Irrigation hose, which one is better to choose depending on the material and purpose

Expert: Nikolay Alexandrovich

*Review of the best according to the editors of expertology.ru. About the selection criteria. This material is subjective in nature, does not constitute advertising and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required.

You can water small beds with a hand-held garden watering can, but to care for a large plot of land at your dacha you need a hose. It is put on the gander of the crane and moved around the garden, supplying water to the rows of garden crops. This watering device saves energy and time, helping to get a richer harvest. Although outwardly a garden hose appears to be just a piece of rubber tube, there are 6 main criteria for choosing such a product. Our experts will tell you about this and show you the eight best irrigation hoses available for purchase in the Russian Federation.

Main types and technical characteristics

A correctly selected hose (hydrose) will ensure optimal watering conditions. The main technical characteristics of this element depend on:

• from the material;
• wall thickness;
• number of internal layers of the pipe;
• availability and quality of reinforcing cord (braid);
• diameter of the irrigation hose;
• manufacturer's company;
• warranty period.

Hose in package Source dachnik.market

Rubber hydraulic hose

An affordable, popular type of hose. They produce two types: reinforced (with thread braid) and without a core. They are used for automatic watering (spread the hose around the site, connect to a water supply source), and manual. The scope of application is not limited to watering the site; it is used in factories and car washes.

Product advantages:

• low cost;
• resistant to temperature changes (from -30 to 90⁰С);
• withstands high pressure (some types up to 54 bar);
• long service life (up to 20 years);
• strength;
• does not deform;
• resistant to UV radiation;
• elastic;
• Thick walls prevent sleeve creases and the formation of loops.

Rubber products Source image.made-in-china.com
You need to pay attention to the degree of rigidity of the material; elastic, soft rubber is suitable for watering. Solid material products are more often used in industry, stationary installation of communication systems. It is not recommended to keep the hose in the sun for a long time; cracks may appear, especially in hard rubber hoses.

Disadvantages of a rubber sleeve:

• the hoses are quite heavy;
• rubber is not recommended for pumping drinking water and food products due to toxicity;
• the hydraulic hose can injure the plants.

They produce hoses from 20 to 200 m, with wall thicknesses from 4 to 6 mm. Standard diameter: 1/2 inch (1.27 cm), 3/4 (1.905 cm), 1 (2.54 cm).

Assortment of rubber products Source avatars.mds.yandex.net

Hydraulic hose made of polyvinyl chloride

Products made from this material have replaced rubber hoses on the market - they are lighter and comparable in cost. Polyvinyl chloride (PVC) belongs to the group of synthetic materials, thermoplastics. On sale, green hoses are mostly used for watering gardens and plots.

PVC products are ordinary, single-layer, transparent. They are less suitable for watering, thin, and break. Used for transfusion, supplying water over short distances, and for domestic needs. In the sun, algae grows in the transparent sleeve.

For irrigation systems, two-layer, three-layer, and four-layer hoses reinforced with synthetic threads are used. Products with a reflective coating layer protect the material from UV radiation.

Advantages of PVC products:

• withstands pressure up to 20 Bar, due to reinforced weaving, temperatures from -25 to + 60⁰С;
• long service life, depending on the type from 10 to 35 years (with the exception of single-layer);
• polyvinyl chloride can be food grade or technical;
• a wide range of;
• smooth internal walls provide low resistance inside the hose, resulting in good pressure;
• not heavy;
• large selection of accessories for PVC hoses;
• Easy to maintain, easy to fold, stretch.

PVC hose Source cdn.vseinstrumenti.ru
Depending on the type of reinforcement and the number of layers, the hose holds different pressure. When thinking about the question of which watering hose is best, pay attention to the markings of the hose. It indicates the maximum permissible pressure. The four-layer reinforced sleeve holds pressure up to 40 bar.

Disadvantages of PVC products:

• low technical characteristics of single-layer hose;
• at sub-zero temperatures it loses its elastic properties;
• without a protective coating from ultraviolet radiation they fade over time.

Length of standard coils: 25; 50 m. Diameter: 1/2 inch (1.27 cm); 3/4 inch(1.95 cm); 1 inch (2.54 cm). The elasticity of the material decreases at a temperature of -5⁰C.

PVC hose with a diameter of 32 mm Source images-na.ssl-images-amazon.com

Thermoplastic elastomer hydraulic hose

Polymer hoses (TEH) with high plastic properties, for which the material is called “thermoplastic rubber”. It features high technical characteristics. They can be used all year round. The products are included in the top rating of irrigation hoses.

