Corner window - an attractive choice for the home. When should you choose corner windows? What are their advantages and disadvantages? How to choose the best? What does their installation look like? We present the most important information about corner windows.

The selection of window products is decisive. They are responsible not only for the penetration of natural light into the interior, but also must have the necessary properties to provide thermal insulation. Of course, the materials used are also important, as they must be strong, durable and easy to use.

What is a corner window?

A corner window is a type of window frame designed to be installed in the corner of a house. Thanks to it, more natural light penetrates into the interior. It also gives the premises an attractive modern look without the need for reinforced concrete structures. As a result, the house takes on a light, elegant look. To install a corner window, it is necessary to design it correctly, including from the point of view of strengthening the ceiling and structure. Therefore, the use of a window in the corner of the house should be considered at the stage of choosing or drawing up a project.

Corner windows for single-family homes can now be found in the inventory of many window millwork manufacturers. Usually they are made to order, after taking measurements. Thanks to this, they are ideally suited to the home in which they will be installed.

Style

The choice of shape and length of curtains depends on the design direction. Decorations on the windows are carried out in a single concept, otherwise the interior will look tasteless. In order for the curtains to blend harmoniously in the room, you need to choose the right style.

Classic

The design uses a combination of tulle curtains with curtains made of thick fabric. In the kitchen area you can hang Roman models, which in color and texture match the material of the living room. A symmetrical lambrequin and rope-shaped tie-backs will help to add a touch of luxury to your design.

Beautiful design with curtainsSource carpethouse.by

In a classic interior with access to a balcony, designers recommend using curtains without curtains. The beautiful flowing fabric is secured on the sides with bronze hooks. Austrian models will help hide the asymmetry of the window with the loggia door

The canvas gathered in scallops distracts attention from the irregular shape of the frame.

Provence

Short (to the window sill) curtains made from natural fabric are appropriate in the interior. Models with embroidery or floral prints (polka dots) look impressive. Roman curtains made of openwork material will add a romantic mood to the design of a kitchen-living room with a low ceiling.

Curtains with ruffles, frills or fringe will fit harmoniously into a Provence interior. Decorative clamps are appropriate for window decoration, allowing you to create beautiful folds on the curtains. There is no need to strive for strict symmetry in design.

High tech

They recognize the style by its clear lines and original shape. The interior often uses a game of contrasts, which is easily reproduced by thread curtains. Beautiful flowing models fit up to the floor in the living room, and up to the window sill in the work area. Asymmetry in window design can become a central design accent.

Modern interior of a living room with kitchenSource art-interior.moscow

In the high-tech style, curtains and drapes are often used. Transparent curtains are opposed by thick long curtains. Beauty is achieved through graphic folds on the cornice. Designs with an automatic sliding system will harmoniously fit into a modern interior.

How are corner windows arranged?

The design of corner windows depends on their type, but they contain the same elements that are used for the production of conventional wooden products - profile, frame, glazing, fittings. Window profiles in corner windows are placed along the periphery of the windows. Because corner windows must withstand heavy loads, they are constructed using stronger glass than conventional windows.

A window located in a corner is more susceptible to mechanical and thermal stress due to temperature changes, so they are made of tempered glass. Depending on the type of window, they can be either double or triple glazed. A variety of corner window options for a single-family home allow you to create a design that meets your individual needs.

Characteristics of corner windows

Corner windows have a special design due to their installation location. Both windows of standard height and windows with high glazing are used, that is, balcony and terrace windows. The variety of designs means that corner windows in a private home can be tailored exactly to the users' expectations. We can divide them into:

• materials from which they are made - PVC windows, wooden windows, aluminum windows, wood-aluminum windows,
• type of corner connection - corner profile, as well as connection with a step, i.e. gluing double-glazed windows in the corner with special glue,
• opening windows,
• number of double glazed windows,
• additional features such as sliding door design, burglary resistant windows, energy efficient and passive windows.

Requirements

They must meet all domestic standards for translucent structures: durability, heat protection, hydro- and noise insulation, dust protection and provide the functions of natural lighting and fresh ventilation.

Basic requirements for wooden panoramic portals:

1. 
   High strength and long service life of more than 40 years are ensured by the modern level of woodworking technology.

