Ways to properly tint windows, types of films and care for them. Solar control film for windows: advantages and disadvantages

A plastic window can be decorated with rich classic curtains, modern roller shutters or blinds, exotic Japanese curtains, unobtrusive string curtains or a combination of these accessories. However, modern windows are so good in themselves that many refuse any decorations. As practice shows, this is not always comfortable, especially if the windows overlook the façade of a neighboring house and actually allow its inhabitants to look into your home. The OKNA MEDIA portal will tell you what window solutions are available on the market to shield yourself from prying eyes.

Today there are many interesting solutions for window “self-defense” from nosy neighbors. However, when trying to protect yourself from prying eyes, you should not forget about aesthetics, because window accessories are a very interesting element of interior decor.

The effect of one-way visibility can also be achieved through decorative glass lamination, sandblasting or the use of a double-glazed window with a variable level of transparency.

Solar film on windows as one of the effective methods of combating indoor heat

Every year modern manufacturers develop new technologies that allow them to achieve maximum comfort and improve the quality of life. Solar control film on windows helps solve one of the most common problems, such as heat in the home. Tinting has become widespread due to the low cost of both material and installation. By gluing the film, you can reliably protect the room from excessive sunlight and ultraviolet radiation.

Using window tint film is an inexpensive but highly effective method of sun protection.

Means of window “self-defense” from curious neighbors

The effect of one-way visibility can also be achieved through decorative glass lamination, sandblasting or the use of a double-glazed window with a variable level of transparency.

What is solar window film made of, what functions does it perform?

In the summer, in a metropolis, the constant heat turns an apartment or house into a real steam room. Therefore, most residents are wondering how to protect the premises from the penetration of sunlight and reduce the temperature in the home. Despite the fact that reflective film on windows from the sun was first used specifically to protect a car, recently it can be increasingly found on apartment windows. The material became widespread due to the large number of advantages that car lovers identified for themselves.

In the manufacture of tint film, polyester is used, which significantly improves the strength and elastic characteristics of the material.

Today, solar protective films for windows are used not only in residential premises, but also in office buildings, shopping and entertainment centers, which have a large glazing area. The main advantage of use is that without losing the transparency of the window, it is possible to significantly increase the comfort and convenience of living or staying in the room. Another advantage is improving the appearance of the home and giving it a more modern look.

The main substance from which solar protective film is produced is polyester, and the specific properties are achieved through the application of a thin metal layer. The main materials here are:

aluminum;
titanium;
nickel;
bronze;
silver.

On a note! As a rule, manufacturers recommend gluing reflective film to windows with the metal side. This method of gluing will simplify the dismantling of the material.

Using the decorative function of covering the film, you can create a special shaded atmosphere in the room.

Many people want to use film painted in a certain color. Such a product will consist not of two, but of three layers. The third layer will be a material that is applied under production conditions using a laminator. This technology ensures longer color retention, and the additional layer will provide better sun protection.

Modern manufacturers have made it possible to solve several problems with the help of reflective materials: some glue film to windows so that what is happening in the room from the street cannot be seen, and others purely to protect the home from the penetration of solar flow. The simplest product options can only provide room protection from the sun, while more expensive branded products prevent the penetration of ultraviolet radiation into the room, thereby preserving the surfaces of furniture and household appliances from fading and loss of color.

It is with the help of the decorative function of the coating that it will be possible to create a special shaded atmosphere, give the room coziness and, if necessary, fill it with the desired color scheme. Decorative film can be used to decorate both the facade and interior design of a room, when it is necessary to highlight or, conversely, emphasize the style of the room.

The metallized layer acts as a kind of screen for solar radiation.

Pleated blinds: a tribute to fashion

The classic design of strips of fabric connected by a lifting mechanism, in this version is complemented by a day-night function, which allows you to make the shading more or less dense. This design is made from two types of fabric, one of which is translucent.

The model is attractive due to its versatility of use, and its external resemblance to horizontal blinds inspires consumer confidence. They can be used to decorate a bedroom or a nursery.