The advantages of TEP include:

• withstands pressure up to 8 Bar, temperature range from – 50⁰С to + 90⁰С;
• operational life – over 15 years;
• high ductility of the sleeve;
• does not bend, does not form creases;
• thanks to the rough surface it does not slip in your hands;
• easy;
• increased resistance to chemicals and UV radiation;
• easy to maintain, twist, carry;
• able to withstand pressure overloads without loss of technical characteristics or shape.

TEP in the bay Source ozon-st.cdn.ngenix.net
Among the disadvantages, the high price is noted, in comparison with rubber, PVC hoses.

Advice ! If you need to purchase a durable hydraulic hose, and you are wondering which hose for irrigation is better to choose, stop at thermoplastic elastomer. The inflated price is compensated by reliability and long service life.

Silicone hydraulic hose

Silicone – high molecular weight compounds containing silicon and organics. The characteristics of plasticity and stretchability are superior to rubber. Regular, non-reinforced hoses are suitable for irrigation with low water pressure (up to 2 bar). Reinforced silicone hoses can withstand pressures of up to 10 bar, the advantages and disadvantages of which, together with single-layer hoses, are given below.

Advantages:

• lungs;
• elastic;
• inexpensive;
• easy to fold and carry;
• reinforced hoses hold pressure up to 10 bar;
• depending on the type, they are operated in a temperature range from – 15⁰С (reinforced), – 5⁰С (not reinforced) to + 50⁰С;
• creases do not form when folded repeatedly.

The disadvantages of hoses include the fact that single-layer, unreinforced products heat up in the sun, become excessively plastic, become deformed, and small cracks appear.
The service life of a silicone hose is 10 years.

Silicone sleeve Source f.allegroimg.com

Corrugated plastic hose for irrigation

The result of mixing high and low pressure polyethylene with fin-type molding is to obtain plastic corrugated pipes. They produce single-layer, multi-layer, and reinforced corrugated hoses. The ribbed surface gives strength and flexibility to the product. Different types of hose are used for industrial purposes. It is also used for irrigation, but with some restrictions. Plastic hoses are convenient for laying temporary pipelines around the site; it is more difficult to water by hand.

Among the advantages of a corrugated hose:

• maintains pressure (up to 7 bar);
• the hose is UV resistant;
• withstands temperature changes;
• lightweight, compact;
• low cost.

Corrugated plastic hose Source avtolive.net
The main disadvantage is that with frequent bending and squeezing, microcracks form, so it is preferable to use it in a stationary position. If you water with a corrugated hose manually, the service life is limited to 2-3 years.

Fabric Nylon Products

Nylon threads are used as a braid for plastic and rubber hoses. They produce a nylon hose, like a fireman's hose, for watering. It is lightweight, compact, and easy to use. Maintains pressure from 3 to 5 Bar. Not recommended for use at sub-zero temperatures. At an affordable price, a nylon hose has a short service life (1-2 years). It cannot be classified as the “best watering hose”.

Nylon tape Source planeta-remonta.net

Expansion hoses

They consist of two layers: the inner one is stretchable rubber (rubber, polyurethane - a group of synthetic elastomers), the outer one is gathered nylon (fixes the degree of stretching). Most manufacturers produce products with a reinforced rubber layer.

If there is an outlet with constant water pressure on your garden plot, the question arises of how to choose a watering hose; pay attention to the expandable hydraulic hose.

Product advantages:

• easy;
• compact;
• folds quickly;
• when folded, it takes up little space;
• does not get tangled;
• easy to maintain;
• easily connects to a water source;
• complete with fittings and adapters for various pipe diameters;
• versatility: used for watering, household needs (car washing, cleaning the area);
• affordable.

The irrigation hose stretches under the pressure of water. The standard size of coils varies from 15 to 60 m. The nylon layer prevents contamination and protects rubber from damage. It is optimal to use on small areas of wasps with a stable supply of water. Over large areas, due to internal resistance and unevenness on the ground surface, the outlet pressure drops. If the pressure is insufficient, the efficiency of irrigation decreases; it is more cost-effective to use PVC and rubber hoses. On average, a hydraulic hose is designed for pressures up to 5 bar.

The main disadvantage is that it is impossible to restore a separate section in the event of a break or mechanical damage. There are especially many complaints about stretchable sleeves from Chinese manufacturers.