2. Environmentally friendly, wood is currently the most environmentally friendly material. It provides natural constant air exchange, protecting the premises from mold and creating a unique microclimate
3. Tightness is ensured by modern types of processing, the use of special insulation and sealants.
4. Maintainability, the design of the windows allows you to repair its individual sections, and components for repairs can be freely purchased in the retail chain.
5. Thermal and sound insulation of panoramic windows is ensured thanks to the installation of double-glazed windows: two-, three- and four-chamber.
6. Frost resistance, wood is a natural frost-resistant material with frost resistance of at least F50 and high resistance to temperature changes.

What materials are corner windows made from?

Various materials are used to produce corner windows, which also affects their properties and purchase price. Types of corner windows by material:

• PVC,
• wooden,
• aluminum,
• wood-aluminium.

PVC corner windows

This is the cheapest option. Made from multi-chamber plastic profiles. They are highly durable, resistant to external factors and do not require long-term maintenance. PVC windows can be used both in smaller formats and as large format windows - for large glazing. There are different colors to choose from.

Windows are standard white, but they can also be grey, black or wood-look. Among the disadvantages is difficult repairs. If the plastic profiles are scratched or otherwise damaged, the entire window will need to be replaced. In addition, lower quality products are more susceptible to warping, so it is important to choose joinery from a good manufacturer.

Wooden corner windows

Corner windows are also made from wood. This is a natural material that, after proper finishing, provides a number of advantages. Wooden windows have an elegant look. They are rigid and therefore suitable for large glazing. In case of local damage, wooden profiles can be repaired.

The disadvantages include the need for their systematic care, especially from the outside. Although windows come factory-sealed, wood deteriorates over time. It is mainly affected by UV radiation, precipitation, low and high temperatures. Every few years the wood should be protected with special means. When wooden frames are installed in a damp area, such as a bathroom, they must also be protected. Moreover, wooden windows are more expensive than PVC windows.

Aluminum corner windows

Another option is aluminum corner windows. In this case, the frame is made of metal - aluminum, which gives it certain properties. Modern aluminum windows are durable and do not require special maintenance. They are also lightweight and rigid, making them a good alternative to PVC and wood. The cost of aluminum windows is not inferior to wooden ones.

Wooden-aluminum corner windows

Wooden and aluminum corner windows are also available for sale. These are windows with a double structure - a wooden frame and an aluminum frame located on the outside. The wood visible from the inside gives the interior a cozy look, while the aluminum frame on the outside protects it from the harmful effects of weather conditions. This makes wooden-aluminum windows stronger and more durable, as well as less demanding to operate than wooden windows. Wood and aluminum joinery also have very good insulating properties. The main disadvantage is their high price.

Useful tips

Windows are always significant architectural elements of any room; when shaping the appearance of a space, they play a huge functional and aesthetic role.

Therefore, it is important that the curtains not only reliably protect the room from the sun’s UV rays and at the same time let in enough light, but also decorate it, making the interior brighter and more expressive

Heavy curtains are relevant in large living rooms and bedrooms; in small rooms it is better to give preference to light fabrics

Identical curtains

Large rooms with two or more window openings are rare, especially in multi-apartment residential buildings, and, as a rule, they are allocated as a living room or bedroom. If the room is spacious, usually each window opening is decorated with the same curtains, each of which is a separate finished textile composition, as a rule, these are curtains that protect from the bright sun and light from lanterns, allowing you to shade the room even during the day, and tulle that diffuses natural light

In this case, it does not matter whether the windows are located on one wall or on adjacent ones. The style and color palette of the curtain depends on the style of the interior

For minimalism and modern styles, these can be very simple curtains with eyelets or roller blinds, and for classic styles, multi-layered complex draperies made of heavy fabrics. In the bedroom it is better to use materials with a blackout function, and in the living room give preference to expensive fabrics that will elevate and transform the interior.

In this case, special attention should be paid to the height of the ceiling and the color of the walls in the living room and bedroom. In low rooms, it is recommended to give preference to curtains without lambrequins, and raise them as close to the ceiling as possible; you should also refrain from textiles that contrast with the main decoration

If you decide to make the window decor an accent in the living room or bedroom, it is better if the textiles have a vertical pattern, and it must be consistent in color or texture with other interior elements, for example, with accessories or furniture upholstery.

