Which faucet connection is better: flexible or rigid?


How to choose a water liner? This is the question people ask when the work on installing plumbing equipment comes to an end. And this is an important point, since the water supply is the main link in connecting to the water supply. Reinforced hoses should easily supply water to any device (faucet, toilet, washing machine, etc.). The reliability of the eyeliner depends on many factors. But, first of all, it is the correct selection of the type of hose, as well as the quality of the manufacturing materials. Since the market exists many eyeliner models, then it’s not difficult to get confused when choosing them. Knowing the features of these parts will help you make the best purchase.

Until recently, connections to the water supply system were made exclusively from pipes. Often this installation method turned out to be extremely inconvenient: in cramped conditions in small bathrooms it is difficult to install rigid pipes. Therefore, an alternative was invented - a flexible hose line.

Unlike plastic or steel pipes, a soft hose has good flexibility, which is achieved through the use of elastic materials. In fact, this is an ordinary hose equipped at its ends with threaded fittings for connection to the water supply system.

The liner is versatile and serves to connect many plumbing fixtures, such as faucets, shower stalls, washing machines and toilets. When installing all of the listed plumbing fixtures, you cannot do without a flexible hose.

And although some craftsmen still use metal-plastic pipes when connecting, such a connection cannot be called reliable and convenient. In most cases, high-quality flexible liner will be easier to install and will last longer.

A flexible hose is also suitable for installing a hydraulic accumulator. It can also be used in places of constant vibration, for example, in pumping stations. Vibrating hoses withstand mechanical loads well.

Flexible hoses are especially useful when installing shower stalls. When cleaning the bathroom, you often have to move them aside to wash walls in hard-to-reach places. The hose makes this easy to do.

Tough

One of the most reliable options for connecting to the water supply network is a hard line. It is made of metal and is a tube. The production material can be:

  1. steel;
  2. copper;
  3. brass.

The method of installing a rigid line is to thread one side of the tube to the pipeline, and the other to the mixer. The metal structure easily withstands high temperatures, as well as exposure to detergents or mechanical loads, shock, friction, etc.

If installed well, rigid liner has the following advantages:

  • resistance to rust;
  • resistance to chemicals;
  • long service life - about 20 years;
  • ease of use.

The disadvantages may be the following:

  • inability to move;
  • complexity of installation.

Depending on the installation method, when connecting the line to the water supply system, additional adapters or special angle valves with connecting elements may be used.

Which option should I choose?

Experts recommend choosing the best option - a “semi-rigid” liner, which is a copper tube nickel-plated on the outside.

This type of connection is already equipped with standard fittings of different lengths for screwing into the body of the mixing valve. Collet adapters are screwed onto the other end of the semi-rigid tube with a rubber gasket around this tube. On the opposite side of the adapter there is a standard (HP or BP) ½ inch plumbing thread.

Connecting a semi-rigid line is very simple:

  1. The bodies of the collet adapters are installed at the outlet of the pipeline.
  2. Then you need to screw these semi-rigid tubes into the mixer and install it on the sink.
  3. Then you need to bend the liner to the desired place so that the tube does not fold, that is, with a large radius.
  4. After this, you need to mark the required length, put the conical part of the collet adapters on the tube and saw off the excess.
  5. Before sawing, do not forget to put on a collet clamp, otherwise you will have to file the tube for a long time and remove a long chamfer from it.
  6. Then the tube is inserted into the collet adapter bodies that are pre-screwed to the pipeline.
  7. Then you need to throw the conical parts onto the adapter and tighten them very carefully so as not to damage the rubber seals.

For installation, you only need three tools: an adjustable wrench, an open-end wrench from an auto-dialer, and a hacksaw (or a file with a sharp edge).

Semi-rigid liner, unlike flexible liner, does not need to be replaced every couple of years for preventive purposes, and is more resistant to hydraulic shocks and ruptures. By choosing this option, you will significantly increase the reliability of the connection, reducing the risk of rupture or leaks.

Flexible

Installation using flexible hoses is much simpler. The hose is perfect for connecting various types of plumbing equipment. The elastic connection even allows you to connect plumbing fixtures located at a distance from the water supply pipes.

Thanks to the flexible hose, you can install faucets anywhere in the bathroom, for example, at the edge of the bathtub or on the wall, in a corner, etc. Often, when you buy a faucet, the set is already equipped with rubber hoses for connecting to the water supply system. But in most cases, their length is not enough, so you have to purchase longer hoses.

