How to design a water filter for a vacuum cleaner with your own hands, a detailed guide


One of the useful electrical appliances that many houses and apartments have is a vacuum cleaner. To clean efficiently, experts advise choosing a model with an aqua filter.

This vacuum cleaner perfectly removes dirt and also absorbs dust from the air. You can build a water filter for a vacuum cleaner with your own hands; for this, ordinary devices are used, for example, plastic bottles, pots or buckets.

Disadvantages and advantages of vacuum cleaners with a water filter

The stores have a huge selection of vacuum cleaners equipped with a water filtration system. They differ from each other in configuration and various functions, and they all have their own advantages and disadvantages.

Here is a list of the main advantages of these electrical appliances:

  • high-quality cleaning. The vacuum cleaner removes the smallest particles of dust, dirt, pet hair and other debris;
  • allow you not only to clean carpets and upholstered furniture, but also make it possible to thoroughly wash floors and also collect liquid from the floor;
  • Excellent replacement for an air purifier. Thanks to this vacuum cleaner, the air is filtered efficiently, dust and other allergens are removed from it.
  • Disadvantages of an electrical appliance with an aqua filter:

  • impressive size and considerable weight. Carrying such a device or carrying it across thresholds from one room to another is quite difficult.
  • Upon completion of use, the internal parts and reservoirs must be washed and dried. If this is not done, then during subsequent use a not very pleasant smell will appear;
  • It is important to strictly follow the operating instructions. If you violate the manufacturer’s recommendations, unpleasant odors will appear and water will begin to pour out;
  • considerable cost. Devices with an aquafilter are not cheap, but their price gradually pays off, since you do not need to purchase a replacement bag or filter.
  • Such a device is not very complicated in design; it will be useful for those who have animals at home, as well as if a person has any diseases of the respiratory tract or organs. This useful device allows those with asthma and allergies to breathe more freely.

Vacuum cleaner with aqua filter

Any vacuum cleaner with a water filter is an electrical device that has a special tank - a container filled with water.

When a vacuum cleaner sucks air containing dirt, debris and tiny dust particles through the hose, this mass passes through a reservoir of water.

As a result, all contaminants settle and remain in this water, and the purified air is directed to a special filter, which additionally moisturizes and cleans it. As a result, fresh and purified air is supplied to the room.

When particles of dirt, debris and dust enter the aquafilter, they become wet, as a result, become heavier and settle at the bottom of the tank. After cleaning the room or furniture, the housewife simply pours in contaminated water, and all household members breathe clean air.

Let's watch a video about how the cyclone filter works:

Conclusions and useful video on the topic

Comparison of operating features of different types of vacuum cleaners, tips for choosing:

What you need to know about vacuum cleaners and the filters used in them, tips on filter maintenance and medical recommendations for choosing:

Having compared the given characteristics of aqua vacuum cleaners, which are leaders in the number of offers on the market, and having become familiar with the nuances of their use, everyone has the right to make a choice of the option that will become a reliable assistant for a long time.

Share with readers your experience of choosing and using a vacuum cleaner with an aqua filter. Tell us what unit you bought and whether you are satisfied with the performance of the cleaning equipment. Please leave comments and participate in discussions - the feedback form is located below.

Types of aqua filters

Although all vacuum cleaners with water filtration work on approximately the same principle, manufacturers produce three different types of water filters.

Hookah barsThey have the simplest design features. The sucked dirty air is passed through the water, as a result, not all small particles remain, but all large debris is absorbed. An additional filter can be installed to remove the finest dust. Hookah water filters must be periodically washed and thoroughly dried. Such filters do not have a very large capacity size
CyclonicThe poured water in this filter retains dust due to the turbulence formed. Cyclonic aquafilters use centrifugal force to trap debris, dirt and dust, as a result, all contaminants become wet and cannot return to the room along with the air. The cyclone type of filter does not allow the smallest particles of dust to be retained, which do not have time to get wet in the container, so they are released back into the room
SeparatorThese devices provide the highest quality cleaning, however, these models are the most expensive. After entering such an aquafilter, dust particles are separated from the air through powerful centrifugal action. Even the smallest particles remain, and the cleanest and freshest air is sent into the room

Precautionary measures

  • The device can only be connected to AC power. The voltage indicator must correspond to the data specified in the instructions.
  • Do not touch the plug or socket with wet hands.
  • Do not remove the plug from the socket by pulling the power cord.
  • Before starting cleaning, be sure to inspect the power cord and plug for damage; if found, repair or replace it immediately.
  • To prevent accidents caused by electricity, it is recommended to use outlets equipped with a device to prevent electric shock.
  • When cleaning, you need to take into account that mixing some substances with air leads to the formation of explosive mixtures and vapors. Under no circumstances should you suck in explosive flammable gases and liquids, reactive dust, strong undiluted alkaline acid liquids, or organic solvents. In addition to humans, these substances pose a danger to equipment itself, since they can lead to corrosion of structural materials.

How to choose a quality vacuum cleaner with an aqua filter

A good vacuum cleaner model will not be cheap.