Heavy curtains are relevant in large living rooms and bedrooms; in small rooms it is better to give preference to light fabrics

Mirror reflection

In rooms with two or more window openings, curtains made in a mirror image of each other look very beautiful and original. This composition combines the windows into a coherent ensemble and is a strong technique in shaping the proportions of the room. Mirrored curtains visually significantly expand the boundaries of space, the walls seem wider. This technique is a very significant help in the design of high and narrow openings; with the help of such a design trick, the geometry of the space changes.

Mirror hanging curtains has three designs:

Three canvases are hung on two windows - one on each edge and one in the wall; light tulle is hung between them, as shown in the photo example below. This design is relevant if the window openings are located very close to each other, the partition is very narrow or absent altogether.

Heavy curtains are relevant in large living rooms and bedrooms; in small rooms it is better to give preference to light fabrics

If the room is small or elongated, and the wall on which the openings are located is narrow, it is better to hang tulle between the side panels and do without a central curtain altogether.

Transparent tulle is appropriate in the living room, but it is recommended to choose more functional curtains for the bedroom

The openings are decorated with asymmetrical curtains; in this case, part of the wall between the windows remains free, where you can place a clock or a framed photo.

Asymmetrical mirror curtains beautifully highlight the partition between the openings

All of the above techniques are successfully used to design window openings located both on one wall and on adjacent ones.

Note that in the bedroom it is important that the functional canvas completely covers the window from light, so it should move easily along the cornice. Often, asymmetrical mirrored curtain styles do not have this option, so they are more suitable for the living room, and in the bedroom they can be used in combination with modern functional blinds or with roller blinds that almost completely block light from entering the room

Don't be afraid to combine classic curtains with blinds

Corner windows - types of corners

The corner in corner windows can be made using various technologies. This affects the appearance of the window, as well as its thermal insulation parameters.

Corner profile

This is the cheapest option among corner windows. They are equipped with a special profile - which is placed in the corner. Corner windows with a mullion are aesthetically pleasing, but the use of such an element can obstruct the view. Therefore, if you want a beautiful view without being limited, the solution may be to buy a window without profiles.

A corner window with a stand, in addition to its low price, has additional advantages. They also have better thermal insulation parameters and do not limit heat loss,

Corner windows with gluing

The second option is windows with a step, that is, with glued glazing. Otherwise, they are also called columnless windows or laminated corner windows. The step, that is, the connection between the glasses, is made by putting one glass unit on another. Then the free space is filled with special spacer cables and additionally sealed with special glue with increased mechanical strength.

For an aesthetic effect, silicone or ceramic enamel is used, placed along the edges of the glass. Corner windows with gluing allow much more natural light into the interior and give an attractive aesthetic effect. The lack of a wide profile means that nothing obscures your eyes when you look out the window. However, it is worth remembering that in this case it is impossible to open and close the window. In addition, they have reduced thermal insulation compared to corner profile windows. They should also be custom designed when the house is exposed to strong winds. Then it is important to use reinforced glass construction to reduce the risk of damage.

Ways to enhance energy efficiency

Systems without an impost have lower thermal insulation parameters than window structures with an impost. Indeed, in systems with a corner element, thermal insulation is structurally supported.

And with glazing without an impost, only seals retain heat. By the way, in very large structures with an impost, there are thermal inserts in the profiles of the system connectors to enhance energy saving.

Corner window structures with system connectors are sometimes installed in the thermal insulation layer of the wall. This installation technology increases energy-saving properties.

Note! The highest thermal characteristics will be achieved by constructing a walled corner element and its subsequent insulation with insulating materials. Although the window will acquire a visual effect of monumentality instead of lightness.

If you prefer warmth and aesthetics, then it is better to choose a blind corner device without an impost. It will provide the most effective standard thermal insulation - fixed glazing.

Glass connection in corner windows

In the case of stepped (glued) windows, the connection is made at a right angle, that is, 90 degrees. However, when a corner window is mounted using pillars - profiles, the connections can be made at a different angle. A corner window equipped with a profile can be connected at an angle of up to 210 degrees, which allows you to create various designs. You can also use them to create other designs suitable for your home. The manufacturer will then create an appropriate design that takes into account architectural features.

