A swimming pool at the dacha is a special kind of pleasure in the summer heat. Today, inflatable and frame models have become the most common. The latter are considered more durable, stable and will be the best choice, especially if you want to have a large bowl. Let's figure out how to choose the right frame pool for a summer house or country house. What nuances should you consider, what accessories will you definitely need, and what can be neglected?
- Frame type
- Installation method
- Size
- Bowl material
- Pool underlay
- Ladder
- Filter selection
- Pool care
- Choice of chemistry and rules of use
- Seasonality
- Manufacturer
- Comparison of frame and inflatable pools
| The best frame pools | ||
| 1 | Intex Ultra XTR Rectangular Frame 26374 | The largest pool |
| 2 | GRE KITPROV738WO | Very strong frame |
| 3 | Bestway 56488 | The best ratio of price and quality |
| 4 | Summer Escapes P20-1252 | Best package |
| 5 | Intex Prism Frame 26718 | Good quality materials |
Other ratings:
- 10 best manufacturers of frame pools for summer cottages
Frame type
Which pool frame is better to choose?
Frame pools differ in the type of foundation. Depending on the design features, these can be rod, sectional and stationary
.
The latter are the most expensive. They are a monolithic structure made of strong materials. They are designed for a permanent installation location and, as a rule, they are partially or completely dug into the ground. Such pools are very durable and with proper care will last up to 20 years.
Rod
frames are the most affordable. They are assembled from vertical and horizontal stiffeners. The first ones are threaded into the sleeves on the vinyl cover, and the rest are attached to them. This design is as easy as possible to assemble. Ideal for seasonal use. But such pools are usually not deep.
Sectional
or sheet frames. More durable than the previous ones. Such pools are assembled from metal or high-strength plastic modules, which are fixed together with bolts. These pools are easier to clean and more stable.
Features of the frame model
The frame type pool is a prefabricated structure. It consists of a set of metal pipes and frames. After assembly, a bowl made of 3-layer extra-strong PVC film is placed inside it. Based on the type of technology used, tanks of the type in question are divided into two categories:
- Leafy. The design is a set of modules made of plastic or metal, inside which a thicket is placed.
- Rod. The structure consists of strong crossbars.
Reservoir of a rod structure Source akvastroym.ru
Based on seasonal use, they are divided into three types:
- Collapsible or seasonal use. Such models are installed with the arrival of warm weather, and dismantled with the onset of cold weather.
- Frost-resistant or all-season. Externally, they practically do not differ from the analogues described above, however, they have a more durable reinforced structure of the bowl material, and therefore can be left for the winter.
- Stationary. According to the main parameters, such a frame pool is better than those given above - a more rigid and durable structure, a greater variety of sizes, and a service life of at least 12-15 years. However, once installed, such tanks cannot be moved to another location, and in terms of costs they are comparable to their concrete counterparts.
Advantages of a frame pool:
- Cheaper than a stationary one.
- Frost resistance.
- Availability of choice by size.
- Classic geometry for the best landscape design.
- If necessary, you can choose a model that is sufficient in depth and space.
- Good strength.
- Optimal ratio of cost and functionality.
Private swimming pool with protective pavilion Source ivd.ru
Installation method
How to choose the right pool based on installation method
Installation in a pit or installation on a prepared site? This issue should be resolved in advance. The answer will allow you to more accurately determine the type of construction.
Site preparation
suitable for seasonal solutions of shallow depth. And also if it is not planned to locate the pool in a country house or suburban area in one place every year. Usually the area is leveled and well compacted. Less often filled with concrete.
If you plan to allocate a permanent place, we recommend choosing models suitable for installation in a pit
. These are deeper pools designed for year-round use. Most often it is installed taking into account the overall design of the territory.
Size
How to choose the right pool size
Today, customers have access to models of various sizes. To choose the most suitable solution, you need to value your needs. We offer a small comparative table using round pools as an example, which will help you decide.
| Bowl diameter | Need | Capacity |
| 2 m | for the average family | 1 person swims, 2-3 sit or play ball |
| 3m | for a small company with children | 2 people swim, up to 6 play or sit |
| 4 m | when guests are a frequent occurrence | 3 swim, 6 play, up to 8 people sit |
| 5 m | for a large company | up to 10 people |
| from 6 m | for a large company | from 10 to 16 people |
As for depth, you also need to focus on needs. If predominantly
If there are children splashing in the water
,
then the optimal solution would be a frame pool with a depth of
80 cm
. It will be comfortable for babies (provided it is not completely filled) and will allow adults to pamper themselves.