Structurally, a flexible hose consists of a rubber hose of some length, the surface of which is braided with a metal jacket, which is necessary to increase strength. At the ends there are fittings for threaded connections. Provided that rubber is used, the hose is absolutely safe and environmentally friendly.

The service life of the flexible liner is quite long. During use, it does not emit harmful substances. The material itself withstands high temperatures, so the flexible hose can be used in hot water supply or heating. But it’s better to ask the store how to choose wiring for water with temperatures above +950.

The flexible hose can be equipped with a brass fitting; it is connected to the inlet using a special sleeve. Connections to the water supply system are made using fittings or union nuts.

The undoubted advantages of flexible eyeliner include the following:

  • possibility of hidden installation. Flexible hoses can simply be hidden in in-wall boxes. Hidden installation is especially important when installing built-in faucets, then the hoses do not spoil the view;
  • flexibility of the liner. During the installation of plumbing fixtures, you can freely move them around the bathroom area, and you don’t have to worry about the hose being damaged;
  • simplicity and ease of installation and dismantling. All you need is a wrench and pliers;
  • high quality and long service life;
  • safety in use;
  • ease of use.

However, flexible eyeliner has a number of disadvantages, for example:

  • careless handling, mechanical damage, twisting and stretching lead to damage to the hose, which will result in leakage and flooding;
  • bellows connections are noisy, especially when taps are opened simultaneously in different rooms;
  • the metal jacket will oxidize over time and begin to rust;
  • not all hoses can withstand the temperature of hot water;
  • impossibility of installation near an open flame source.

What is eyeliner and where is it used?

After distributing water supply pipes around the site, you need to connect plumbing fixtures to them. This includes taps that shut off the water supply to the device if replacement/repair is necessary, and mixers that provide water supply to showers, bidets, urinals, water heaters, washing machines, dishwashers and other devices.

Since they usually do not have the ability to connect directly to the central water supply system, an additional element is used for connection - a liner. It ensures contact between the pipes and the mixer and meets the same strength requirements.

The connection pipes are called connecting metal pipes, if they are rigid, or metal and rubber hoses with braiding, if they are flexible. At the ends of these connectors there is a thread or fitting with a union nut, with the help of which they are secured to the faucet and water socket.


With the correct combination of all elements of plumbing fixtures, the metal version looks more aesthetically pleasing compared to other types of liner

It is used not only in household plumbing, but also in industry to connect the hydraulics of complex equipment, in various transport equipment, and to connect gas pipelines to each other and equipment.

Criterion 1. Hose

A flexible line has a main component - a rubber or caoutchouc hose braided with a metal jacket. It is made from environmentally friendly rubber. When interacting with liquid, the hose does not decompose and does not release toxic substances. Therefore, flexible hoses can be used in drinking water systems. It is also quite resistant to the influence of hot water. The rubber hose can be used when installing hot water heating systems (up to +950). The main thing before purchasing is to make sure that the hose is designed for use in conditions of elevated temperatures. A sign of low-quality rubber is a strong chemical smell. EPDM material has virtually no odor.

Kitchen faucet installation

The kitchen faucet replacement is nearing completion. Now we assemble the tap and install it in place. It is much more convenient if work can be carried out on a removed sink. If this is not possible, all manipulations will have to be carried out reclining in the closet. About the same as in the photo.

Not the most comfortable position

Assembly

First, we screw the flexible hoses to the mixer. They are screwed in by hand, then tightened a little with a wrench - no more than 2 turns.

Screw the flexible hose into the holes on the mixer body and tighten lightly with a wrench

Now you need to pull a rubber gasket onto the body, which seals the junction of the mixer and the surface of the sink. This rubber ring of decent diameter is included in the kit. It is pulled through the installed supply hoses and placed on the body.

Install the gasket on the body

Modern kitchen faucets have two different forms of attachment to the sink. You saw the first one - using a nut - in the part where we talked about dismantling the mixer. It's just an "older" system. The second provides for the presence of rods and spacers-retainers in the form of a horseshoe. There is usually one rod, but there may be two. If there are such rods, they are screwed into the corresponding socket. If there is a nut on it, remove it.

Rod for additional fixation

Installation on the sink

Now the kitchen faucet can be installed on the sink. First, flexible hoses are inserted into the hole, then the housing is placed in the center of the hole. Further actions depend on the type of fastener. If it is an ordinary nut, simply tighten it, being careful not to overtighten it.

The nut is screwed onto the body

If it is a model with rods, the appearance is different, although the meaning is the same. First, the gasket is put on (it is also in the shape of a horseshoe), then the pressure plate. Next, screw the nuts onto the rods. The nuts are tightened a little with a wrench. THEN nothing complicated.

