vertical installation;
- weight - 10 kg.
Advantages:
- performance;
- water pressure;
- long wire.
Flaws:
- high noise level.
Optional equipment
Automation for downhole devices allows you to forget about the operation of the pump. Let's look at some types of equipment and connect it according to the diagram.
Automation
Divided into 3 generations:
- 1st generation: pressure switch, dry run blocker, float switch;
- 2nd generation: an electronic device that has several sensors installed in the pipeline, on the pump and other places. Thanks to it, the following work is performed: water level recording, dry running blocking, emergency shutdown, engine temperature control;
- 3rd generation: has advanced functions, with precise control of operation.
The best pumps for wells up to 50 meters
VORTEX CH-135 (1800 W)
Borehole pump VORTEX CH-135 (1800 W) is a high-performance device for supplying water from wells . Characterized by the ability to lift large amounts of liquid from a depth of 60 meters.
The stainless steel housing ensures long pump life.
Pumping contaminated liquid is not allowed. The distance to the bottom should not be less than 0.6 m.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 5.7 m³/h;
- maximum head - 135 m;
- immersion depth - 60 m;
- vertical installation.
Advantages:
- build quality;
- water pressure;
- performance.
Flaws:
- not allocated by users.
BELAMOS TF3-60 (800 W)
Submersible pump BELAMOS TF3-60 (800 W) is used to supply clean water located in a well at a depth of up to 80 m.
The presented model is indispensable for any owner of a summer cottage or country house that does not have a centralized water supply.
Clad in a durable stainless steel case, the device has a thoughtful design, including a specially shaped blades for stable water pressure regardless of its flow rate..
This pump is ready to lift water to a height of up to 60 m under optimal operating conditions.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 2.7 m³/h;
- maximum head - 60 m;
- immersion depth - 80 m;
- vertical installation.
Advantages:
- performance;
- water pressure;
- build quality.
Flaws:
- short wire.
BELAMOS TF3-80 (1000 W)
The BELAMOS TF3-80 submersible pump (1000 W) is designed to supply clean water from great depths . Used to work in automated water supply systems for summer cottages, private houses, farms, etc.
Built-in check valve with stainless steel spring.
The large number of pump stages and the special material and shape of the blades ensure stable pressure over a wide range of fluid consumption.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 2.7 m³/h;
- maximum head - 85 m;
- immersion depth - 80 m;
- vertical installation.
Advantages:
- performance;
- water pressure;
- low noise level.
Flaws:
- not detected by users.
Aquario ASP 1E-30-90 (450 W)
The Aquario ASP 1E-30-90 (450 W) borehole pump is used for pumping clean water from wells and boreholes . It is used in private automated water supply systems for watering, irrigation and other domestic needs.
Installing a submersible multistage pump will allow you to organize a liquid supply system from a well or other water source with a diameter of more than 10 cm.
The equipment is quite easy to install and connect to the water supply; its installation and connection will take no more than 30 minutes.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 2.82 m³/h;
- maximum head - 33 m;
- immersion depth - 50 m;
- vertical installation.
Advantages:
- low noise level;
- performance;
- ease of installation.
Flaws:
- poor build quality.
VORTEX CH-50 (750 W)
The reliable pump VORTEX CH-50 (750 W) allows you to lift large amounts of water from great depths . The equipment is specially designed for pumping liquid for various purposes from narrow openings (wells or wells).
The device is not designed for contaminated water.
The pump has an elongated cylindrical shape and resembles a sleeve. The case is made of durable stainless steel.
The device draws water through the top part.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 2.4 m³/h;
- maximum head - 50 m;
- immersion depth - 60 m;
- vertical installation;
- weight - 13.3 kg.
Advantages:
- low noise level;
- water pressure;
- build quality.
Flaws:
- short wire.
Installation and connection features
The pump is installed according to the instructions. You can entrust the installation to professionals, but if the well is properly organized, installing the unit will not be difficult even for a beginner. The instructions describe all the steps in detail. To secure it, you need to use durable materials so that the unit does not break during operation.
After installation, it is necessary to inspect the well and pump once a year - clean and rinse. To do this, the mechanism is taken out and inspected. Imported centrifugal pumps do not require frequent repairs or maintenance, but all other types require regular cleaning and rinsing of the housing from dirt and sand.
The cost depends on the technical characteristics of the equipment, as well as the manufacturer’s brand. It is not recommended to buy very cheap Chinese pumps, as they quickly break down, and it is almost impossible to find spare parts for them. In addition, the model may not be dismountable, so it will have to be thrown away.
The best pumps for wells from 70 meters
BELAMOS TF-100 (1300 W)
The BELAMOS TF-100 (1300 W) well pump is used to organize autonomous water supply in private homes and watering plants, as well as in agriculture to create irrigation systems.