150 centimeters are good for complete relaxation on the water.
.
This will allow adults
to actively swim without touching the bottom with their feet and make gliding jumps.
If you plan to equip the pool with diving
, springboard or tower, then the depth should be calculated based on the height of the equipment.
Typically, frame pools with a depth of 2.5-3.8 meters
.
We recommend burying deep pools (more than 2 meters) into the ground. It doesn’t have to be completely, half the depth is enough. This will reduce water pressure and make the structure more durable.
Intex Prism Frame 26718
Good quality materials
The Intex Prism Frame 26718 pool is made of quality materials. A strong rod frame, a bowl film made of durable polyvinyl chloride, a strong, stable ladder made of stainless steel - all this was highly rated by users in reviews. Rating participant:
20 best pools for summer cottages
How to choose
First you need to carefully inspect the area and determine the intended installation location. There is no need to prepare the soil much for the short installation period. But for long-term seasonal use, it is better to thoroughly clean the soil from flowers and leaves, and choose a place away from trees. Deposits of vegetation will rot under the pool, which will cause unpleasant odors.
You will need a nearby source of water and a drain to replace it. It is advisable to have a socket or sufficient extension cord for the duration of cleaning, to ensure free access from either side of the bowl.
Next, the size, shape and type of frame are selected based on the area of the place and the purpose. For a small dacha and 2-3 people, a round bowl with a diameter of up to 5 m and a depth of up to 1.5 is quite suitable. Large spaces and companies will require a pool up to 10 m long, 3 m deep. In this case, it is better to focus on rectangular or oval shapes. At the same time, small containers are often equipped with hydromassage and colored lights. Frost-resistant ones can be turned into a skating rink, judging by the manufacturers' descriptions.
For independent bathing of children under 6 years old, it is recommended to take small inflatable pools. Small volume frame models are very rare. In addition, it can be dangerous for unattended babies around hard ribs.
After these considerations, the range of choices will already narrow. All that remains is to decide on the necessary components. Additional substrates for the bottom, sediments, ladders, canopies from the sun and debris, filters, brushes and vacuum cleaners for specialized cleaning - all this can be discarded or searched for your own needs. If the kit does not include a skimmer, it must be purchased separately. A skimmer is an item for cleaning the water surface from grass and other debris.
Lifehacks
In addition to clearing the land, it is advisable to make a foundation for the pool.
You can skip this point, but experts advise you to still use this trick for your own convenience and to protect the soil from accidental erosion. A seasonal pool can be filled with a concrete pad. For the frost-resistant type with a sheet body, it is better to dig a pit. This approach will also significantly improve the conditions of use.
The body, recessed into the ground, makes the product almost a full-fledged pool. It is easier to dive into it, you can place sun loungers, tables and other recreational items around it. In addition, if the walls break through, water will not flood the surrounding area.
Experienced users recommend choosing pools with separate nozzles for water input and output, this will extend the life of the filters.
Bowl material
What material should you choose a bowl from?
Pool owners know that the durability of a frame pool depends equally on the quality of the frame itself and on the material of the bowl. That is, the film that lines the inner surface. Today, buyers have three options available, which differ primarily in cost and durability.
Polyvinyl chloride
(PVC) is the most affordable and popular option. The cost of the material is from 4-5 thousand rubles. Service life is about 5 years. Does not tolerate strong temperature changes.
Polyester
will cost a little more, from 7 thousand rubles, but will last almost twice as long. Not picky about temperature conditions.
For maximum durability, we recommend choosing a pool with a polypropylene
. The material is the most expensive, from 10 thousand rubles. Moreover, the service life is often more than 15 years.
You should choose based on your needs and available budget. The more wear-resistant the material, the longer the pool will last.
Consumer Reviews
Many users note that they initially preferred rectangular designs due to their traditional nature.
However, no one talks about the preference or advantages of round models over rectangular ones (or vice versa).
In most cases, reviews relate to the quality of parts, suitability and power of filtration systems . Therefore, we can conclude that the attitude towards both types of frame pools is approximately equal.
Customer reviews can be read on this and this forum.
Read about the rules and criteria for choosing frame pools wisely in this section.