Stretchable hydraulic hose Source avatars.mds.yandex.net

Spiral hoses

It is appropriate to use for watering a small local area, flower beds, and flower beds. Standard section is ½ inch (1.27 cm). A plastic sleeve made of polyurethane and ethyl vinyl acetate is twisted into a stretchable spiral.

Advantages:

• easy;
• compact;
• does not tangle;
• does not break;
• does not stretch along the ground;
• does not injure plants;
• withstands pressure up to 5 Bar; temperature range from -5 to + 50⁰С.

The main disadvantage is that the small cross-section of the hose does not allow the watering hose to be used over large areas. Stretchable, spiral-type hydraulic hoses can be included in the rating of watering hoses for gardens with a small area; a 5-meter spiral can stretch 5 times.

Spiral type Source cdn.vseinstrumenti.ru

Which one should I buy?

User opinions are very important when choosing a watering hose. The following is a description of the most popular model.

GARDENA Classic

This model is made of PVC . Available in lengths up to 20 meters. Suitable for watering from a pump or water line. Working pressure 22 atmospheres.

To ensure rigidity, it has internal reinforcement and an additional strip that prevents twisting and bending. The hose is also resistant to UV radiation, mechanical and climatic influences.

The cost starts from 1600 rubles. Gardeners are pleased with the strength, flexibility and quality of the material. But it is advised to use the hose only as a stationary one, due to the heaviness of the entire coil. Read reviews here.

Hoses for irrigation of various types of purposes

Hydrosleeves can be divided according to the type of purpose into two types: for regular and economical watering.

The first includes standard hoses, with a sprinkler system, made of various materials, for manual and automatic watering. Sprinkler nozzles are used to uniformly irrigate individual areas for plants with shallow root systems, for example, watering a grass lawn.

Sprinkling on the site Source vasha-teplitsa.ru

Tapes and sleeves for economical irrigation are cost-effective in arid, low-humidity climates. In places with a limited number of water reserves, low water pressure. Thanks to this method of irrigation, they save on paying for water when the source is a central water supply and a meter is installed.

Economical watering hoses include:

• “blind” or closed type;

Hose for drip irrigation Source 7745.by

• oozing;

Oozing hydraulic hose Source econet.ua

• porous;

Porous tape Source kasior.ru
A “blind” closed pipe is used to connect external drippers used for irrigation.

The porous tapes have holes along the perimeter of the entire diameter of the sleeve; the soil is moistened evenly.

Drip systems

Different types of drip irrigation allow automatic delivery of water to plants and ensure regular watering. This increases productivity and significantly reduces labor costs. The choice of a drip irrigation system depends on the type of crops grown and the characteristics of the water supply source.

See also: Catalog of companies that specialize in swimming pools and small architectural forms.

In conditions where water is supplied under low pressure, there are differences in soil, and a disproportionate distribution along the belt occurs. It is better to use a compression water supply system. When the pressure is sufficient, it is not necessary to use a straight section of compresses.

Drip irrigation Source trojnik.ua

Important ! Please note that the emitters (permeable drip holes) have a small diameter. If the water is not clean enough and contains suspended particles, the holes become clogged. Therefore, the drip irrigation system is equipped with water filters at the inlet.

No. 5 – XHOSE Magic Hose

Price: 699 rubles

The hose length is 30 meters, which is usually enough for a garden. The maximum water pressure that this model can withstand is 16 bar, and the maximum operating temperature is 36 degrees.

The material used for the hose is polyester woven fabric and latex, the watering can is made of plastic. The hose is light and very flexible. We can say that this is a compact option that is perfect for a summer residence. It can be extended three times in length and can be connected to a regular faucet. Users note its durability when used carefully.

Unfortunately, the hose is not able to withstand high fluid temperatures.

XHOSE Magic Hose

Video description

In this video you will see what types of garden PVC watering hoses there are and what their advantages are:
The instructions indicate for which crops the emitter pitch is suitable.

Before determining which watering hose to choose for drip irrigation, focus on the following parameters:

1. Tape diameter . The standard for personal plots is 16 mm. To irrigate large areas, a 22 mm hydraulic hose is used.
2. Wall thickness (unit mil), the higher the number, the stronger the hose. There are three main types: single-season (5-6 mil). For repeated, reusable use, tubes up to 8 mil thick are suitable. In conditions of increased risk from mechanical damage (stones, animals), tubes with wall thicknesses of up to 15 mil are used.
3. Amount of water consumed (liter/hour). For a personal plot, 1 to 1.6 liters/hour is sufficient.
4. The required pressure varies from 0.2 to 2 atm.
5. Resistance of the irrigation hose to UV, salts, microelements.