Benefits you can get by installing solar control film on your window

The wide popularity of solar reflective films for windows can be explained by the large number of benefits that the user receives as a result of its use. Let's consider the main advantages of using such products.

The ability to transmit visible light, but at the same time block infrared radiation and ultraviolet radiation. All modern window tinting films work this way, although earlier versions of the materials simply darkened the windows, but did not prevent overheating. The latest technology is designed in such a way that the sticker does not absorb visible light, but the temperature in the room can be reduced in some cases by 10 degrees.

Preservation of heat during the cold season. Sun protection for windows helps to retain about 50% of the heat in the room, which indicates sufficient energy-saving properties. The principle of providing this advantage is as follows: the material from which the film is made repels infrared rays in the direction from which they come. Therefore, the heat generated in the apartment does not escape through the windows, which is especially important for houses with panoramic windows or apartments with a large glazing area.

Window tint film can reduce infrared radiation by up to 80%.

Creating a mirror layer that does not allow prying eyes to observe what is happening in the room. This property is useful for both residential and commercial premises located on the ground floors or near other buildings. In addition, the interior, thanks to the mirror tint film, is reliably protected from optical-visual surveillance devices.

Additional security. If for some reason the integrity of the window is damaged, the glass will not crumble into small fragments, but will be fixed on the glued protective film. This will avoid injuries and cuts.

We recommend: How to insulate a garage door with your own hands from the inside - with polystyrene foam, penoplex and other materials

Note! Despite the fact that a window with film does not crumble into small pieces, it is still quite easy to break it from inside the apartment, which is required by fire safety standards. This is because if there is a fire in the house, windows may be the only way to escape safely.

The unique film manufacturing technology allows us to minimize the amount of incoming solar energy without significant loss of optical visibility.

We arrange access to a terrace or balcony

As mentioned above, doors to the terrace often have a very large glazing area. Some have only a frame made of wood, metal or plastic, the rest is glass. And not everyone has it mirrored or tinted. In this case, to maintain privacy, the glass must be covered with something. Usually this is one of the types of curtains.

Folds, folds, folds - this is what you often see at the doors to the terrace

Blackout fabrics will come in handy, although this is not necessary. Simply with their help you can make it “almost night” even during a bright day. What are the features? Here, of course, you can organize tiebacks (on racks/beams in the glazing), but more often they simply make free-falling large folds that move to the side. And their height is from floor to ceiling. And no lambrequins or other pomp, unless the style of the room requires it.

As an alternative to folds, you can consider Japanese curtains. There are no coattails here, just a flat canvas.

Japanese curtains on the terrace door: a more modern and stylish option

Japanese curtains require special guides that are attached to the ceiling. The canvases move along these guides. A metal or wooden rod is sewn into the lower part of the panels, which prevents the formation of folds. Here, in fact, is the entire device. These curtains have a more formal look and are suitable for modern, laconic designs.

Positive qualities of window tint film highlighted by most users

In addition to the practical side of using solar films on windows in an apartment, one can also highlight the aesthetic component. This includes the ability to choose the optimal color of glass, which will be an excellent addition to the exterior and interior. Thanks to a large selection of shades (from silver to soft purple, blue or gold), you can choose the best option that matches the color of the roof or walls of the building.

According to reviews, sun-protection films for windows have the advantage of being able to protect expensive curtains from fading, because even high-quality textiles can lose color under constant sunlight. Thanks to the wide temperature range (from -40 to +80 °C) at which it is permissible to use the film, both textiles and furniture will have their original appearance for a long period.

If you take into account the fact that the coating protects the windows from the sun, which causes an increase in the temperature in the room, you will be able to save a little on the electricity that is spent on air conditioning. There is also the possibility of purchasing a device of lower power and operating it in energy-saving mode. The cost savings will be especially noticeable if you apply the film in an apartment or cottage with large windows or in a spacious retail or office space.

The tint film allows you to avoid possible overheating of the room in hot weather.