Where should corner windows be used?

Corner windows have a wide range of uses—they can be used in almost any single-family home. They primarily perform a decorative function, but also have a practical application - they illuminate the interior. Corner windows, as well as corner verandas and balcony doors will show themselves in any room. They are used in particular in living rooms, bedrooms, kitchens and kitchenettes and even bathrooms. They can look attractive in any room located in the corner of the house. Of course, when deciding where to install a corner window, consider the views facing the outside. Therefore, you should not decide to install such carpentry when the panorama is not very attractive, for example, it will lead to other buildings or an alley.

It is worth noting that windows in the corner can be used in both energy-efficient and passive houses. Typically, then, models with a profile are used, since they are characterized by an increased level of thermal insulation and therefore prevent excessive heat loss. To prevent large glazing from causing a significant deterioration in the thermal insulation parameters of the house, it should be installed on the south or east side. Then it will provide a lot of daylight and at the same time heat, which will naturally warm the house. To make the effect of such passive insulation even better, special low-emissivity coatings are used on the glass. A window with such a coating allows heat to enter the room, but prevents unnecessary heat loss.

Curtains on the bay window

A bay window is a part of a room placed beyond the plane of the facade. Has a window with a curved or multifaceted shape. Thanks to the variety of cornices designed for bay windows, you can use different types of drapes and curtains.

The basis for choosing curtains for a room with a bay window is the desired degree of shading and compatibility with the interior of the room.

An interesting option is to decorate each part of the bay window with a separate fabric. Visually this makes him taller. This is recommended when the bay window has several windows separated by narrow strips of wall.

kitchen bay window curtains 2

The central window and side windows can be made in different styles. The one located in the center can have the usual solution, and the side window openings located at an angle to it can have drapery.

If the bay window has a semicircular shape, then sliding curtains can act as a common curtain. It is also possible to use lifting curtains. It is appropriate to use a lambrequin - a horizontal strip of fabric at the top.

In any case, such an interesting detail as a bay window should not have a simple solution. Don't miss the opportunity to make your interior more attractive.

Modern and classic corner windows

Thanks to their modern look, they are used in modern homes. However, they also look great as glazing in houses with classical architecture. Modern spaces are most often complemented by large glazing, which allows a large amount of natural sunlight inside and opens up a beautiful panorama outside.

In the case of classical buildings, they often take the form of a span, that is, a fragment protruding from a façade equipped with windows. In a bay window, you can use corner windows connected at an angle of 90 degrees or at an obtuse angle. Also popular are windows with muntin bars, that is, slats placed on glass, which give woodwork a classic country house look. The corner window can also have different colors, which further allows it to be adapted to the interior design. Currently, windows with black and gray profiles are very popular,

This category also includes corner terraces and balcony doors. They are taller and can be used as a transition to the garden, terrace and balcony. Terrace and balcony doors with an angled design are often used as part of larger glazing, creating the effect of a glass wall. They allow much more natural light into the interior.

Nuances of studio design

Any ideas for a small studio apartment are subject to the following rules:

1. The room is not cluttered - this applies to furniture and the number of decorative items. Often the room is designed in an urban style, high-tech, minimalism;
2. Zoning is best done using furniture - a bar counter, a rack, a cabinet, a sofa;
3. Furniture is not placed around the perimeter - this marks the boundaries of the room, which means that the visual effect will manifest itself in a reduction in size;
4. If there is a closet in the apartment, then it should be made high and narrow;
5. Light finishing materials are used - beige, milky, white colors are combined with other colors;
6. Spotlights are installed - the design of a studio apartment does not accept a classic chandelier or floor lamps, which eat up precious space;
7. Maximum rejection of dark wood with the use of glass, plastic, metal;
8. Curtains for a studio apartment are made from lightweight materials, and you can choose a complete set - curtains or blinds with tulle or muslin.

Related article: What wallpaper is suitable for dark furniture

Advantages and disadvantages of corner windows

Currently, interest in corner windows is constantly growing. They are readily installed in new single-family houses, especially with modern architecture. Thus, the use of large glazing allows you to create a stylish effect of panoramic walls with views of the surrounding area.