Hose with a diameter of 16.1 mm Source static-eu.insales.ru
Hoses are distinguished by the type of emitter:

• Slotted . Water flows slowly through spiral gutters, spreading evenly over the soil and moistening it over the entire surface.
• With built-in emitters . Used for root moisture.

The best hoses for watering in the country with economical water consumption are thick-walled tape tubes with emitter droppers. They serve for a long time. Select a hydraulic hose that matches the soil type and agricultural crop.

No. 3 – VORTEX

Price: 1,319 rubles

This three-layer reinforced hose is made of PVC. Its length is 50 meters, diameter is 19 mm, maximum pressure is 10 bar.

This hose is suitable for working in hot conditions, as it can withstand temperatures up to 60 degrees. It is quite comfortable and soft, not too heavy for such a long hose. This model differs from others in its excellent flexibility and elasticity.

But there is a problem with this, because the hose constantly twists, which makes work much more difficult.

Hose VORTEX

Tips for choosing a hose

In specialized chains and garden departments of hypermarkets, they sell watering hoses by the meter, in pre-cut coils. They come with accessories or can be purchased separately.

Standard sizes

If you need to make a metric conversion, and the question arises, how many cm is a 1/2 inch hose, you can look at the table or use an online calculator.

Hoses with different diameters Source polytechnic-nn.com

Selection by parameters

Before choosing a hose for irrigation in your country house or garden, you need to know the water pressure, the diameter of the faucet outlet, and how long it will be enough to cover the entire area of ​​the area being watered.

Also, before choosing the length of the hydraulic hose, it is recommended to use a scaled site plan. Draw paths on it, the location of flower beds, beds. Draw the route of the irrigation system. It is possible to distribute the irrigation system into separate segments.

Lay the main watering hoses along the perimeter of the paths in a straight line. To them, using connectors (adapters), connect sections for watering remote areas, flower beds, beds. If the pressure allows, the main hoses are taken with a larger diameter, for example 3/4, branch hoses - 1/2 inch. Such an irrigation system is advisable from the point of view of the correct distribution of water pressure. It falls at the ends of the route and is reduced due to the installation of connectors.

Then measure the length of the routes from the water source, in a straight line, diagonally. Buy a hydraulic hose with a reserve.

Different types of flexible pipes for irrigation Source www.goodyearparkerstore.com

This might be interesting! In the article at the following link, read about the best irrigation hose - comparison of models.

Before choosing a hose for irrigation, find out what pressure is needed in the system. They are also selected based on the length of the irrigation route. The longer the hose, the larger the diameter should be with sufficient pressure.

For small sections, choose sleeves with a smaller diameter. Normal pressure in the irrigation system is from up to 5 Bar, average 2-3 Bar. It is necessary to take into account the resistance when water passes through the hoses. In proportion to the length, the pressure drops, the pressure becomes less. The problem of low pressure is solved by installing a pump.

Before deciding which diameter of irrigation hose is better, ½ or ¾ for your area, you need to know the technical parameters of the irrigation system.

Technical parameters are indicated on the coil packaging Source ae01.alicdn.com

Tips for choosing a hose when purchasing

Before choosing a hose for watering in your country house or garden, you need to pay attention to its quality characteristics:

• Appearance. If the product is packaged in a cardboard box, ask the seller to unpack it. The entire length of the hydraulic hose must have the same color intensity. Branded hoses are marked along the entire length in equal sections. Check for mechanical damage.
• Study the instructions, read the technical characteristics of the watering hoses. The higher the temperature and pressure parameters, the better.
• Try to buy hydraulic hoses from trusted brands. Please pay attention to manufacturers' warranties.
• The choice of hose for irrigation at the dacha depends on the properties of the protective layer. The best samples have anti-vandal coating and UV protection. Remember that the transparent sleeve has a high risk of algae.
• Rubber and polymer hoses may have an odor, but not a pronounced one. A strong “aroma” should alert you. Usually these are products from Chinese manufacturers.
• Find out what accessories are on sale for this type of hydraulic hoses.

Hose rupture Source potolokspec.ru
Talk to a consulting manager. He will help you choose a hose according to technical parameters. If you don’t know, for example, how many cm a 3/4 inch hose is, the seller will convert the metric data into the required format.

