How to collect water from the floor when a room is flooded using a pump. Drainage pumps for pumping water from the floor surface

To carry out high-quality wet cleaning at home, just pay attention to electric mops that will help clean the floors.

The operating principle of an electric mop is as follows: clean water with a special agent is supplied through a sprinkler to rotating rollers, which allow you to wash the floor, and the dirty liquid is sucked into the container.

Previously, they could not even think of such a device, but technology does not stand still, allowing us to simplify our lives.

This is a great gift for your beloved woman. In order not to get lost in the choice, a rating has been created to help you find the best electric mop for your home.

Basic rules for cleaning and cleaning the floor after whitewashing

Before you clean the floors, it is recommended to know about some nuances that will allow you to achieve maximum results. You should start washing the floor from the baseboards, moving from the walls to the center of the room, so that it is easier to collect all the dirt with a rag or mop. The unpainted surface must be moistened with a heated solution of water and soap, wiped with a brush, and then rinsed with water and wiped dry.

In the question of how to clean a painted floor, ammonia diluted in water will help. The surface is washed, dries for a while, and then it needs to be brought to a shine using cloth. If you have a problem with how to wash a “sweet” floor, you need to add a little acetic acid to the water and thoroughly wipe the sticky area.

The sequence of actions when cleaning the surface after whitewashing, which allows you to avoid severe stains, is as follows:

Fill the entire contaminated part with a soap solution (highly concentrated);
After all the remnants from the repair have acidified, collect all the dirt with a rag, rinsing it often in water;
Add table salt or kerosene to a clean soap solution, moisten a rag in this solution and rinse the surface thoroughly;
The final stage is the use of warm water and rags.

This way, the floor surface will be cleared of repair residues and there will be no white streaks left on the floor.

What to do if water gets in

Robot vacuum cleaner polaris pvcr 1015 golden rush
When water spills on the parquet floor, you can’t hesitate, because it will come out sideways in the form of swollen panels. You need to quickly collect the liquid from the floor surface so that the coating is not damaged as much.

Water quickly penetrates the joints of the panels, because no matter how quickly the puddle is removed, good ventilation in the room is still needed. You need to open the windows and leave them in this position so that the floor dries faster. If you do not react promptly to a possible threat, you will subsequently have to hold your head and look for information on the Internet like: “The parquet is swollen, what should I do now?”

If the coating has managed to absorb moisture or it has gotten under it, then the damaged areas will soon have to be replaced.

Swollen parquet needs to be partially repaired

But first of all, you need to wait until the boards dry, only after that they are replaced. New planks are selected according to color, type of wood, and size. But wet slats have different sizes.

Replacing a section of floor

If the damage to the flooring is small, there is no need to replace the entire parquet floor. Partial replacement of planks is easy.

After the floor has dried, the defective areas are removed. In this case, the reserves that remain from the first batch will help. If the parquet floor is artistic, then it will not be possible to simply replace the planks. It will have to be restored, and only professionals can do this.
After removing damaged planks, an assessment of water penetration under the coating is needed. If it lingers on the waterproofing, then the first thing you need to do is dry its surface. Do not use a hair dryer because hot air can burn through the waterproofing film.
You need to wipe off the condensation from the surface and leave it to dry. You can use an electric gun heater to dry the moisture faster on the floor surface.
Clean out any dirt between the slats.
After the surface is cleaned of dirt and dried from water, new planks are installed.

The final part of the work is sanding the coating and applying a new layer of varnish. To scrape parquet, special tools are used to remove a layer of wood in the direction of the grain. When performing grinding, do not worry that the removed layer of 2-3 mm is large. The planks have a thickness of at least 10 mm, so you can perform similar actions to give new life to the parquet once again, at a minimum.
Varnish is applied over the prepared surface. To do this, use a roller with fine bristles. It is advisable to apply varnish in 2-3 layers. Thin layers are better distributed over the surface and areas with different degrees of color do not appear. Each subsequent layer is applied after the previous one has completely dried. The time between applications depends on the type of varnish: some can dry in a few hours, others in a couple of days. As you can see, these steps are simple to perform. But they are forced, and in order not to fulfill them, you need to take care of the floor covering.

It is necessary to follow the technology so that the bar cannot rear up later

Tips for increasing the lifespan of parquet flooring

A parquet floor will last much longer if the following room factors are taken into account:

good ventilation;
Humidity ranges from 40-60%. Therefore, laying parquet flooring in a bathroom or kitchen is highly discouraged.