Advantages of corner windows:

• let a lot of natural light into the interior - the larger the glazing, the better the lighting effect,
• give the house an attractive appearance - increase its elegance and prestige,
• They go well with many rooms - they can be installed in living rooms, bedrooms, bathrooms,
• they give the effect of optically enlarging rooms - even with a smaller area,
• good for installation on every floor,
• they fit into various architectural styles - they are most often chosen for modern houses, but they are also found in classic ones, for example, as decorative bay windows,
• they can be equipped with doors - they allow easy access to the garden, balcony or terrace,
• Available in many variants - they can be individually adapted to your home and to your taste.

Disadvantages of corner windows:

• longer wait for carpentry products - made to order,
• higher costs - you will have to pay more for corner windows in the house than for regular window frames,
• require proper design of the house - the project must include corner joinery, including loads, lintels,
• professional installation is required - corner windows must be installed by a qualified team, especially for glued windows,
• they can reduce the thermal insulation parameters of the house - this mainly applies to corner windows with a glued construction, i.e. with a step,
• Greater susceptibility to wind pressure is the reason why these windows must be further strengthened in certain areas.

pros

Usually, when designing a corner apartment, an additional battery is included in the project. Thanks to it, moisture and fungus should not appear on the walls. If suddenly it is not there, you should definitely connect the radiator yourself. In no case should you remove the battery on walls that face the street, since due to low temperature and high humidity, dampness will appear on them over time. It quickly passes through the wallpaper and this phenomenon not only looks unaesthetic, but is also extremely dangerous to health.

The radiators provide heat to the walls, the main thing is that they are properly connected and washed annually to ensure unhindered circulation of hot water. To completely get rid of possible mold, you should insulate the wall, but it is best to entrust this task to specialists. Two radiators in the room are very beneficial, since in winter there will always be a place to dry clothes.

End rooms usually have two windows, which has many advantages. You can look at the street from different sides, then choose your favorite view from the window, sit near it and drink tea. A corner room with two windows always has excellent natural light, which allows you to save on electricity. Seeing the sun in the morning is a great reason to lift your spirits, and watching the sunset from the window is very romantic. The presence of windows on two external walls allows you to keep an eye on a car parked nearby; you can place it on any side and be sure that no one will touch it.

Two windows in a corner room are a great way to ventilate without using air conditioning or air purification. At any time of the year, winter or summer, such ventilation will help ensure air circulation, saturating it with the necessary moisture and oxygen. It is especially good to ventilate a room if its windows are located perpendicular to each other.

The obvious advantage of living in a corner apartment is that there are fewer shared walls with neighbors, which means less to worry about. Everyone knows perfectly well what it’s like to have neighbors behind the wall who can make noise, play music at night or watch loud TV. Otherwise, the only ones who will be a source of noise will be the neighbors above.

There will be no problems with the subsequent sale; the main thing is to describe all the advantages of the apartment. and when purchasing, the obvious advantage will be that it will be much cheaper than other apartments, and nothing makes you happier than a profitable purchase of real estate.

How much do corner windows cost?

Prices associated with purchasing corner windows vary because many factors influence the cost of producing them. However, they are more expensive than regular windows, which should be taken into account when choosing a home design. Typically, the price of a smaller corner window starts at about 20,000 rubles.

The cheapest option is to buy a corner window with a profile connecting the glass in the corner. The price for this type of joinery is usually 30-40% lower than for corner laminated windows. You'll also pay less for windows that are fixed, meaning they can't be opened. You also need to consider the additional costs of windows with custom colors. When planning corner glazing, it is also worth remembering that the price is greatly influenced by the quality of the joinery. You will have to pay up to 50% more for corner windows from the best manufacturer than for windows from another manufacturer. The cost of windows varies individually, so it is best to contact several companies involved in their implementation. Depending on the size and arrangements, the worker will be able to provide a price for the carpentry.

Stereotype No. 4. Panoramic glazing is unsafe

Transparent structures that visually blur the boundaries of the house with the outside world seem vulnerable to penetration by strangers. Whatever one may say, glass is not concrete; you throw a brick at it, and it crumbles. This worries many homeowners who dream of sliding glass walls.