Mounting the mixer with rods

Turn the sink over and turn the tap. He should stand "dead". There should be no backlash. If there is movement, tighten the fastening.

Sink installation

Now the sink with the mixer installed on it is placed in the prepared place. First, apply silicone sealant around the perimeter of the back of the sink (not acrylic - it quickly turns yellow). Then the sink is installed in place and the mounting bolts are tightened.

Preparing the sink for installation

Then everything is simple: put it in place, align it with the edges of the table, tighten the fasteners. It is made in the form of petals that attract the sink to the countertop when you tighten the nuts. The sink should stand firmly, without moving.

Connecting hoses and siphon

With a siphon, everything is simple - pull the corrugated hose to the pipe, tighten the nut by hand until it stops. All. Don't use keys - everything is made of plastic.

Connecting the water supply is not much more difficult. You just need to be careful not to confuse the cold water connection location. Its entrance is on the right. After making sure that there is a rubber gasket in the union nut of the flexible line, we bring it to the pipe and tighten the nut as much as possible with our fingers. Then take the key and tighten it one or two turns. Do not pull too hard - you can cut through the gasket and then the connection will leak.

What about tow, winding and paste? When using normal quality hoses, they are not needed. The connection is reliable and sealed without them. It will be possible to rewind a lot if, after a test run, drops of water appear from under the nuts. But this shouldn't be the case. There is no need to just wind tow or fum tape. Extra time and extra pressure on the union nut.

After connecting to the hot pipeline, you can consider that the independent replacement of the faucet in the kitchen is complete. All that remains is to turn on the water and check if everything is working properly and if the connections are leaking. To do this, wipe the joints with a dry cloth and then apply them several times by hand.

Criterion 2. Braid

Another important part of the eyeliner design is the metal braid. Its purpose is to provide increased strength and protect the soft hose from mechanical damage and water hammer.

  • The shirt is made of stainless steel threads. An eyeliner braid from the middle price category lasts about 8 years. But in most cases, during this period the mixer is changed and the liner is changed in one thing. A metal jacket made of stainless steel threads can withstand water pressure of 10 atm and temperatures up to +950. The specified characteristics are operational; at peak load the liner can withstand higher pressure and temperature.
  • The braid may also consist of aluminum threads. Eyeliners with this type of protective jacket do not last as long as their counterparts with stainless steel protection. The braid remains reliable for 3-4 years and can withstand pressure up to 5 atm. Aluminum threads are sensitive to condensation, which leads to oxidation and destruction of the metal. When purchasing, it is easy to identify aluminum braiding - you just need to rub it with your hand and a trace of aluminum will remain on the skin.
  • The third type of protective jacket is made from galvanized wire. This type of braid is the most unreliable and is used in budget eyeliners. Its maximum operating pressure is 3 atm. Service life – no more than 2 years. Eyeliner with a galvanized jacket is usually used as a temporary one.

Sometimes you can find expensive, reinforced eyeliners on sale. Their braid is made of nylon or stainless steel threads. Such a shirt can easily withstand a pressure of 20 A) and a temperature of up to 1100. And the service life is at least 15 years.

Conclusions and useful video on the topic

The video shows how to replace flexible faucet hoses with metal ones:

Despite the fact that, due to their low cost, practicality and ease of installation, in most cases flexible versions of the liners are chosen, the rigid version will always be in demand. This is due to its reliability and durability.

At high-risk facilities, in places with large and sudden pressure changes, for example, in basements and first floors of buildings, for trouble-free operation, preference is given to metal rigid connections. Such products are more expensive than flexible ones, but even their most budget options are superior in terms of price and quality.

Still have questions about the topic of the article? Or maybe you have valuable information that you can share with our readers? Please leave your comments, ask questions, and share your experience in the block below.

Criterion 3. Connection

High-quality crimping of the tip is a good indicator of the reliability of the entire liner. The tip is one of the most important parts of the structure. The service life of the liner and its safety depend on the quality of its manufacture and crimping.

One type of defect is weak compression of the braid. This can happen either due to poor-quality liner material, or due to the lack of special equipment at the manufacturer.

Manufacturing tips and connections from low-grade metal is fraught with deformation, rapid oxidation and corrosion, which ultimately leads to structural failure. Connections can be:

  • brass LS-59 coated with nickel-chrome - lasts up to 15-20 years;
  • made of stainless steel AISI-304 without protective coating - lasts up to 15-20 years;
  • made of ordinary steel, coated with nickel-chrome - lasts up to 1-3 years. To determine the type of metal, just scratch the surface of the braid. If it is made of plain steel, the scratch will be silver, and if it is made of brass, it will be silver-yellow.