Most users consider the possibility of simple, self-installation to be another important advantage of solar glass film. The material can be applied to already installed windows. There is no need to remove glass, unscrew frames or purchase special tools. All that needs to be done before work is to thoroughly wash the windows with soapy water, removing excess moisture with a slime, and let them dry thoroughly. The entire installation process is unlikely to take more than a few hours. If you don’t have confidence in your own abilities, it is better to invite a specialist to do the work, which will avoid damage to the material.

Other advantages of solar control films for windows and some disadvantages

In addition to the advantages listed above, using glass film will help prevent glass fogging, which affects the appearance of the entire room, especially if there are no curtains on the windows. This is true in apartments where “crying windows” are observed in winter. An additional protective layer will prevent the glass from freezing, which is why condensation forms on the inner surface of the window.

Note! Few people know that after gluing a protective layer on the glass, the harmful effects on the eyes resulting from too bright lighting are reduced. This will keep your vision normal for longer. You will also be able to use computer equipment and watch TV with greater comfort, because rays will not hit the screen.

Poorly applied or low-quality film can peel off from the glass unit.

As you can see, the coating has a large number of positive qualities, the main one of which can be considered to be the protection of the room from overheating.

But before buying, you should familiarize yourself with the main disadvantages, such as:

Fragility of the material. The surface of the film is thin, which is why it is quite easy to damage, especially if you are not careful during installation.
Excessive stickiness. In some cases, the self-adhesive film on glass may stick so strongly that it cannot be torn off even with the use of heating devices.
Excessive darkness on cloudy days. Due to the fact that the coating blocks some of the light, you will most likely have to use lighting items more often, especially if it is cloudy or dark outside.

In general, the service life reaches 7-10 years. Here everything depends not only on the installation technology, but also on the quality of the purchased products. A poorly glued or low-quality film can peel off or has an insufficient light-repellent effect.

Curtains for an interior arch

Doors are not placed in some openings, but the portal itself remains. It can have sharp corners or rounded at the top. The shape of the opening has little effect on the choice of curtains. It's more about the overall style of the interior. When are curtains needed? If we see two openings of different sizes, heights or shapes (photo below right). In this case, we remove the dissonance.

Curtains are usually used instead of interior doors if privacy for the room is not very important

Zoning is also emphasized with the help of curtains. Modern interiors are increasingly being designed as a single space. In this case, the demarcation makes the room more “homey”. Not everyone likes to live in a “theater” - coziness and adding draperies in the doorway.

Thick curtains between rooms will muffle sounds a little. Curtains, of course, cannot replace doors, but they cannot be compared in terms of installation complexity and price. In addition, doors are not always easy to install. If the door portal starts immediately from the wall, you will struggle with installing the door. This is a general problem with arches - besides the fact that the doors will be made to order at a special price, the installation will also cost a pretty penny.

The whole difficulty is to figure out what the curtains will look like

The photo above shows different types of draperies on arches. What should you consider when choosing the type of drapery? Of course, the height and width of the arched opening. The option on the left - with pompous drapery - is suitable only for very high ceilings. At a standard height, you won’t be able to arrange the folds this way. The option on the right is more suitable for low openings. And the cent is interesting because the opposite folds are sewn. But this is only for those curtains that are stationary and cannot move along the cornice. You shouldn’t do curtains between rooms like this - it’s very impractical - you need to move the fabric back every time. But you can completely cover the entrance to the dressing room.

How to choose a film

First of all, you should not take products from cheap Chinese bush producers. The difference in cost with the original products will not be critical (taking into account that the work will be completed a decade in advance), but you will definitely be disappointed in the quality (dismantling will also reveal all the delights of “savings”).

The following brands can be called well-proven:

SOLUX (Singapore)
"Armolan" (USA)
"Ultra Vision" (USA)
"Professional Window Film" (South Korea)

In addition, tinting can not only prevent the penetration of sunlight, but also protect from prying eyes (mirror film), mechanical damage (shockproof), decorate the interior, fitting the window into the interior space in an interesting way. Let's look at each type of tinting.