Pool underlay
What to put a frame pool on
The bowl is made of very durable material that can withstand heavy loads. However, it can be easily damaged by any object that falls under it (a stick, a small stone, a piece of glass). To avoid such troubles, professionals recommend laying a substrate on the surface before installing a frame pool.
Sometimes it comes complete with a seasonal pool, but this is extremely rare. More often you have to buy a substrate. Ready-made solutions meet quality standards, are durable, strong, fit the size of the bowl, and are easy to install. At the same time, it is not necessary to maintain brand unity.
The substrate is laid on a strong, flat surface. Permissible deviation is no more than 5 mm per 1 meter. It is not recommended to place it on loose surfaces or in close proximity to trees. Modular liners are not suitable for frame pools.
For pools that will be permanently located on the site, professionals advise making a special podium from wood, cement and decking boards.
Assembly, installation and arrangement
Half the success of using a frame pool depends on proper installation. We recommend following these tips:
Selecting a location
It is better to install the pool on an open, flat and slightly elevated area with good sunlight. Thanks to this, a minimum of leaves and a maximum of sun rays will get into the water for warming up. The installation site is leveled and covered with sand. It is best to cut off the soil along with the roots of the plants, and pour 3-5 cm of river sand onto the resulting area. It is better to put a geotextile lining under the bottom of the pool to protect it from growing roots and small stones.
Installation
We carefully study the attached instructions. Installation work is carried out in calm weather without wind; it is better to lay out the cup bag in the sun to soften folds and irregularities. You need to make sure in advance that you have all the necessary screwdrivers and keys at your disposal.
It is better to assemble the ladder from the kit in advance, before unfolding the sheet wall, this will help you get out of the pool with ease. Geotextiles in the inner part of the pool are glued with tape to each other, as well as to the walls of the frame pool. To better adhere the PVC film to the frame, you can use a vacuum cleaner.
Arrangement
If you have purchased a frost-resistant frame pool, you can improve its appearance in a way convenient for you. For example, decorate it with wood, arrange a small pebble or sandy beach around it. More expensive finishing options are ceramic tiles, porcelain stoneware or natural stone.
A practical option for finishing swimming pools is decking. It is durable, not afraid of getting wet due to moisture, and is resistant to bacteria, fungi and insects. At the same time, the terrace gloss has a presentable appearance.
A simple arrangement option that you can implement yourself is to organize a green lawn near the pool. Well-groomed grass will be pleasing to the eye, and water will naturally complement the beauty of natural greenery. Walking on such a surface is useful and pleasant.
Ladder
How to choose the right pool ladder
Despite the fact that a frame pool is quite durable, especially in comparison with an inflatable one, it is not recommended to lean on the sides of the structure. A ladder will help you get into the bowl. The choice depends on the depth and characteristics of the operation. The plastic version is quite suitable for children; the cost of such a solution starts from 500 rubles. If the pool is for adults, then aluminum
or
steel staircase
(from 1200 rub.).
Most often, attached
designs.
Their peculiarity is that they are quickly installed and, if necessary, moved to another location. Stationary
stairs are used for all-season pools.
The best solution for a seasonal bowl would be a U-shaped staircase
, it is secured with legs on both sides. In this case, there is no contact with the sides of the pool. You can often find cheaper A-shaped analogues in stores, but you shouldn’t buy them, they are less reliable.
When choosing a staircase, also pay attention to safety: steps and handrails should be non-slip, with anti-slip pads. The fastenings are reliable. High cost does not always guarantee quality; attention should be paid to the quality, reputation of the manufacturer, guarantees and certificates provided.
The best materials in terms of quality and reliability
Which frame pool is better to take for a summer residence - steel or plastic? The material of such pools depends on their purpose and type:
Lightweight rod models usually have a frame made of galvanized steel with powder or polymer anti-corrosion protection (the second is considered more reliable) and a bowl-cover made of PVC or polyester.
Three-layer reinforced coatings with a thickness of 0.3 mm or more have the best performance, but a number of manufacturers have films that are thinner or do not have additional layers.- Rigid, stable structures are made of plastic, aluminum or sheet steel and covered with multilayer PVC films.
Declared frost resistance does not always mean that frames can be used year-round; in most cases, this option simply allows for the possibility of placing a pool outside in winter without dismantling the frame, under conservation (i.e. needs clarification).But in any case, such models have enhanced anti-corrosion protection of the frame, and the coating of the bowl has double the thickness or is made of more plastic types of PVC.