Reinforcement

By performing this, the hose manufacturer protects its products from the formation of kinks that impede the flow of water during operation. Reinforcement is carried out using fibers of synthetic origin, they are placed between layers of polymer. This provides the product with high strength and allows it to maintain its shape. It is better to choose hoses with diagonal reinforcement or with a spiral cord structure. Fine mesh reinforcing mesh does not give the desired effect. Models with such reinforcement are cheaper, but it is better to avoid buying them.

Accessories for watering hose

Before purchasing a hose for irrigation, decide on the irrigation system: manual, automatic, drip. Elements can be installed permanently or moved. The selection of fittings depends on the solution to these issues.

Main types of accessories:

• connectors,
• fitting,
• adapters,
• taps with adapters for several hoses.

All of them are designed to connect elements of the irrigation system.

The fittings regulate the type of water jet, pressure, and irrigation area. These include: sprayers, nozzles, tips, sprinklers.

Hoses, fittings, and maintenance equipment are selected depending on the type of irrigation system.

Accessories for irrigation systems Source image.made-in-china.com

This might be interesting! In the article at the following link, read about how to choose a hose for irrigation from offers on the market.

How to store

Typically, garden hoses are stored in basements or outdoor outbuildings, and the following rules must be observed when placing them:

• Before storing, you should carefully read the instructions; many hoses are designed to operate at temperatures not lower than -20 °C; less common are products that do not withstand the threshold of -5 °C. In this case, taking into account the remaining water that is stored in the inner shell, it is better to place them in a residential building and heated premises.
• At the end of use, the water is drained from the sleeves and then wound into coils, trying to avoid kinks and twisting.
• There are special drums or reels on sale on which products are wound; if they are not available, such a design can be made independently.
• If there is no reel, the products are placed on shelves, trying to prevent access by rodents, which often eat the polymer shell.
• It is better to store hoses separately, avoiding placing heavy or sharp objects on top of the coils.

Rice. 14 Comparison of the behavior of a fake (above) and an original (below) Fitt YOYO 2x extension hose when supplied with water at a recommended pressure of 3 bar

Video description

From this video you will learn about Karcher Primoflex watering hoses, what are their differences, how long do they last, and most importantly, is it worth buying them:
Advantages of Karcher hoses:

• high technical parameters: pressure (up to 50 Bar);
• reliability is ensured by a multilayer structure (5 layers), double reinforcement (metal braid, thread);
• the internal protective layer reduces the resistance inside the watering hoses and protects against chemicals;
• the sleeve does not curl;
• The minimum warranty period is 10 years.

German quality is confirmed by a fairly high price.

Kärcher products Source i.simpalsmedia.com

Rehau watering system

A German company has patented a unique hose reinforcement technology (counter threads intertwined at an angle). It allows you to make the sleeve so strong that it can withstand the load of the car. Irrigation hoses do not form kinks.

The products have all the advantages of Karher sleeves. The company has a more thoughtful marketing policy. They produce irrigation systems of three classes: premium, comfort, and universal. Each category is designed for certain loads and service life.

The product warranty is 20 years.

Rehau elastic hose Source fwater.ru

Watering system Gardena

A characteristic feature of elastic pipes for irrigation from a German company: increased wear resistance, reliable connection of elements, thanks to special manufacturing technology. It consists of combining different types of materials (polyvinyl chloride, reinforcement, textile braid). A characteristic feature of the Gardena sleeve is 4 longitudinal stripes along the entire length of the sleeve. This is not just a brand name, but special voltage lines. They allow the gear joints of the fittings to firmly connect the hydraulic hoses.

Garden hoses for irrigation, which ones are best to choose. The company presents several product lines. Contact the store manager, he will select the product in accordance with the required technical characteristics.

The product warranty is 20 years.

Gardena company product Source instrumtorg.ru

No. 2 – Quattro Elementi

Price: 990 rubles

Another latex hose is 23 meters long. It is equipped with a connector for connection and a multi-mode watering gun. The length without pressure is 7 meters.

The top of the hose is covered with fabric, which not only increases its wear resistance, but also makes it soft. It is noted that it is lightweight and takes up very little space; it can easily fit into a backpack. The pistol nozzle allows you to adjust the pressure power and switch between different watering modes. It is possible to lock the trigger so as not to accidentally switch.

There are problems with connections that are made of poor quality plastic.