Sun protection film

Designed for darkening glass. By preventing the penetration of ultraviolet rays, it protects furniture, wall coverings, and indoor plants. After tinting, there is a noticeable decrease in temperature on the balcony or loggia on hot days.

Used for tinting office windows and apartment balconies.

Protective film

This tinting has many advantages:

does not allow sunlight to pass through
adds strength to the glass (of course, it can be broken if desired, but not as easily as if it were without protection)
prevents fragments from falling if the glass does break
can contain the spread of fire for a certain period of time
suppresses external noise, preventing the glass from resonating

Mirror film

The outer surface is mirrored, and the inner surface is simply darkened. For apartments on the first floors, this is an ideal combination - from the outside the room will no longer be an object of curiosity, and from the side of the room nothing will interfere with the view. But in the evening, the tinting will still be transparent, so you will still have to take care of blinds or curtains.

We recommend: Do-it-yourself highly efficient solar collector

Decorative film

Such tinting will be more of an alternative to blinds; it does not have a sun protection or mirror effect, so it will not save you from heat penetration. But it will cope with the shading of the room perfectly.

There are a large number of different options for decorative films on the market, these include graphic abstract designs and entire compositions where the design begins on one sash of the window and continues on to the next.

Architectural film

This tinting is multi-layered; it is not just a reflector, but a whole system of layers, each of which has its own function. Architectural or spatter tinting can be colorless or painted in any color (bronze, green, light blue, etc.).

Architectural tinting allows visible light to pass through while reflecting infrared rays. That is, in summer it does not let heat in, and in winter out. This tinting will make the glass durable and impact resistant.

Each category has its own color shades and coating densities. There are several types according to the degree of painting:

Non reflective (NR). These are deeply colored films.
High Performance (HP). Tinting with spraying effect (metal imitation).
Gradient (GRD). Films with the presence of the effect of transition from one color to another.

How practical is this?

There are two options for using curtains for a door. The first option is that they serve as an addition: the doorway has both a door leaf (or doors) and curtains. Why do you need curtains in this case? For comfort, to make the atmosphere more intimate, to block the light, if the doors are glass, to reduce the penetration of noise. At the entrance to a private house or from the balcony - to reduce the number of insects, so that passersby look into the windows less. There are many more reasons, including “because I want it or like it.”

Doors cannot always be without curtains

The second option is when there are only curtains and no door itself. In this case, it is more a delimitation of space, although all other reasons are also present.

We weigh the pros and cons

As for the practicality of using door curtains, everyone decides for themselves. Here are a couple of notes so you can decide whether this is right for you.

The main advantages of curtains in a doorway are aesthetics, low price, and the ability to quickly replace them. By changing textiles and accessories, it is easy to change not just the color scheme, but even, to some extent, the style of the room.

Methods for tinting plastic windows

Classic or roller-type solar curtains are an excellent option if you want to protect your bedroom from the scorching rays of the sun. Unlike self-adhesive coatings, such products can be removed in cloudy weather, when the heavenly body does not penetrate the house with its rays.

Film tinting coatings are well suited for plastic windows in the attic or balcony.

They are often installed directly at the factory, and when purchasing double-glazed windows, you have the opportunity to choose the best solar protection option for your apartment.

If the window is already installed and needs to be darkened, this can be done in two ways: with your own hands or with the help of professional workers. The second option is the simplest, but more expensive. Therefore, it is worth considering the first method.

To darken windows from the sun with your own hands, you will need to stock up on the following devices and materials:

Directly, the sun protection coating itself.
Stationery knife.
Rubber spatula.
Spray bottle with a supply of soapy water.
Ruler.

Before darkening the windows on the balcony, some craftsmen advise taking the glass out to make the task easier. This method can lead to depressurization of double-glazed windows and damage to plastic windows.

But in any case, before starting work, you need to clean the glass surface from dirt and fine dust, and then degrease it with any detergent. This will help darken the windows in the apartment better. Once the glass is completely dry, you can begin the pasting procedure.