The results of comparing the materials of the brands discussed above are shown in the table:
| Brand name | Bowl cover type | Basic frame type | Quality and reliability |
| Intex | SUPER-TOUGH technology, 2 layers of PVC, 1 polyester | Metal rods with reinforced powder protection, some models are reinforced with plastic sheets | Average |
| Bestway | Polyester reinforced with two layers of laminated PVC | ||
| Summer Escapes | Polyester+2 layers of PVC reinforcing mesh | Above average | |
| Azuro | Non-woven vinyl fabric, wall thickness from 0.3 mm, film thickness - 0.25, for frost-resistant models the film thickness is increased to 0.5 mm | Steel rods, sheets with six-layer protection for frost-resistant species | |
| GRE | Multilayer PVC with increased UV resistance, thickness from 0.3 to 0.5 mm. | Galvanized steel sheets with polymer coating, rigid frame | High |
| Atlantic Pool | Polymer film 0.3 mm | The same, with coating of chrome, vinyl and polymer enamel | Premium |
| Lagoon | PVC film 0.4 mm, with a pattern | Galvanized steel sheet 0.5 mm with polymer coating | Above average |
| Sapphire | Three-layer PVC with increased plasticity and operating temperature range from -50 to +70 ° C | Galvanized steel rods | Average |
If you doubt the quality of the material, you should pay attention to the durability and guarantees declared by the companies. For comparison, for swimming pools produced by Atlantic Pool, these terms reach 25 years; for Chinese and Russian manufacturers, the warranty does not exceed 3 years.
Filter selection
Why do you need a filter pump and how to choose it correctly
A swimming pool without a filter, unfortunately, will not bring joy. Stagnant water quickly “blooms” and an unpleasant odor appears. To equip a frame pool, cartridge and sand filters are used. They will help you avoid such troubles. There are also combined options.
Cartridge
The filter purifies water using paper cartridges. They need to be changed 2-3 times a week, the cost of a replacement unit is 100-500 rubles. The filter itself costs on average 1,500 rubles.
Sand
pass the water through special quartz sand (river sand is not suitable), which requires 10 kilograms per filter. Fortunately, the contents will have to be changed every 3-5 years. And the cost of sand is from 600 rubles per 25 kilograms. Quite an economical and effective option. But the filter pump costs from 7800 rubles.
Combined
the filter is the most expensive, from 13,000 rubles. This is a system of a filter pump and a chlorine generator; it not only purifies water, but also disinfects it. However, the use of such a filter does not replace the use of chemicals.
Regarding the power of the filter pump
, then it directly depends on the size of the pool.
Typically, the accompanying documents indicate the characteristics of the model and the expected volume of water. We recommend taking with a small reserve. You should also pay attention to the connection diameter
, it assumes two sizes: 32 and 38 mm. Ideally, they should match (at the pool and the filter), but if you happen to buy the wrong one, an adapter will solve the problem.
Pool care
Proper care of a frame pool
With proper care, a frame pool will last longer. Therefore, when choosing it, you need to worry about care tools in advance.
First of all, this is a skimmer
. Necessary for removing surface contaminants such as leaves, litter, midges. Mandatory for outdoor pools. There are built-in, wall-mounted and floating options. The last two are perfect for frame pools; they are relatively inexpensive and effective solutions.
To clean sediment you need a bottom vacuum cleaner
. The bottom cleaning kit consists of a brush, a hose about 5 meters long, a three-meter telescopic rod, a special tester and a thermometer. It will also allow you to clean the side edges.
We also advise you to immediately purchase an awning
for a frame pool. It protects the water from debris, dirty rainwater, prevents insects or animals from falling into the pool, reduces evaporation and maintains temperature. The awning is selected individually, depending on the type, shape of the bowl and the desired result.
Summer Escapes P20-1252
Best package
This pool is presented in the maximum configuration: ladder, awning, filter pump, skimmer, bedding. The owner will only need to buy chemicals and accessories that add comfort, but are not mandatory. Rating participant:
20 best pools for summer cottages
Choice of chemistry and rules of use
What chemicals are required for a swimming pool and how to use them correctly
Without chemicals, it is impossible to maintain the bacteriological purity of the pool. The necessary substances are sold in kits, and their use is limited to controlling the acidity level, adding chlorine-containing components and suppressing algae growth. To dissolve solids, use a special float, which is often combined with a thermometer.