Hose Quattro Elementi

Video description

In this video you will learn about the advantages and disadvantages of Garden and Forest hoses:

Watering system Claber

The top ranking of the best brands includes the Italian company Claber. They produce a wide range of equipment and accessories for all types of irrigation systems. The emphasis is on economical use of water. The cost of products is lower than that of German brands.

Claber system Source sc02.alicdn.com

Watering system Fitt Group

A special feature of the Fitt Group irrigation hose is the use of a unique patented reinforcement technology (NTS). A polyester thread spirals around the entire sleeve. The advantages of the brand include: wide range, high technical characteristics, reasonable price. The operating temperature is -10 C – +40 C. But the warranty period is short, two years.

Watering system PolymerHose

Russian manufacturer for more than 20 years on the market. During this period, the company significantly expanded its production capabilities and product range. All products have international certificates.

“Snake” PolymerHose Source cdn.konturclick.ru

Advantages of PVC hydraulic hoses PolymerHose:

• wide range of products (from 1 to 5 layers with reinforcement);
• single-layer thick-walled hoses, have protection against ultraviolet radiation, a bactericidal layer inside;
• they produce hoses for food products and clean water supply;
• hoses have anti-vandal coating against abrasion and mechanical damage;
• are operated at low temperatures (-10 C) and high (+60 C);
• resistant to chemicals;
• affordable price.

Another advantage is that it is possible to order a custom-made hose in coils of the required length.

No. 4 – Park

Price: 859 rubles

The 15-meter hose from Park is made of latex and has a diameter of 13 mm. It comes complete with two connectors and a watering gun with seven operating modes.

The nominal length of this hose is 5 meters, so when a large water pressure is created, it stretches three times. I am pleased to have a very comfortable pistol that fits well in the hand and has a flexible mode control. There are adapters that, if necessary, allow you to change the final diameter. It is noted that the hose is quite durable and is not so easily damaged, unlike many competitors.

The disadvantages include the fact that this model is quite short. In addition, it requires quite a strong water pressure to stretch it.

Hose Park

Care Tips

1. Hoses should not be left in the sun for a long time, even if they have UV protection. After use, the sleeve is rolled up. It is recommended to use special drums and mobile carts. They facilitate the process of watering, twisting, and protect from mechanical damage.
2. Although some products are operated at sub-zero temperatures, hoses should not be stored in such conditions.
3. Sudden pressure surges and temperature changes have a negative impact on the operation of the irrigation system.
4. There is no need to store garden tools near sharp, cutting objects, and do not place third-party objects on top of the hoses. If it is not wound onto a drum, it is better to hang the sleeve on a special pole, a large hook.

Proper storage Source i.pinimg.com

Working pressure or burst pressure

Some manufacturers indicate on their products the operating pressure at which the products can be used in normal mode, others indicate the maximum pressure value on the label. For a conventional single-layer hose, the maximum pressure value is 2 bar; a multi-layer reinforced product can withstand 6-8 bar. For high-quality hoses, the burst pressure sometimes reaches 30 bar. Even the cheapest hose can withstand the pressure in standard water pipes. Particular attention should be paid to the operating pressure if the hose will be used to supply water from your own well, equipped with a deep-well pump.

Hose FISKARS 3/4″ 20m 30bar

Briefly about the main thing

Before choosing a hose for irrigation at your dacha, you need to pay attention to the length and width of the area, the required type of irrigation system (economical or regular), the required pressure of the water jet, and the length of the watering route.

According to sales statistics, rubber and PVC hoses with reinforcement in the middle price segment are in greatest demand. They note a good combination of price and quality, and a fairly long service life.

If you want to purchase a product with a guarantee, pay attention to the German brands Körcher, Gardena, which provide a 20-year guarantee.

You should not focus only on price; it is better to choose according to technical parameters. When choosing a hose, you can consult with your sales manager and have a copy of the site plan with you so that you can immediately make calculations and find out the required type of hydraulic hose.

To store the hose, it is better to use special drums and store it at above-zero temperatures.

Ratings 0

Read later

No. 3 – PALISAD

Price: 895 rubles

This model is a reinforced hose, the length of which is 20 meters and the diameter is 19 mm. For greater strength, there are as many as three layers of latex, and the maximum pressure that the hose can withstand is 8 bar.

When assembled, this hose is 6.6 meters long, making it easy to store and carry. It is made of latex, which shows its good side and does not tear at the first damage. Thanks to the three-layer coating, the hose can last much longer. There is a gentle watering mode, which can often be very useful.

You need to be careful with the water pressure; this model does not require too much pressure.

Hose PALISAD