Cornices for doorways

To decorate a doorway without a door with curtains, use ordinary cornices. There are no special features here. Just select the length of the crossbar and the type of cornice itself. It does not have to be tubular, but these are the ones that are used most often.

The simplest, most popular and inexpensive solution is tubular cornices

Movable curtain rods for door curtains are the most functional

For French doors with large glazing, there are short curtain holders. They are mounted directly on the sash above the glass. They are only a few centimeters away from the door leaf. The bad thing is that you can’t make large folds here, only small gathering.

Classic and Magnetic Curtain Holders for French Doors (Large Glass)

Source

The process of applying the sun protection layer

Further actions will not cause difficulties if you are careful during the entire procession. The tinting coating is applied to the glass surface in several steps:

Window tint film is sold rolled up, so it must be properly straightened by rolling it out on a flat table. Also, if the size of the coating greatly exceeds the length and width of the glass unit, you need to cut the tinting layer so that at the edges it is half a centimeter wider than the window opening;
Then the glass is moistened with soapy water from a previously prepared spray bottle. This is necessary in order to prevent spontaneous adhesion of the film to the window;
The protective layer is removed from the darkening coating. The adhesive side is also wetted with soapy water;
Now that the glass and film are reliably protected from unwanted sticking to each other, you can carefully align their upper edges. Then, using a rubber spatula, the darkening layer is smoothed from top to bottom;
To darken balcony windows efficiently and for a long time, it is necessary to remove soapy water from the gap between the glass and the protective layer. This is done simply - with the same spatula, starting from the center;
Lastly, the protruding edges of the film coating are trimmed. During this process, care must be taken not to cut off excess, otherwise gaps may form. But you shouldn’t leave protruding edges either. This affects the final result of the work.

The result should be beautiful plastic windows with tinted glass.

When applied in accordance with all the rules, the tinting coating prevents excess light from entering the room, stopping the process of fading of objects in the home. This is a very useful property, since dark leather furniture is vulnerable to solar radiation.

Even darkened plastic windows prevent the room from getting too hot in the summer and make watching TV more comfortable due to the lack of glare on the screen. The only disadvantage of film coating is that the room darkens earlier than usual. So, before darkening your windows from the sun, you should weigh the pros and cons.

Aluminium foil

Foil, which everyone is used to using in the kitchen, can also be used to cover windows. If you place it with its shiny side facing the street, it will not only protect you from those who want to look into someone else’s apartment, but will also significantly reduce the heating of the air in the room during the warm season.

Consider the fact that the foil is completely opaque. It does not let sunlight into the room, so it should only be used on old-style windows, covering the lower (high) glass and leaving the upper (small) glass transparent. However, even in this case, semi-darkness will reign in the room.

Advantages	Flaws
• Availability - This material is sold in all supermarkets and comes in different widths. • Safety - unlike films, which, when heated under the influence of sunlight, can release harmful elements into the air, foil does not emit anything.	• Low strength - foil can be easily damaged by touching it with a fingernail or any hard object. • Inability to transmit light. • Lack of aesthetics in appearance.

To secure the foil to the glass, use double-sided tape. If traces of glue remain after removing the foil, they can be easily wiped off with alcohol or soapy water.

Protecting privacy with special glass

Some owners of private houses without a fence or apartments on the lower floors think about hiding their home life even at the stage of repair and installation of windows. For this purpose, there are double-glazed windows with special coatings:

Matte. Suitable only for bathrooms or other rooms from which the view of the street is not important. After all, such glass will protect not only from outside views, but also limit the view from the inside. There will also be less sunlight in the room.
Mirrored. They work on the principle of sun protection film for windows. The mirror surface is built into the structure of the glass unit.

Advice. Before installing such structures, you need to thoroughly weigh all the pros and cons. No matter how the film stains the window, it can still be removed. This won't work with glass, so it will be more difficult to fix anything.