When choosing an electrical appliance, experts advise following these recommendations:

  • select a device with a power of at least 300 watts; the body and all other elements of the vacuum cleaner must be made of durable materials;
  • You should not opt ​​for a model with a small water container, as you will have to replace the liquid frequently;
  • if long-pile carpets are to be cleaned, then the minimum power of the device should be 400 W, and if you plan to clean only smooth, non-textured surfaces, a power of 300 W is sufficient;
  • The less noise an electrical appliance makes, the better. The maximum volume should not exceed 65 decibels.
  • In addition, it is necessary to take into account the size of the home that will be cleaned. For a small apartment, you don’t need to buy a bulky device with a large tank. It is important to choose a vacuum cleaner with features that will actually be used.

    Rating of the best models

    There are many vacuum cleaners with an aqua filter on the market. German, Turkish, and Austrian brands are in demand among Russians.

    Thomas

    One of the leading positions is held by the German brand Thomas. All brand products are united by reliability and high build quality. Each model has individual disadvantages.

    Thomas TWIN T1 Aquafilter

    The TWIN T1 Aquafilter model is designed for dry and wet cleaning; you can remove liquid contaminants. The volume of the aqua filter is 4 liters. The length of the power cord is 6 meters. Power consumption is 1600 W.

    The device weighs 8.4 kg with a length of 48.3 cm, a width of 35.3 cm, and a height of 32.4 cm. The device comes with attachments for the floor, furniture, and carpet. The price is 12,000 - 13,000 rubles.

    Disadvantages of the model:

    • Large dimensions
    • Weight
    • The carpet nozzle gets clogged when cleaning long-pile floors
    • High price

    Thomas AQUA-BOX Compact

    The AQUA-BOX Compact model is intended for traditional dry cleaning only. Power is 1600 W. The length of the power cord is 6 meters. The volume of the aquafilter is 1.8 liters.

    The weight of the household appliance is 8 kg. Vacuum cleaner length - 46.7 cm, width - 31.8 cm, height - 29.4 cm. The set includes a furniture brush, a floor brush, and a crevice nozzle. Price from 13,000 to 15,000 rubles.

    The following features cause criticism:

    • Short wire
    • Glossy, easily soiled body
    • Small number of attachments included
    • The tall floor nozzle does not fit under low furniture
    • Difficulty in washing all parts of the aquafilter

    ARNICA

    Vacuum cleaners with an aqua filter are presented by the Turkish brand ARNICA. They are cheaper than their German counterparts, but are not without their drawbacks.

    ARNICA Damla Plus

    The ARNICA Damla Plus model is designed for traditional dry cleaning. The power consumption of the device is 2,400 W. The capacity of the water bowl is 2 liters. The length of the power cord is 4.6 meters.

    Dimensions are: 47X35X40 cm. The set includes flat nozzles for the floor, furniture, a round soft nozzle for curtains, sofas, fastenings for fixtures. The price starts from 6,550 rubles.

    Disadvantages of the model:

    • High noise level
    • Large dimensions
    • No automatic cord rewind
    • No minimum water level mark

    ARNICA Bora 5000

    The ARNICA Bora 5000 model is designed for general dry cleaning. There is a water pollution regulator. The power used is 2400 W. This model features automatic cord rewinding. The length of the power cable is 6 meters.

    The noise level is 79 dB.

    Dimensions of the device: length - 59 cm, width - 44 cm, height - 34 cm. The purchase kit includes: a turbo brush, a mini turbo brush for furniture, a nozzle for cleaning floors and furniture. The cost of ARNICA Bora 5000 starts from 12,585 rubles.

    Disadvantages of a Turkish vacuum cleaner:

    • Heavy weight: about 7 kg when the filter is full
    • Bulkier than a conventional fabric filter unit
    • Short cord
    • High noise level
    • Turbo brush clogs quickly

    VITEK

    Some of the most budget-friendly models of household appliances are the result of production by the Russian company VITEK. The models are distinguished by their low price compared to foreign analogues.

    VITEK VT-1833

    The VITEK VT-1833 vacuum cleaner with aqua filter is designed for dry cleaning. Power consumption is 1800 W. The volume of the water bowl is 3.5 liters. The length of the power cord is 5 m.

    The weight of the vacuum cleaner is 7.3 kg, the height of the device is 27.7 cm, the depth is 43.2 cm, the width is 32.2 cm. The price starts from 8,000 rubles.

    Disadvantages of the VT-1833 model:

    • Low suction power
    • Unreliability and fragility of parts
    • High noise level
    • The turbo brush gets clogged quickly

    Is a vacuum cleaner with an aqua filter already making your home cleaner?

    Of course! No, but it will be!

    Before choosing a vacuum cleaner with an aqua filter, you should think about its advantages and disadvantages. Electrical appliances are recommended for families with children or people with dust allergies. They perfectly clean surfaces of dust, but it will not come out of the device and will not settle again.