The 1300 W electric motor is designed for intensive work with increased loads and provides a capacity of 4500 liters per hour.
Thermal relay protects the device from overheating.
The pump part is made of high quality stainless steel.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 5 m³/h;
- maximum head - 100 m;
- immersion depth - 80 m;
- vertical installation;
- weight - 22.1 kg.
Advantages:
- performance;
- water pressure;
- build quality.
Flaws:
- not specified by buyers.
Grundfos SQ 3-105 (2540 W)
The Grundfos SQ 3-105 (2540 W) borehole pump is designed for water supply to private houses, pumping water from reservoirs, irrigation hydraulic systems and small waterworks.
The single-phase permanent magnet electric motor is capable of high efficiency over a wide power range.
The electric motor is equipped with a removable cable connector.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 4.2 m³/h;
- maximum head - 147 m;
- installation horizontal and vertical;
- weight - 6.5 kg.
Advantages:
- performance;
- water pressure;
- low noise level.
Flaws:
- not noted by buyers.
BELAMOS TF3-40 (550 W)
Submersible pump BELAMOS TF3-40 (550 W) is used for pumping clean water from great depths into the house or for watering plants.
The design of the pump part allows for independent maintenance (cleaning) of the pump part, without going to a workshop.
To disassemble the pump part, simply unscrew the top cover or bottom flange of the pump part.
The device is supplied with a cable and a plug with a grounding contact.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 2.7 m³/h;
- maximum head - 42 m;
- immersion depth - 80 m;
- vertical installation;
- weight - 9.4 kg.
Advantages:
- performance;
- build quality;
- water pressure.
Flaws:
- not identified by users.
Aquarius BCPE 0.5-100U
The submersible pump Aquarius BCPE 0.5-100U consists of a single-phase electric motor and a multi-stage pumping part, created in the form of a monoblock, as well as a remote condensate box, which is attached to a power cord with a plug.
The electric pump has a thermal relay that effectively protects it during emergency operating conditions.
The volumetric flow of a submersible pump depends on many factors - the depth of water, the length and diameter of the hose being used, etc.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 3.6 m³/h;
- maximum head - 150 m;
- immersion depth - 100 m;
- vertical installation;
- weight - 25 kg.
Advantages:
- performance;
- water pressure;
- build quality.
Flaws:
- not specified by users.
UNIPUMP ECO MIDI-2 (550 W)
UNIPUMP ECO MIDI-2 borehole pump (550 W) is used to supply water from sources with a diameter of at least 98 mm.
Using a deep-well pump, an automated water supply system can be organized at a summer cottage, in a country house, in production, etc.
“Floating” wheels are made of wear-resistant carbonate.
They minimize the risk that the pump will jam when pumping liquid with mechanical impurities.
A special filter prevents large abrasive particles from penetrating into the pump part.
Main functional characteristics:
- submersible borehole;
- maximum productivity - 3 m³/h;
- maximum head - 73 m;
- immersion depth - 100 m;
- vertical installation.
Advantages:
- water pressure;
- low noise level;
- performance.
Flaws:
- not detected by users.
Kinds
Submersible pumps, according to their design features, are divided into two large groups:
- Rod submersible pumps . They are driven using an independent motor. It is located above the surface of the water. This process occurs due to the use of a mechanical connection - the so-called rod.
- Rodless submersible pumps . They are manufactured in one unit together with the engine. It can be either electric or pneumatic. In the first case, power is supplied using a submersible electrical cable.
According to their purpose, submersible pumps are:
- Borehole.
- Wells.
- Fecal.
- Drainage
Due to the large number of private properties in the Russian Federation, borehole and well submersible pumps are primarily popular. With their help, you can ensure the operation of an autonomous water supply system for a private home or cottage. In addition, they are often used, including in various enterprises. This is because in this way a plant or factory can meet its water needs without having to rely on centralized city systems.
Customer Reviews
Well pump BELAMOS TF3-40 (550 W) is almost silent. Compared to vibration, it is much quieter. Has a relatively small size. Great design. Good steel. It really doesn't rust. Sometimes clay gets in. But the pressure holds.
The borehole pump GILEKS Vodomet PROF 55/50 (600 W) is easily installed on wells and shallow boreholes. The body is made of high-quality stainless steel, inside there are impellers made of high-strength plastic. Low vibration level, quiet operation. The weight allows the use of a plastic head for wells.
A borehole pump VORTEX CH-50 (750 W) was installed on a summer cottage for a well. There are special rings for attaching the cable, for lowering and lifting. There is a thermostat for overheating. We got clogged with sand a couple of times, the safety device worked, we cleaned it and it works again.