Both with film and with special windows, it is advisable to use additional methods of window protection. For example, ordinary curtains. In the evening they will be indispensable. And during the day they can remain constantly open.

What's wrong with the first floor?

Disadvantages of an apartment on the first floor 1. Noise. The knocking of the entrance door, the ringing of the intercom, cheerful companies, the screams of children, the noise of approaching cars - residents of the first floor hear all these sounds much louder than others.

Interesting materials:

How can you preserve a rose for the winter? How can you save a rose? How can you keep roses in a vase longer? How can you keep roses alive? How can you save roses? How can you insulate roses for the winter? How can you close roses for the winter? How can you dry rose petals? How to mulch the soil for roses? How to cover roses in the garden for the winter?

Method 1. Tinting balcony windows on your own

Tinting balcony glass is not a complicated process. Each person is able to tint a balcony with their own hands.

We recommend: Thermocouple for a gas boiler: detailed instructions on the design and principle of operation, checking the serviceability of the thermoelectric sensor with a multimeter, restoration and replacement

Using the right tool and accurately following the recommendations, you can achieve a result that is not much different from the work done by specialists.

For successful pasting you will need the following tools:

Stationery knife
Spray
Rubber spatula
Lint-free towel
Degreaser

Balcony tinting should be carried out at temperatures no higher than 35 degrees. It is not advisable to apply the sticker at temperatures below 10 degrees. The air humidity in the room should be between 25 and 70%.

Before starting work, you should clean the window from dirt and dust. To do this, we recommend using detergents. You can add ammonia to the solution. Apply the solution to get rid of dirt and dust. Allows you to remove grease stains on the window.

Then you should prepare the required piece of film by measuring the required dimensions of the window around the perimeter. To the resulting size you need to add 0.5 cm on each side. The allowance will be removed later. For successful gluing you will need a spray solution. Add 5-6 drops of detergent to 1.5 liters of water.

The prepared solution is sprayed using a spray bottle over the entire surface of the window. Excess moisture must be removed using a rubber spatula. The prepared piece of film is removed from the base. The part being removed may curl or wrinkle. To avoid kinks, folding, removal should be done with an assistant.

The removed part is glued to the window from top to bottom. Any bubbles that arise are removed with a spatula. Try to avoid horizontal folds. You should carefully ensure that the film adheres tightly to the surface of the window. If bubbles appear, if you cannot get rid of them with a spatula, you should pierce the bubble with a thin needle. After this, use a spatula to expel the remaining air from the edges to the hole.

After the sticker is completely applied, you should cut off the excess around the perimeter. The work should be carried out carefully, slowly, so that gaps do not form between the frame and the film. The resulting gaps can spoil the entire appearance of the work done.

If you follow the recommendations, you should get perfect window tinting, and all questions about how to cover a balcony with film will disappear. Manufacturers guarantee preservation of properties regardless of external or internal application to the window surface. But we recommend that you carry out the gluing work from the side of the room. Internal adhesive will protect the film from external weather conditions, and its service life will be longer.

Method 2: Description of the workflow

In order to tint the windows on the balcony, no special skills are required. It's quite simple:

clean the glass surface
paste the material
smooth to get rid of bubbles

Solar film for balconies is very sensitive to temperature and humidity levels. Therefore, it is better to carry out work when the temperature outside is from +10° to 30°C. The humidity level should also be in the green zone, that is, from 40 to 70%.

Stage 1. Material selection

Having decided on the type of tint, you will need to select the light transmittance. It is measured as a percentage:

The lower the value, the darker the glass you will get at the output. The width of the products may also vary, standard sizes:

from 0.50, 0.76 and up to 1 m.

Before purchasing, measure the windows on your balcony and choose the size of the film so that you have to cut off as little excess as possible, and ideally not cut it off at all.

Stage 2. Preparatory activities

To work you will need the following available tools:

scissors (sharp) or stationery knife
ruler
ruler
shampoo or liquid
spray
sponge
window scraper

The room or balcony where the tinting will take place must be cleaned in advance. Since even slight dust in the air can settle on the film and ruin the appearance of the window.