NikasanForumHouse Member

How might thieves act? I went up to the fence, threw a stone, glass fell out, go in and take what you want. And if the glass doesn’t break, then there’s no point in walking around and throwing things at all the windows.

In fact, there is no reason for such concern: as our expert says, in panoramic glazing it is possible to use special glasses that are indestructible under such influence.

And a whole range of additional measures can enhance protection:

• triplex;
• film;
• roller shutters;
• alarm system (with stickers on the fence indicating that the house is guarded).

AntonShar Member FORUMHOUSE

I have a hardened eight and the film is in place; during installation I personally threw a brick and it holds fine. But I did this only to protect myself from the small ones, he usually walks around with a hammer, but I would have made do with triplex.

More about the strength of such glass: a member of our portal with the nickname Apn8 jumped, as if on a trampoline, on a “tempered ten” measuring 2400X1200, placed at the corners on bricks.

Apn81FORUMHOUSE Member

I jumped to the ceiling, the glass bent, but did not break.

The majority of FORUMHOUSE participants who have chosen panoramic glazing consider such expensive solutions to be redundant, since in fact large-format structures are no more attractive to intruders than ordinary small windows.

GagsuvForumHouse Member

I think few people would break a huge panoramic double-glazed window for the sake of theft.

Usually FORUMHOUSE limits itself to triplex to protect large structures.

SegamegaFORUMHOUSE Member

To cut a hole in the triplex 44.2 large enough to enter the house, you need to diligently swing an ax for about 10 minutes. During this time, the police will even have time to arrive on skis.

How to choose the right corner window?

Corner window frames are available in various options. Before placing an order for its implementation, it is worth taking time to familiarize yourself with the manufacturers' proposals. Currently, offers are available on manufacturers' websites, but it is best to schedule an appointment with a representative to get professional advice on choosing the right wood products and get a quick quote. When choosing a corner window, consider the following:

• adapting the window to the design of the house and the appearance of the interior,
• window size - large glazing is more efficient and illuminates the interior better, but is associated with a higher purchase price,
• materials from which the windows were made, which affects their properties and operation,
• a method of opening a window, for example, a tilting, sliding window - windows can also be purchased in a cheaper version without closing, i.e. fixed,
• The level of insulation of windows, which is expressed by the heat transfer coefficient, depends, in particular, on the materials used, the number of glasses in the package,
• additional properties of corner windows in a private house,
• warranty for corner windows.

Based on these parameters, you can choose a corner window for your home, which will become an effective addition to the living room, bedroom or other interior. If you have problems making a decision, you should also consult with a specialist - he will advise which design solutions are suitable in a particular case.

Varieties

There are three main types of such blocks:

1. classic;
2. bay windows;
3. corner;

Let's take a closer look.

Classic

Panoramic windows are the most popular type in modern architecture, suitable for most standard buildings. They are installed strictly in a straight line from ceiling to ceiling.

The advantages of classic panoramic designs are:

1. Easy to install.
2. Easy to clean.
3. Maintainability.
4. High variability of design solutions.

According to users and experts, this type has no disadvantages.

Bay windows

The bay window type of panoramic glazing is quite rare; it is used when installed on semicircular protrusions on the outside, called bay windows. With this type of glazing, double-glazed windows are installed at a special angle, the size of which is related to the radius of the semicircle and the interval between the outer boundaries.

Advantages of this glazing:

1. Maintainability.
2. Small dimensions and weight of individual structures.
3. Can be performed both blind and opening.

Disadvantages include complicated installation and difficult cleaning of external windows.

Corner

Corner designs increase visibility to 270 degrees, which cannot be achieved in the other two types. This type is average between the two above in terms of complexity of installation, maintenance and repair.

Subtypes of corner glazing are:

1. When making a transparent corner, when double-glazed windows are closely joined, the joint corner is sealed with colorless sealant.
2. The window frames form a corner joint. This option is easier to install because it does not require the use of specialized profile systems.
3. The corner is formed by a load-bearing wall or column. More reliable design, but less attractive from a viewing point of view.

All types of panoramic windows are grouped according to the type of opening into the following designs: parallel-sliding PSK, folding FS and lift-sliding HS and false windows. In addition, such wooden portals can additionally be equipped with a folding mechanical device and valves for air ventilation.