It is better not to lay in places subject to constant moisture.

no temperature changes;
It is not recommended to lay parquet in the hallway, where it will constantly wear out and require frequent repairs.

If you comply with the requirements of the microclimate and environment of use, you will enjoy your parquet floor for a long time. Parquet has excellent natural beauty and is an environmentally friendly product, which is why it is so popular.

In case of local damage, there is no need to resort to large-scale repair work; you can get by with partially replacing the damaged planks and covering the flooring with a new layer of varnish.

Where can I get special equipment?

There are several tools that will help get rid of moisture:

Use a vacuum cleaner that collects water. If you don't have one, you can rent one. When the vacuum cleaner stops drawing in water, this indicates that the surface is dry.
There is a special machine that is designed to collect warm water. It can also be rented.
Get advice from a carpet cleaning company. They can rent special equipment. It will help dry the product from water, just make sure that there is no moisture left under the carpet.

Why do you dream about water on the floor?

Filling the floor with leveler. Leveling the floor. What materials and tools to use. Pouring the floor with self-leveling mixture

Did you imagine that water spread across the floor? The Orakul dream book foreshadows serious problems related to well-being. This will negatively affect progress towards your goals and will delay the realization of your innermost desires for an indefinite period.

As soon as the first signs of illness appear, it is recommended to consult a doctor rather than wait for complications. Relatives can provide assistance in treatment. Don't reject their support.

I dreamed of water on the bathroom floor

Do you dream that water spilled on the bathroom floor? Expect problems related to the financial sector. You can lose your job, which will negatively affect stability and material well-being.

Problems await in personal relationships. Soon quarrels and conflicts will begin to occur. The reason will be misunderstandings.

Try to be attentive and responsible when solving assigned tasks. Your carelessness is not able to lead to the desired results.

I dreamed of water on the floor in the house

The meaning of a dream where water was spilled on the floor of the house foreshadows the emergence of difficulties in personal relationships. Misunderstandings and constant disagreements will cause a break in relationships.

You should not look for flaws in your soulmate. Recommends to analyze your actions and behavior. This will not save you from separation, but it will contribute to the establishment of new relationships.

Dreaming of water on the floor in the apartment

A dream where water was spilled on the floor of an apartment hints at the appearance of ill-wishers in your life who are jealous of your career successes. Their actions can ruin their reputation.

Try to be vigilant and pay attention to everything that happens around you. This will help you notice the danger in time and successfully avoid a collision with it.

I dreamed of water on the floor in someone else's apartment

If water was spilled in someone else’s home, expect an improvement in your financial situation. You may receive significant profits or inheritance.

Luck will smile on you soon. Try not to take rash actions or make stupid mistakes. All this will negatively affect your mood.

Collecting water from the floor in a dream

Did you dream that you started collecting water from the floor? It will be possible to resolve a conflict situation, successfully overcome an unsuccessful period in life, and eliminate troubles associated with one’s own inattention. Only favorable events await ahead.

Try not to lose concentration for a minute. The difficult period is not over yet, so you shouldn’t make stupid mistakes. Please be a little patient.

Your personal horoscope for 2021 will tell you in which areas of your life you will find success in the new year.

Did you dream about Water on the floor, but the required interpretation of the dream is not in the dream book?

Our experts will help you find out why you dream of Water on the floor in a dream, just write your dream in the form below and they will explain to you what it means if you saw this symbol in a dream. Try it!

The first half of this day will bring an increased desire for personal freedom and independence. You will want to express yourself in an original way, to prove your uniqueness.

The magazine's website contains the largest online dream book, which contains 90 collections of dreams and more than 450,000 dream interpretations. Regularly updated horoscopes for today, tomorrow, week, month and year, including love, compatibility and many others.

Cause of bloating

Types of Barrier water filters and their application

Parquet floors can swell due to a variety of factors, and in all situations, moisture is the culprit. But how she could get there needs to be figured out.

If liquid was not spilled on the floor, then it got there in a different form - vapor. It is necessary to check the humidity in the room. It must be within the range of 40-60%.
The humidity in the room is normal, which means it has absorbed moisture from below. Maybe it’s the lack of waterproofing film under the parquet or a violation of the installation technology. If under a room with parquet there is a neighboring room with high humidity, then the moisture enters the ceiling and condenses under the parquet.
If there were precedents with water getting onto the surface of the parquet due to a radiator leak or the parquet
after a neighbor's flood.
Violation of installation methods. Due to inexperience and ignorance of the correct technology for laying parquet, they do not leave innovative gaps along the perimeter of the room or lay it on a wet concrete base.