Disinfection
allows you to destroy pathogenic bacteria and microorganisms.
Today there are preparations based on different substances: chlorine-containing
, active oxygen, bromine-containing.
The first ones are the most effective
, they allow you to get rid of most problems, oxidize organic matter and suppress the growth of bacteria. Oxygen preparations are the safest and most suitable for children's pools. Bromine-containing products are not used for outdoor bowls due to rapid decomposition under the influence of ultraviolet radiation.
Normalization of acid-base balance
necessary for comfort and safety. Indicators from 7 to 7.6 are considered normal; deviations negatively affect the skin and mucous membranes of a person. Measurements of the pH level must be carried out immediately after filling and then daily; special testers are used for this. Depending on the result, an acid-increasing or acid-lowering drug is added. You need to purchase both. To automate the process, you can use special dispensers with a built-in tester.
Unlike previous problems, algae
do not cause harm, but because of them the water becomes cloudy, acquires a greenish tint, and silt appears. Often disinfectants are not enough to combat them. We recommend purchasing an algaecide or its derivatives. Today it is the safest and most effective anti-algae remedy for humans.
Important! No matter how safe the chemistry is, the rules of use must be followed. Under no circumstances should you mix reagents; the treatment is step-by-step: we adjust the pH, disinfect, and destroy algae. The drugs should be stored in a tightly closed container, out of the reach of children and protected from the sun. Dosage strictly according to instructions, use only for its intended purpose.
Seasonality
What time of year will the pool be used
? You need to choose a pool taking into account the possibility of using it in winter. More precisely, it will be dismantled in the fall or mothballed, and it will wait for the next swimming season in assembled form.
Seasonal
frame pools are designed only for the summer period and must be dismantled at the end of the summer period. This is a cheaper option. Such structures, as a rule, have a lightweight frame and PVC film. The latter will have to be changed every year.
If the need to prepare the pool for winter does not frighten you, then we recommend purchasing a frost-resistant
model. They have a more durable, reinforced frame and a thick film made of polypropylene or polyester, which allows them to withstand negative temperatures.
A multi-season pool requires a more careful selection of the location for installation, since after installation it will remain there for many years. And such models serve for quite a long time, at least 15 years according to the manufacturers.
Bestway 56488
The best ratio of price and quality
The Bestway 56488 pool is well equipped and has a strong, collapsible rod frame. It has a long service life at a fairly moderate cost. Rating participant:
10 best frame pools from AliExpress
Bestway Steel Pro MAX 56026/56406
- diameter 305 cm, depth 76 cm;
- volume: 4678 l;
- packaged weight: 17.60 kg.
Prices in online stores
The Bestway 56406/56026 frame pool is highly durable and stable. The bowl is made of high-quality three-layer PVC: two layers of dense vinyl and one layer of polyester for special strength. The frame is stainless steel, galvanized.
No concreting or pit preparation is required; all that is needed is a flat, horizontal platform. The seasonal pool (it is recommended to disassemble it for the cold season) has a simple design - it can be easily disassembled and reassembled. The time to assemble and connect the pool is no more than 1-2 hours. A convenient drain valve allows you to attach a garden hose, which makes it possible to drain water anywhere.
Manufacturer
Which frame pool manufacturer is better to choose?
Today, many manufacturers offer their products. A frame pool is not a cheap purchase and, as a rule, the buyer expects a long service life. We recommend paying attention to proven and reliable brands and avoiding cheaper noname manufacturers.
Intex
is one of the most famous swimming pool manufacturers due to its affordable price and wide range of products. The pools are quite high quality and reliable. Wide range of models, any size and for any budget.
Bestway
is a Chinese brand that is no less popular in Russia. The manufacturer's pools are easy to install and maintain, safe and widely available in stores.
GRE
– manufacturer of frame pools from Spain. It mainly produces all-season models. The brand's pools are durable, but very expensive.
Chemoform AG
- German company. Pleases users with quality, a good selection of large sizes and a variety of shapes. The frame of these pools is very durable, with an anti-corrosion coating. More often there are models designed for full or partial burial.
Azuro
is a Czech company that produces durable frame pools suitable for use in any season. The manufacturer also provides a good selection of additional accessories.