A soap solution is prepared in a spray bottle (1 teaspoon of soap or shampoo is enough).

The glass is washed thoroughly; for convenience, you can use a scraper with a silicone blade and window cleaner. The surface is wiped dry.

Stage 3. Gluing tint

Can be glued inside and outside. Of course, if you need to tint the windows on the balcony on the floor, then the work is definitely done from the inside.

The glass needs to be measured and the canvas drawn according to size, cut with scissors or a stationery knife. You can leave a 5mm margin, which can then be easily cut to size.

The glass is wetted with a soap solution from a spray bottle. The adhesive side of the tint is removed from the protective layer by 5 cm. You also need to spray the adhesive side with a spray bottle. Gluing begins from the top edge of the glass, gradually peeling off the protective layer. The tint is carefully straightened from top to bottom.

The tinting surface is treated with a soap solution and a window cleaning scraper (you need to move in a “herringbone” pattern) to remove air bubbles. You need to spray the film so that the scraper glides well without catching.

It may happen that an air bubble remains, then a thin needle is pierced in this place and the air is expelled through this microscopic hole.

This method of tinting loggias and balconies will suit most of our readers, since in the case of plastic windows it will be difficult to remove the glass from the frame. If there is such an opportunity, then carefully gluing the film will be even easier. Only two steps will be added here - you will need to remove the glass, the tinting sticker is done in exactly the same way, after the tinting has dried, you can insert the glass back into the frame.

Sources

https://hozsektor.ru/solnczezashhitnaya-plenka-na-okna-foto-video-dostoinstva-i-nedostatki
https://dom-elite.com/furnitura/chem-zakryt-okna-balkone
https://balkonsam.ru/okna/zatemnit-okna-na-balkone.html
https://TheKomod.ru/dekor/aksessuary/plenka-na-okna.html

How do you like the article?

Sergey Vladimirovich

Ask a Question

Kinds

The modern market of film coverings for windows offers the buyer a wide range of similar products. Among the traditional options, a picky client can buy a coating with a special effect. For example, the film can be:

athermal;
reflective;
anti-vandal;
booking;
perforated;
architectural;
heat-saving;
heat reflective;
stained glass;
combined.

In this case, the film can be matte opaque or glossy traditional. Today it is available in several varieties for windows. Coatings can be options for film protection of glass sheets of double-glazed windows or have several functions.

In addition to being functional, the film can be purely decorative. This coating is called stained glass. This is a self-adhesive decorative film with a transparent base and a pattern. Its purpose is to partially decorate windows, as well as to decorate the glass of interior doors. Essentially, this is a colorful coating that covers the glass, decorating it. The themes of such films are often geometric shapes, lines, and floral motifs. Less often, it imitates the translucent texture of stone and silk textiles.

In some cases, it serves as a curtain and is presented more as a decorative element, indicating that it belongs to a certain style. Stained glass film can have a simple pattern and cover only the lower part of the windows. It is used more often on windows whose frame consists of 6-12 small glasses. The fragments are filled flush with film, while the lines of the overall pattern may not coincide.

Sometimes the coating imitates frosted glass with a transparent pattern. In other cases, the print depicts window openings divided into many small windows. This film is used in different rooms of the home, including bathroom glass curtains and bay windows. It does not interfere with the opening of windows and can imitate different patterns carved on glass, including python skin.

Products with a functional focus are divided into several varieties. These include sun-protection and energy-saving coatings. Each type has its own categories. Products differ in the type of fastening. Some options are fixed from the inside of the home, others must be fixed from the street. The former are often distinguished by a wide range of colors, the latter are characterized by a reinforced coating of the top layer, which protects the surface from negative environmental factors.

Sometimes the film is glued to the glass during its production process. At the same time, any type of film coating undergoes certification. It indicates its compliance with sanitary and epidemiological standards. Interior and exterior coatings differ in characteristics and resistance to external factors. These are products that are safe for human health, do not emit toxic substances and are not susceptible to the appearance and spread of microorganisms.