Nuances of installation work

Reliable and long-term operation of the mixer depends not only on the quality of the selected product, skillfully carried out installation work, but also on compliance with certain rules.

  1. Considering the quality of water in our plumbing system, which contains a huge amount of dirt, rust and other small particles, it is necessary to install a mesh filter at the beginning of apartment wiring.
  2. Before installation, check the quality of the liner for damage, the condition of the threaded connections, and the quality of the sleeve crimp.
  3. When installing a flexible hose, it should not be sharply bent, broken or twisted. The bending radius must exceed the diameter of the liner by at least 6 times.
  4. Do not over-tighten the connecting fittings so as not to break the tightness or damage the fitting.
  5. After completing installation, be sure to check the entire system for leaks. If no leakage occurs at the joints within 20 minutes, then everything is done correctly.

The connections for the mixer are the main supply line for cold and hot water to it. Various design solutions for sanitary fittings provide for certain connections to them. If they are not included in the kit, you must select them yourself.

A well-chosen liner and its correct installation will ensure the mixer has a long service life without problems, and the owner will not have headaches from unplanned repair work. At the same time, there are quite a few ways to connect mixers. And, as a rule, the eyeliners have a single internal diameter, which facilitates installation.

Criterion 5. Fitting

Looking inside the hose, you can see a brass fitting. Its presence is an indicator of high-quality eyeliner. In counterfeit products, fittings/nipples are often made of plastic, which is unacceptable.

The fitting is made only from stainless steel, plain or nickel-plated brass and aluminum.

Low-grade metal should not be used in the manufacture of the nipple, and the thickness of the product should not be lower than permissible. Otherwise, these shortcomings will lead to rapid failure of the entire flexible line.

What to look for when purchasing

Alas, sellers often keep silent about the shortcomings of the product and it’s possible to make a mistake even if you know what characteristics of a flexible liner are needed in a particular case. However, there are also “tricks” that will help distinguish low-quality products from really good plumbing connections. What to pay attention to:

  • Labeling. The liner for cold water is marked in blue, and the line for hot water in red. If the braid has “threads” of both colors, the product is universal, which is necessary for connecting faucets, showers, and washing machines, where the temperature options are different. PVC coated eyeliner is not marked blue/red. On such connecting elements, the characteristics are written in text, in the form of permissible temperatures and pressures. If there is no marking at all, you have a low-quality product. It’s pointless to talk about any of its merits and discuss how long it will last or not.
  • Weight. The braid cannot be weightless - even modern products in which metal is replaced with polymer are lighter, but not so much that the weight is not felt. If the product is lightweight, the manufacturer has saved on reinforcement. The strength and resistance to aggressive factors of such products is questionable.
  • Flexibility. If the seller is confident in the quality of the product, he will demonstrate that the hose can be “tied into a knot” without damaging the rubber. The second way to ensure elasticity is to let the eyeliner “hang” under its own weight. It should straighten out quickly and not look like a serpentine.
  • The smell. A “rubbery” persistent aroma is a sign that toxic material was used to produce the hose. Modern rubber is non-toxic, environmentally friendly, and even when heated it is not hazardous to health, so the absence of odor is one of the proofs that the flexible liner is of high quality.

It is ideal to have a trusted specialist help you when choosing connections. If you don’t have such a specialist among your friends or acquaintances, and purchasing flexible eyeliner is necessary, our consultants will be happy to help you choose products that will last for decades, taking into account your budget.

Criterion 6. System temperature and pressure

To correctly answer the question - how to choose a flexible water supply - you also need to pay attention to the technical parameters of the plumbing system. This is, first of all, pressure in the pipes and water temperature. If the eyeliner does not meet the indicators, it will quickly become unusable.

While you can always determine the water temperature yourself, it is quite difficult to find out the pressure parameters in the system. If it is impossible to determine specific indicators, then you can focus on standard figures characteristic of all water supply systems.

  • Central water supply - 4 atm.
  • Closed heating system with coolant circulation - 1.5-3 atm.
  • Centralized heat supply - 2-4 atm.

In the case of heat supply, peak loads are possible, so when making calculations it is better to include a plus of 20-25%.

Installation with metal-plastic pipes

Such pipes are used for both open and hidden installation.

When open, you can use press fittings (not dismountable) and clamp fittings (dismountable).