Comparison of companies
The advantages and range of companies producing popular models of frame pools are presented in the table below:
| Company/brand name | Offered frame frame lines | Year of foundation or appearance on the Russian market | Competitive advantages | Flaws |
| Intex Development Co Ltd, China | Up to 55 units (10 universal + 4 children's rulers) of prefabricated frame structures of different sizes and shapes, with a volume from 1 to 54 m3 | 1964/ 2008 | The use of durable and UV-resistant film, low cost models, availability of accessories and ease of replacement | Lack of frost-resistant models |
| Bestway Group, China | Over 75 round, oval and rectangular summer pools installed on the ground | 1993 | Wide range of models, low cost | |
| Fluidra/GRE, Spain | Frost-resistant round and oval sheet frames, suitable for both installation on the ground and partial or complete burial | 1969 | Suitability for use in cold climates, strength, stability, original external finishing, over 100 models of different shapes and dimensions | High price, need to use branded accessories |
| Atlantic Pool, Canada | 1949 | High quality frame and coverings, aesthetics | Expensive | |
| Mountfield/Azuro, Czech Republic | 8 summer round models, from 35 round and 20 oval frost-resistant ground/dig-in models for cold climates | 1991 | High quality at an affordable price, good structural stability and bowl strength, aesthetic appearance | Limited selection of shapes, no corner designs available |
| Polygroup/ Summer Escapes, USA-PRC | Round and rectangular frames with a capacity from 6.3 to 24 m3 | 1989 | Wear resistance, variety of sizes, multi-stage quality control | Lack of frost-resistant frames, relatively thin bottom |
| Laguna pools/Laguna, Russia | Round and oval frost-resistant models with a rigid frame | 2014 | Variety of colors (9 coatings to choose from), accessibility, ease of maintenance, indiscriminate use in winter | Lack of rectangular shapes and children's models |
| Wellbot Universe LLC / Sapphire, Russia | Round and rectangular all-weather rod models | 2015 | Low cost, all-weather operation, 3 year warranty offered | Relatively short time on the market, certificates and specifications issued at the beginning of 2021 |
A comparison of the model range allows us to conclude that the best positions on the market are held by the brands Intex and Bestway , represented by both adult and children's frames of acceptable quality at an affordable price.
But if you need to buy a frost-resistant pool with a rigid sheet frame, you should choose between Azuro, Laguna pools and GRE products.
Comparison of frame and inflatable pools
Which pool is better to choose?
Today, stores have a large selection of pools for a summer house or country house for any budget. There are three types of pools: frame, inflatable and frame-inflatable. The latter are more expensive and are not very popular. Let's compare the two most popular types.
| Frame | Inflatable | |
| Price | 1.5-2 times more expensive than inflatable | Inexpensive |
| Strength | More durable design, stands firmly | Less durable, afraid of open fire, sharp objects and cold. You can’t lean on the sides at all, poor stability |
| Size | Largest size, suitable for large companies | More compact, more often aimed at families of 3-4 people |
| Installation | It is often necessary to level the surface and remove the slope; there must be a nearby power source (for the pump and other dependent devices). Installation and installation will take 2-3 hours | Minimal preparation of the site, the main thing is to remove stones and uneven areas. An inflatable pool can be brought into working order in half an hour |
| Life time | 6-7 years | 3-4 years |
Thus, a frame pool will be an excellent option for a summer house or a country house with permanent residence. It is more reliable and less demanding on operating conditions, and will last longer than an inflatable one. However, such a solution will cost on average twice as much.
Inflatable
Inflatable pools are different: in one case they are completely inflated, in another - the pool has an inflatable ring that rises as the bowl fills with water. The rest of the pool has no air. These pools are made from PVC.
Advantages
The advantages of such pools include low price, compact size when folded, which means convenient storage and transportation, and quick and easy installation.
Flaws
However, this type has its drawbacks: the likelihood of punctures or cuts, which means a short service life, the presence of electricity to use the pump, and manual draining of water. In addition, when pouring water into a pool with an inflatable ring, you must ensure that the bottom is tight, otherwise the pool may become warped. You cannot lean on the side of such a pool, otherwise it will sag and water will spill out. Such pools are suitable for temporary use only.