Sun protection

This category includes solar control coatings to reduce the light flux that enters the room through glass. Depending on the type, they may have one-way visibility of the glass sheet after installation of the film. The coverings are designed in such a way that what is happening in the room cannot be seen from the street. Even the outlines will not be visible, the room will not be completely visible. However, anyone inside the room will see everything that happens outside.

Foil

The budget type is foil film materials based on polyethylene in rolls. Such coatings are used in hot weather, fixing them to the glass from the inside. Unlike the bulk of varieties, they do not have a sticky backing. Fixation is carried out using tape.

After the heat subsides, they are removed. There is no tight fastening, and it is problematic to see through them.

Mirror

An alternative to them are mirrored counterparts with tinting. They are used for plastic windows. The quality and performance characteristics of this film are quite high. It is characterized by strength and durability. If properly applied to the glass unit, it will last for several years.

Due to aluminum and tin oxide in the composition of the layers, the roll film reflects visible light outward, as well as infrared radiation. Compared to its budget counterpart, it is distinguished by its aesthetic appeal. The architectural variety protects the glass from mechanical damage. It involves pasting on the outside. At the same time, its light reflective abilities are no less than its classical counterpart.

Tinting

The main difference between these varieties and their mirror counterparts is the fact that instead of reflecting visible light and infrared radiation, they absorb them. However, the effectiveness of films in this category depends on the degree of toning. The film can be dense or completely transparent: the efficiency coefficient varies from 15 to 60%. At the same time, the film differs in appearance: the less tinting, the lighter and brighter it conveys the image of what is happening.

The disadvantage of tinting coatings is that they cut off most of the visible light flux. This factor especially manifests itself negatively in cloudy and rainy weather, making the room dull and gloomy.

Lack of illumination of the space inside the house (apartment) can provoke depression. Therefore, the use of such film must be approached thoroughly. For example, it is not advisable to glue it if the windows face the north or west.

Thermal insulation

The principle of operation of such a film differs from its sunscreen analogues. All coatings in the line are aimed at minimizing heat loss in a particular room. In fact, they can be called an alternative to energy-saving double-glazed windows. Their purchase will save your budget, and installation will cost less than replacing glazing. Such coatings do not change quality indicators under the influence of temperature changes.

A fairly high percentage of rays are reflected inward. The daylight braking level does not exceed 30%. This is a thin multilayer material characterized by transparency. To increase heat-reflecting and energy-saving properties, alloys of silver, chromium, and nickel are used in the production of such films. Energy-saving film can be combined, having the protective function of preserving glass.

Sources

https://okna-dom.net/plenka-na-okna-ot-sosedey/
https://9vrata.ru/zhalyuzi/plenka-na-okna-ot-postoronnih-glaz.html
https://iletyou.ru/chem-zakryt-panoramnyye-okna-ot-sosedey/
https://dom-naveka.ru/remont-v-kvartire/chem-zakleit-okno-ot-postoronnih-glaz.html
https://avis-style.ru/chem-zakleit-okna-chtoby-ne-bylo-vidno-s-ulitsy/
https://design-homes.ru/idei-dlya-doma/zakryt-okna-ot-vzglyadov
https://www.oknamedia.ru/novosti/sredstva-okonnoy-samooborony-ot-lyubopytnyh-sosedey-42035
https://VesnaDomPenza.ru/remont-v-kvartire/okna-na-pervom-etazhe-kak-zakryt.html
https://proreshetki.su/chem-zakryt-okno-na-pervom-jetazhe-svoimi-rukami/
https://netigor.ru/kak-sdelat-s-odnoy-storony-neprozrachnym-steklo/
https://balkon4life.ru/dizajn/shtory-i-zhalyuzi/chem-zakryt-okna-na-balkone-ot-solntsa/.html
https://skolkogramm.ru/info/chem-zakleit-okno-ot-postoronnih-glaz-sovety-dizajnera
https://stroy-podskazka.ru/okna/furnitura/plenka/