As you can see, the reasons are primitive and an examination with a hygrometer (a device for measuring the moisture in a room) will help to find out why this happened.

Cause of damage

Advice! To remove the last factor, it is necessary to require the technology to be carried out by layers or to do the installation yourself.

How to reduce damage from future flooding

To avoid becoming a victim or cause of flooding in the future, and to minimize damage, follow a few rules.

Recommendations for preventing leaks

When renovating, do not skimp on replacing old pipes, faucets, valves and plumbing fixtures.
Turn off the water when leaving for several days.
Make a large hatch in the bathroom to access the pipes. If a pipe bursts, you won’t have to spend a long time poking around with a flashlight in a narrow hatch or breaking through a wall.
Waterproof your bathroom and kitchen renovations.
Give preference to electric heated towel rails, as conventional ones often leak.
Install sensors that detect moisture in areas where leaks may occur.
Use a suspended ceiling in the bathroom. Perhaps, when flooded, it will turn yellow or lose its shape due to hot water, but it will hold up to one hundred liters and protect the walls and floor.
Insure your apartment against flooding.

Material prepared by: Maria Revina

Steam models for cleaning floors

Another device called a steam unit, consisting of two parts, will help you efficiently and quickly get rid of various types of oven contaminants and perform wet cleaning of plumbing floors. The first is the steam boiler itself, where steam is regenerated, and the second is the vacuum cleaner itself, where the aquafilter plays the role of the cleaning system. The main priorities of this model are high temperature, which will easily wash away stagnant dirt and grease; this does not even require the use of chemicals. And this is an indisputable plus, because we should not forget that the use of household chemicals is unsafe for the health of young children, the elderly and those suffering from asthma. The peculiarity of the steam vacuum cleaner is the almost simultaneous supply of steam and suction of dirt. Using a certain type of attachment, you can get rid of mold, which usually appears in the corners of rooms with high humidity, and from old grease stains in the oven and microwave.

The removal of any deposits is facilitated by the high temperature of the steam, and as we know, it is not always safe for everything. And even despite the fact that after completing wet cleaning with a steam vacuum cleaner, the surface gets rid of dirt, the model is still not free from shortcomings, in particular:

Rapid wear of connecting tube gaskets due to high temperatures;
Damage to natural fibers under the influence of steam;
Damage to surfaces that are negatively affected by temperature changes;
Due to the presence of filters, the suction power is very mediocre.

The disadvantages of steam vacuum cleaners do not detract from their advantages. Models with steam, like washing ones, have their fans. A decent line of steam units is represented by many manufacturing companies, including Karcher, Mie, Eurometalnova, Delvir, Polti, Unitekno.

Final works

At this stage, a mixture of liquid glass is taken and diluted with water in accordance with the recommendations on the package. You need to stir the solution for at least 10-15 minutes. It is necessary to obtain a homogeneous mass, without any grains or lumps. Then we cover the floor with liquid glass. This happens in this way: equal portions of the mixture are poured onto the concrete surface in strips, which are then evenly distributed using a spatula, squeegee and needle roller. The layer of liquid glass should be at least 3 mm. The entire prepared mixture must be used within an hour. It is necessary to cover the floor in one room in one go. Then you need to give the liquid glass time to dry. This usually takes 24 to 48 hours. Then the finished surface must be coated with polyurethane or epoxy varnish. Then the floor will be more transparent, shiny, and at the same time its performance will improve many times over. You will be able to walk on it in a couple of days.

It should be noted that when creating a floor covered with liquid glass in this way, the finished surface will have a grayish underlay. Therefore, it is recommended to decorate the surface in advance. Then it will be possible to create an incredibly beautiful and original floor. To do this, before applying liquid glass to the concrete base, apply some kind of ornament or simply paint it. You can also use an option that provides for decorating the floor using paper phlox. The design technology here is slightly different. First, you will need to apply a thin layer of liquid glass, then lay out the phlox, then pour another layer of the glass mixture in full, according to the scheme described above. After which it is all left to dry and then varnished.

It’s safe to say that the floor made of liquid glass will please the owners. It will become the main element of the interior and will allow you to create an original design in your home. Therefore, you should not be afraid to do it. The above instructions, divided into stages, will allow you to complete the work efficiently, correctly and quickly.