Top 5. Intex Prism Frame 26718
Rating (2021): 4.20
Intex Prism Frame 26718 is a fairly deep seasonal frame pool. The diameter of the bowl is 3.66 meters and its depth is 1.22 meters. This is an excellent solution for permanent residence in a country house. The model is designed for small groups or family vacations; you can not only sit and relax in it, but also swim. The pool is well equipped, the buyer receives a cartridge filter pump with a capacity of up to 3785 l/hour and a durable, stable ladder. Intex Prism Frame 26718 is easy to assemble, quite strong, will surely last 3-4 years, and with proper use and maintenance - guaranteed up to 6 years.
Characteristics:
25900 rub. / China / Dimensions: diameter 366 cm, depth 122 cm
Review of manufacturers and their products
Let's look at the best manufacturers of frame pools.
Intex
Global manufacturer of swimming pools and related accessories. Products are valued for their diversity, affordable cost and acceptable quality.
The Intex frame pool lines are represented by rectangular, round and oval rod models with a reinforced coating made of two layers of PVC and one outer layer of polyester, sold at prices from 7,000 to 99,000 rubles. Such pools are installed without strict requirements for the foundation and are assembled within 30-60 minutes.
An example of a model is a round pool Metal Frame 28202/56999 with a diameter of 305 cm, a side height of 76 cm and a volume of 4.485 m3. The frame of this pool is assembled from steel elements with reinforced powder anti-corrosion protection; the structure is reinforced with polypropylene tape around the perimeter. The starting price of the model when purchased in company stores is 12,400 rubles.
Bestway Group
Manufacturer of a proven brand of swimming pools with different dimensions, shapes and price ranges. The company produces seasonal frames with a capacity from 1.67 to 55.4 m3 at a price from 4,700 to 90,000 rubles; most models are supplied complete with cartridge or sand filters .
An example of a model is a rectangular pool Bestway Rectangular Power Steel Frame 56241/56456, 8.7 m3, 412×201 cm, depth 122 cm. This model is positioned as a pool for adults and is sold with a filter, pump and ladder at a price of 27,000 rubles. The outer side of the bowl has a non-marking gray color, the inner side is covered with a blue reflective film.
Lagoon
A Russian company that produces frost-resistant round and oval pools with a diameter from 3 to 7.3 m and sizes from 2 to 10 cm, respectively. All round structures can be used without being buried in the ground and can be moved to another location; the installation method is chosen by the owner.
All Laguna models have the same depth of 1.25 m. The price range varies from 25,000-100,000 rubles, models are supplied in any configuration, if necessary, with professional installation services when buried in the ground and a 1-year warranty.
In addition to the pool itself (rigid sheet frame and PVC film), the company separately produces replacement bowls for round and oval models of standard dimensions.
The Laguna round pool of 3.6 m, with a volume of 23.6 m3, has optimal performance. A set with a PVC bowl, guides, nozzle and skimmers costs the owners 36,500 rubles. The colors are chosen according to taste; swimming pools with a polymer coating imitating wild stone are in particular demand.
Atlantic Pool
A Canadian company that has been producing off-season frames with reinforced sheet frames for over 70 years. The Esprit, Esprit-Big and Gibraltar lines are represented by stable round and oval models that can be used without supports, even without being buried in the ground.
Atlantic Pool pools with a length of 2.4 to 10 m and a depth of up to 1.35 (volume up to 57.3 m3) are sold on the Russian market at a price of 91,000 rubles. The basic kit includes a ladder and a filtration system . The outer walls have an original pattern, imitating wood or marble.
A popular model is the J-4000 Gibraltar, a round pool with a diameter of 3.6 m, a depth of 135 cm and a capacity of 13.3 m3. Available at a price of 144,000 rubles, complete with built-in skimmers, sand filter and ladder.
Wellbot Universe LLC, Sapphire
A Russian company with production facilities in Ufa, producing round all-weather pools with a diameter from 1.2 to 9.85 m and a depth from 1 to 1.5 m and accepting orders for the production of rectangular models with a length from 1.8 to 4.5 m, width from 1.8 to 6.4, depth - 1.2 at a negotiated price.
The models have a rod frame; off-season use is ensured by the special properties of the bowl coating. In addition to swimming, Sapphire pools can be used as reservoirs for fish farming or water storage.
The best offer is a round Sapphire pool, “Standard” series, diameter and depth vary with a starting price of 9,400 rubles.
GRE
The Spanish brand GRE is a leader among sheet frost-resistant prefabricated frame models. The market offers GRE pools of any shape with a volume of 11 m3 and up at prices starting from 58,000 rubles.