When hidden - only press fittings.

This is due to the fact that the clamp fittings weaken over time and require tightening with a wrench.

Metal-plastic pipes are sold in long-length coils, therefore, when laying pipes under screed or under plaster, it is advisable to use a solid pipe.

Metal-plastic pipes are sold in long-length coils, therefore, when laying pipes under screed or under plaster, it is advisable to use a solid pipe.

Installation of connections using threaded fittings.

Pipes and press fittings.

Criterion 8. Dimensions

When determining the dimensions of the eyeliner, it is important to know two main parameters:

  • diameter. When choosing it, you need to focus on the expected water consumption. Standard values ​​for various equipment: for installing a toilet - 8 millimeters, for connecting a faucet in the kitchen - 10 millimeters, in a bathroom - 15 millimeters;
  • length. When choosing the length, the distance from the plumbing equipment to the water supply pipe is taken into account. The hose should not be stretched or bent too much. Any mechanical deformation will shorten the service life of the liner.

Choosing the right mixer is the key to long-term and convenient use of the product.

When purchasing a mixer, you should pay attention to:

  • the material from which it is made;
  • sealing parts;
  • spout type

High-quality faucets are made from bronze or brass. Their main difference is the yellow spout neck of the device. If the neck is gray, then the mixer is made of silumin. This material wears out quickly due to corrosion.

The sealing elements must be rubber. The mixer kit must include a split spout spacer ring. Some unscrupulous sellers claim that it does not need to be installed. But that's not true. The absence of a spacer ring will cause the mixer to become loose and leak.

As for the type of spout, it is better to purchase a faucet with a swivel spout for sinks. This is explained by the fact that models whose spout does not turn are inconvenient to use. Often the stream of water hits the edge of the sink or flows down its edge. And you won’t be able to wash your face properly when water is pouring into one point.

Fitting

When installing any type of pipes during plumbing work, you cannot do without fittings, which also include all kinds of taps and valves. These can be soldered ball valves, straight or angle valves (with American type). Brass ball valves (crimp, with butterfly handle) are used, which are characterized by good anti-corrosion resistance. When connecting such a tap to a pipe, a split brass ring is used to crimp the pipe; rubber (ethylene-propylene) is used as a sealing material. Similar ball valves are three-way, with external thread, with internal thread, for connecting pipes at right angles.

Ball valve connection diagram

No special tools are required to install these faucets.

Specifications

In the plumbing market you can find two different categories of flexible hoses - adapters and extensions. Adapters are ordinary hoses for supplying water to showers, sinks or washing machines. Their length rarely exceeds 0.5 m. Using an extension cord connected to the adapter, water is supplied to those areas that a conventional hose cannot reach.

The characteristics of eyeliners of the first and second categories are similar and look like this:

  • the diameters of the outer and inner radius of the pipe are 12 and 11.5 mm, respectively;
  • the nominal pressure is 8 bar, and the maximum reaches 10 bar;
  • the minimum bending radius is 60 mm;
  • maximum permissible temperature of 70 degrees;
  • service life is at least 10 years;
  • rubber hose hardness 75 Shore;
  • The maximum tightening torque for the fittings at the ends of the hose is 50 Nm.

History of invention

What is a bellows? This design was invented by an American meteorologist at the beginning of the last century. He came up with a corrugated metal container to trap air particles that could shrink and expand with changes in pressure. He gave the name to his invention from medieval mythology - the spirits of the air were called sylphs. The unique property of the bellows to maintain tightness even with multiple deformations has found wide application in a wide variety of industries. Bellows water line is one of the most common uses of this invention.

New eyeliner called Altstream Super

This is not an advertisement, but a review of a new product. Made from high quality material – cross-linked polyethylene. Due to this, increased resistance to pressure and temperatures.

Photo: i6.otzovik.com/2018/11/27/7310470/img/83060743.jpeg

Photo: i6.otzovik.com/2018/11/27/7310470/img/83060743.jpeg

The company’s statement that the eyeliner has a service life of more than 50 years is surprising. Plus

It also helps that the company
labels
the eyeliner itself.
Other analogues only have a tag indicating the manufacturer and characteristics. Once installed, people usually tear them down and throw them away. New eyeliners come with laser marking (company logo). Costs 190 rubles for 50 cm
.

Image: ic.pics.livejournal.com/orlllangur/18753870/522209/522209_600.jpg

Image: ic.pics.livejournal.com/orlllangur/18753870/522209/522209_600.jpg

RepairDom channel: subscription . Thank you for the likes and all the best!

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]