    But every time after cleaning, it is necessary to disassemble the household unit, rinse the water bowl, clean additional accessories, and dry them thoroughly to avoid the appearance of an unpleasant odor or mold. Vacuum cleaners are bulky and expensive

    How to make a water filter from a pan or bucket, work order

    You will need a saucepan or bucket with a capacity of up to ten liters. The container must be equipped with a lid that fits tightly to it. You can take a plastic bucket, for example, that contained putty or paint.

    In addition to the container, you will need two plastic or rubber pipes, a drill, clamps, a piece of fabric and glue.

    All this comes together as follows:

  • a hole is drilled in the lid of the container, the diameter of which is equal to the diameter of the tube;
  • a tube is inserted into this hole, a hose from an existing vacuum cleaner will be attached to it;
  • the joints of the tube and the container must be coated with glue on the outside to secure the structure;
  • Inside the container, the tube is covered with cloth and secured with a clamp. This fabric is necessary as a barrier that will reduce the amount of dirt and dust entering the vacuum cleaner;
  • a hole is cut on the side of the bucket for the second tube;
  • the tube is inserted into this hole and secured with glue. The hose of the vacuum cleaner, where the cleaning attachment is installed, will be attached to this tube.
  • When contaminated air enters the container from this tube, it will create turbulence through centrifugal force, and the dust will not be sucked into the vacuum cleaner, but will begin to linger in the water that is poured into the bucket.

    There should not be a lot of water in the container; its level must be kept below the level of the tube.

    Learn more about how to make a water filter for a vacuum cleaner with your own hands in the video:

    Non-standard approach

    Many modern users are concerned about the question of whether it is possible at all and like a regular vacuum cleaner to collect water, because an unsuccessful attempt can result in very serious problems with the device, ranging from a short circuit of the electronics to complete failure of the unit. However, some folk craftsmen approached the issue creatively and got used to using traditional equipment for this purpose.

    Before using a conventional vacuum cleaner, it is necessary to carefully study all system features and take into account potential dangers. Only a person who has certain knowledge in this field can convert a conventional unit to a water intake one.

    To work, you will need a container of the required volume (a plastic construction bucket or tank, a glass bottle, etc.), which is attached to the outside of the body of a conventional vacuum cleaner with special adapters, and you also need two sections of a hose (you can even use a simple garden hose). Both sections of the hose are secured on top of the container, and then one tube is connected to the original hose of the vacuum cleaner, while the suction hole is closed with any plug. And the second is needed directly for collecting water.

    The principle of operation is based on simple laws of physics: under the influence of rarefied air (almost a vacuum), which is created by the operation of the vacuum cleaner engine in the upper part of the tank, all the water is sucked in and collected at the bottom of the tank. It is convenient if the tank is transparent in order to monitor the volume and drain the liquid in a timely manner.

    Self-assembly of a device from scrap materials turns out to be several times cheaper than buying a professional powerful vacuum cleaner, but not everyone can make such a device on their own, and if you make the slightest mistake in the design, you can say goodbye to the equipment. This is why many users prefer not to skimp on a useful home appliance, especially if their plans include not only traditional dust collection, but also the collection of dirty water. A high-quality product will serve flawlessly for a long time, providing fresh air and comfortable living conditions in any unusual situations.

    Making an aqua filter from a pan and a plastic bottle, detailed instructions

    You will need a pan, for example, made of aluminum, and a bottle with a capacity of five to six liters so that it fits in the pan. You will also need a hose and several screws.

    Proceed according to the following scheme:

  • it is recommended to remove the bottom of the pan to reduce the weight of the device;
  • using self-tapping screws, the pan is attached by the handle to the vacuum cleaner at the air outlet;
  • Holes are shot in a plastic container, a liter of water is poured, after which the bottle is placed in the pan;
  • the first end of the tube is fixed to the vacuum cleaner, the second is lowered into the eggplant.
  • Water is poured into the pan, all the tubes are connected, and the lid is sealed. When the use of the vacuum cleaner is completed, the lid is removed, the dirty water is poured out, the container is cleaned and dried.

    Even more useful tips are in the video:

    Separator filter

    This filter will require a separator, a pump, a water tank, and a fan. All elements must match each other in size and height.

    This modification requires a person to have certain skills and technical training.

    It is difficult to assemble such a filter yourself, so the simpler and more affordable assembly options mentioned above are often chosen.

    So, water filters for vacuum cleaners have many undeniable advantages. In order not to purchase an expensive model, it is quite easy and quick to assemble a homemade aqua filter model.

    Every housewife or owner in the house has an unnecessary pan or bucket, and there are also several pieces of pipes or hoses. With a little time and little effort, you can create a water filter from these scrap materials.

    Noticed a mistake? Select it and press Ctrl+Enter to let us know.

    ← Previous post

    Next post →

    Rating
    ( 2 ratings, average 5 out of 5 )
    Did you like the article? Share with friends:
    For any suggestions regarding the site: [email protected]
    For any suggestions regarding the site: [email protected]
    Для любых предложений по сайту: [email protected]