Types of equipment capable of collecting liquid dirt and water

A vacuum cleaner for collecting water and dirt can be universal - serve to collect dust and suck in water, or it can have a design that is not intended for dry cleaning of premises. For example, the Nilfisk IVB 5 WET can be used exclusively for wet cleaning, since the design does not include a dust filter.

Universal vacuum cleaners can be equipped with the following filters:

aquafilter;
HEPA filter;
separator type cleaning;
wet mesh filter.

Some models of vacuum cleaners use two filters - one is installed for dry cleaning, the second for wet cleaning. This creates certain inconveniences, because filters cannot be used for other purposes - the device will simply fail. This means that every time before starting work you need to check which filter is installed. For example, IPC Soteco Green 503 works on this principle.

Enterprising manufacturers have met the wishes of customers, and now there are vacuum cleaners with universal filters for dust and water. Example: Shop-Vac Super 1300 vacuum cleaner, which does not require replacing the filter device when changing the cleaning mode.

Vacuum cleaners for liquids and their areas of application

Among their arsenal of cleaning products, all cleaning companies necessarily have units capable of collecting not only dust, but also dirt. Most often they use professional devices that can withstand heavy loads.

Car wash complexes are in dire need of water collection units: in winter, water can leak from rubber carpets into the interior. Dirt and dampness build up under carpets. If you do cleaning with a regular vacuum cleaner, without a water suction function, there is a high probability that equipment not intended for this will simply burn out.

Construction companies that carry out work that leaves behind a lot of debris and dirt also use vacuum cleaners to pump out water. For example, when drilling and drilling openings in concrete walls with diamond discs, a large amount of liquid dirt is formed. The technology for working with diamond tips involves the use of water. Such work cannot be done without a special vacuum cleaner.

In domestic conditions, a water vacuum cleaner is successfully used as a tool that can help clean small areas of carpets or coverings. Vehicle owners use a car vacuum cleaner with a water collection function to clean the car interior at home.

Fecal pumps

A separate type of equipment is fecal pumps designed for pumping out domestic wastewater. Their design is designed taking into account the mandatory crushing of large particles of waste found in drains. Such pumps have a universal purpose, because they are made of the most durable and reliable materials, which makes their service life very long. Therefore, the pumps do an excellent job of cleaning the muddy bottom of a reservoir, at the same time fertilizing a vegetable garden or garden with spring flood waters, and at the right time they will sanitize cesspools and settling tanks for domestic wastewater.

Sources

https://LeroyMerlin.ru/advice/sad/kak-vybrat-nasos-dlya-otkachki-vody/
https://texnotoys.ru/vodosnabzhenie/perekachnoj-nasos-dlya-vody.html
https://nasosovnet.ru/drain/nasos-gruntovyj.html
https://www.kuvalda.ru/catalog/3840/
https://www.agrotreding.ru/catalog/drenazhnye-nasosy

Review of the main brands and their prices for washing vacuum cleaners

Good equipment with durability and reliable quality cannot be cheap. Among the leaders in sales of cleaning products, companies that produce expensive equipment predominate. There are devices made in China, they are much cheaper, but they do not differ in durability.

Karcher products are specially developed for car wash complexes, for cleaning and cleaning residential premises and industrial areas. Multifunctional vacuum cleaners from the Karcher MV line can operate in dry and wet cleaning mode. On the plus side: there is a nozzle for a vacuum cleaner to collect water, they are incredibly durable, versatile, and have a relatively small weight compared to devices from other companies. Cons: high price, the need to buy expensive filters only from this company. The cost of vacuum cleaners in this line ranges from $150 to $250.

Karcher has special devices that are used only for dry cleaning. These are professional units whose main purpose is to provide high-quality dry cleaning of the car interior or furniture in the house. They are not suitable for regular dry cleaning. Cost: from 450 to 800 $.

The incredibly advertised and popular PRO-AQUA device, made in Germany, costs about $2000. Distributors and dealers of the company claim that this is one of the best vacuum cleaners in the world. Customer reviews on the Internet are characterized by emotional statements, which indicates interest in it among consumers.

Hyla-NST, a Slovenian separator vacuum cleaner designed primarily for dry cleaning, costs even more, about $3,000. The package does not include a washing kit; it must be ordered separately. This vacuum cleaner is distinguished by the presence of a large number of various attachments for working in any conditions.

The Rainbow separator type vacuum cleaner surpasses all previous devices in price - it costs about $4,000, but has one significant drawback - the package includes a HEPA filter, which will have to be changed from time to time.

Conclusion: using vacuum cleaners to collect water is convenient not only for industrial purposes, but also at home. Spilled soapy water in the bathroom, wet carpets in the house or car, washing parquet floors, cleaning furniture and many other jobs require the use of special devices. The most important thing in choosing equipment is not saving money, but choosing a tool that will be safe for your home and family.

HEPA filters are already considered obsolete, and more and more manufacturers are trying to complete the production of models using such a filtration system. New generations of vacuum cleaners for home and industrial use are built on a different principle - separators and water filters, which allow you to carefully separate dust particles from air and water masses, thereby not polluting the air around you. The right choice will allow you to live cleanly, without putting your health at risk of getting sick or getting an allergic reaction from filters that emit fungal diseases and dust mites into the environment.

What characteristics should you pay attention to?

First of all, you need to take into account what kind of water will be pumped out, as well as its volume and the expected depth of intake. Today you can buy a drainage pump for dirty water in Moscow without leaving your home, taking advantage of the attractive price offer of our online store. Visually, the pumps differ in the diameter of the pipe. Because water with a diameter of particles up to 5 mm is clean, and dirty water is up to 35 mm. There are also particularly polluted waters, where the diameter of inclusions can reach 50 mm. Another important characteristics that influence consumer choice are equipment performance and pressure. Let's look at them in more detail.

Pump performance

It is usually indicated directly on the unit or in the instructions, and its value shows how many liters of water will be pumped per unit of time (l/h or m3/h). If you are good with calculations, you can easily determine the volume of a reservoir or room, and the time it will take to complete the work of pumping out the water. A centrifugal pump installed in some models as a suction mechanism can increase productivity. Of course, such an additional part increases the cost of the equipment, but by paying more, the buyer receives additional benefits in the form of protection from inevitably present impurities.

Pressure

Characterizes the height to which submersible pumps for dirty water are capable of lifting water. Typically, all “drainers” operate at shallow immersion depths, and this is indicated in the markings. It is necessary to take into account not only the vertical pressure, but also the horizontal one, which characterizes the distance over which the removed water will have to be moved. For correct calculations, you need to add up the depth and length of movement, and then buy a drainage pump for water based on the total result. This value should be on the equipment labeling with a small margin, which will serve as a guarantee of long-term operation.

Float or electronic switch

All submersible pumps presented in the online store catalogs have these two types of switches. A drainage float pump for dirty water, the price of which is the most attractive, is more often used in private households. The principle of its operation is based on the fact that the water level dropping to a critical level allows such a switch to automatically open the electrical circuit and prevent the engine from running dry, which is extremely undesirable for submersible pumps. In this case, water not only plays the role of a system cooler, but also lubricates the parts.

Pump outlet dimensions

This characteristic is also taken into account before purchasing drainage pumps for dirty water. Each pump connected to the system must be equipped with a hose or pipe. Its diameter must be equal to the outlet pipe, which will also be an additional guarantee of maintaining the performance declared by the manufacturer and will affect the service life of such a unit.

Washing vacuum cleaner for floor cleaning

Initially, a washing vacuum cleaner is designed to effectively perform wet cleaning of the floor. During operation of the device, water entering the contaminated surface through a special hose dissolves the dust and is sucked back into the dirty water container. For better cleaning, use disinfectants intended for these purposes. A washing vacuum cleaner can also easily remove spilled liquid.

As you know, an important component of a conventional aqua vacuum cleaner is the filtration system. Theoretically, the cleanliness of indoor air and, as a result, a comfortable microclimate favorable for residents depend on its properties and technical capabilities

However, in practice this is not entirely true. When water and HEPA or EPA filters coexist at the same time, there is a risk of mold, mildew and bacterial growth. When you turn on the vacuum cleaner, all these delights go straight into the air and from there to our lungs, and this, admit it, is not exactly what we expect from the word cleanliness.

The priorities of a vacuum cleaner with an aqua filter include the absence of replaceable dust collection bags and the ability to deodorize it, for which a flavoring liquid is poured into the vacuum cleaner before starting to wash the floor.

Inconveniences include the need to wash the tank and dry it after completing the next cleaning. A significant drawback of HEPA filters used in washing vacuum cleaners is their clogging with large dust particles. As a result, they become an obstacle to the normal passage of air through the vacuum cleaner, causing a decrease in suction power and overheating of the electric motor. In addition, over time, an unpleasant odor begins to emanate from them.

Despite the imperfection of the HEPA filter, which forces one to resort to frequent replacement to ensure normal operation of the vacuum cleaner, washing devices are quite in demand. Models from manufacturers Thomas, Karcher, LG, Vax, Zelmer especially stand out from others. They are good helpers for cleaning floors that are resistant to moisture, in particular porcelain stoneware, marble, linoleum, and tiles.

Consequences of the flood

The main problem that residents of a flooded apartment will face is standing water. If you look at the root of the problem, then all the difficulties are connected precisely with water, which needs to be eliminated. The longer the water is in the room, the larger the lesion, the greater the number of surfaces and furniture will be irrevocably damaged. The most common consequences of apartment flooding include:

Moisture permeates the walls, ceiling and furniture, and, contrary to expectations, it is not only the floor that suffers.
Flooring is something that needs to be completely replaced. If you can still try to save the decoration of the walls and ceiling, then the floor, in most cases, is irretrievably lost. The exception is concrete floors and tiles in case of rapid water removal.

Flooding of electrical wiring is the most dangerous phenomenon during a flood. The consequences can affect not only the affected apartment, but also the surrounding apartments along the riser and even along the entrance.
For a long time after flooding, the smell of dampness persists in the apartment, which is almost impossible to remove until the root cause is eliminated and the furniture dries out.
It happens that flooded finishing materials during the drying process may seem practically undamaged. Be careful with the decision to leave the finish the same, such self-deception can lead to the development and spread of mold in a short time.

We choose for ourselves

Each type has its own advantages and disadvantages. And each housewife will choose a tool to suit her requirements and wallet. But housewives have different needs: one has a small apartment and there is no one to dirty the floor, so it is enough to wipe it once a week from dust and that’s it. Another has two Persian cats and struggles with fur - daily and merciless. The third has a two-story mansion and children.

What to pay attention to

So what should you pay attention to when choosing a mop so that it becomes a truly indispensable assistant? Here are the main points to consider before purchasing

Handle material. Don't buy a plastic mop. It won't last long. Reliable handle - made of metal or metal-plastic.
Ergonomic design. The handle should fit comfortably in your hand and be adjustable to suit your height. If the platform is rotating, move it across the floor in different directions, feel whether it is obedient, whether the mop fits under the furniture and how it fits into the corners. Does the mop have a wringer mechanism? Where is it located and is it convenient for you to use?
Nozzle material. Here you need to tell the seller the type of flooring in your home. After all, each attachment performs its own function: one copes well with linoleum and tiles, the other is capable of wiping the floor dry and will not spoil the laminate or parquet, and the third will treat the most “treacherous” places on the carpet or vinyl covering.
Reliability. Evaluate the methods of attaching the handle to the platform, the butterfly folding and spinning mechanism, if any. They shouldn't be flimsy. If at least one “weak link” is discovered, that’s where the mop will break. And quite quickly.

Mops: what and why

It is worthwhile to dwell separately on what type of coating the various nozzles are intended for. Actually, the term “mop” refers to a replaceable nozzle that fits onto the platform. Mops are made from natural, synthetic or mixed fabrics.

Sponge. It collects dust and fur well from any surface. It’s also convenient for quickly wiping up spilled liquid. However, this attachment does not wring dry and may leave streaks and some water on the floor. Accordingly, it is not suitable for laminate, wooden floors and parquet. But on linoleum, tiles and vinyl flooring it shows decent results.
Cotton. Absorbs moisture well and collects small debris, threads, wool and other dirt. But it can leave lint and, as a result, whitish stains on the floor. Not suitable for wood, laminate and parquet. Recommended for linoleum, tiles, vinyl. Machine washable.
Synthetics and mixed fabrics. They absorb and release moisture well. This means they are wrung out dry. Therefore, they are recommended for wood, parquet, laminate. They are also good at collecting dust and fur. But synthetics do not tolerate high temperatures.
Microfiber. Perhaps the most practical material. This attachment will collect debris and will not damage the parquet. Suitable for any type of coating. But machine washing is not recommended.

Drying the floor covering

Floor coverings suffer the most from flooding. In this regard, carpets and rugs must be taken out into the air to dry, wooden coverings: parquet or laminate must be disassembled to avoid deformation and swelling. It is advisable to remove the linoleum. The underlayment under the laminate will most likely have to be replaced. The freed concrete screed must be thoroughly dried.