GRE lines are valued for their aesthetic and original appearance (the outer sides can be single-color or imitate natural materials - stone, rattan, wood), increased wall strength and consistent quality.
The round pool GRE Mauritus PR358MAG, 3.5x1.32 m, volume 11.25 m3 has the optimal ratio of price, capacity and quality. The model is supplied at a price of 66,000 rubles and is operated without side supports, after installation on the ground, partial or complete digging.
Azuro
The Czech company Mountfield occupies a leading position in the market of garden equipment, furniture and swimming pools. Russian consumers are well aware of their Azuro brand and line of round seasonal and frost-resistant pools.
The former have a volume of 4 to 15 m3 and are sold at prices from 20,500 to 31,000 rubles. The latter can be installed on the surface or dug into the ground with volumes from 11 to 45 m3 and a cost of 40,200 rubles.
All Azuro models are made of steel with six-layer corrosion protection and are characterized by increased stability and strength.
The top sales are headed by the 9-cubic-meter blue pool Azuro 300A with a depth of 90 cm and a diameter of 3.06 m. The model is both above-ground and in-ground (but not frost-resistant) and is sold complete with a stepladder at a price of 25,200 rubles. In addition to its stability, the model is valued for its attractive appearance and reflective film effect.
Polygroup, Summer Escapes
A global concern specializing in the development of new designs and production of stationary and collapsible swimming pools, play centers and inflatable products. The Summer Escapes and Summer Waves frame lines feature ground rod models with steel bodies and three-ply bowl covers.
The price of pools depends on the basic configuration; the starting price of the smallest round pool without stairs and accessories is 9,200 rubles. Summer Escapes rectangular pools are more expensive and are sold at a price of 43,000 rubles.
The capacious round pool Summer Escapes P20-1552 has the maximum rating, with a diameter of 4.57 m, a depth of 132 cm and a volume of 18.43 m. The bowl is made of two layers of PVC and one of polyester and is equipped with a convenient hose for draining water from the pool. Basic cost without stairs and accessories – 18,700 rubles.
Top 4. Summer Escapes P20-1252
Rating (2021): 4.50
Summer Escapes P20-1252 is a pool for those who need a deeper pool, but don’t want to deepen it or install a stationary model. The depth of the pool is 1.32 meters, which is enough for swimming or sliding. The diameter is 3.66 meters, the bowl can accommodate a group of 4-6 people for a holiday. The model comes in an expanded configuration; after purchase, the user receives a full set of necessary accessories. The owners also note a strong frame, but a thin bottom. You cannot do without a substrate; you will also have to pay more attention to preparing the area for the pool.
Characteristics:
31190 rub. / USA (manufactured in China) / Size: diameter 366 cm, depth 132 cm
Top 3. Bestway 56488
Rating (2021): 4.60
Bestway 56488 is an excellent solution for family vacations and small companies. A moderately deep round pool with a diameter of 4.35 meters is designed for 8-10 people. The bowl holds almost 15 liters of water. The model is well equipped, there is an awning, a filter pump (cartridge) with a capacity of up to 3000 l/hour, and a ladder. In fact, the buyer receives most of the necessary accessories; there is very little left to buy. Bestway 56488 is quite popular due to its affordable cost, sustainability and high quality. The collapsible model will surely serve for more than one season.
Characteristics:
29592 rub. / China / Dimensions: diameter 457 cm, depth 107 cm
Bestway Steel Pro MAX 56059/56408
- diameter 305 cm, depth 76 cm;
- volume: 4678 l;
- included: water pump, cartridge filter;
- packaged weight: 19.20 kg.
Prices in online stores
The Bestway 56059/56408 frame pool is highly durable and stable. The bowl is made of high-quality three-layer PVC: two layers of dense vinyl and a polyester mesh between them for special strength. The outside color of the pool bowl is light gray, the inside surface has a mosaic coloring. The frame is metal, covered with a layer of plastic that prevents corrosion.
The delivery set includes a filter pump with a capacity of 1249 l/h for water purification and circulation, as well as a cartridge, hoses and clamps necessary for connection to the pool.
Top 2. GRE KITPROV738WO
Rating (2021): 4.90
The GRE KITPROV738WO swimming pool will be appreciated by lovers of active recreation on the water. Its size will allow you not only to relax with a very large group, but also to organize small swimming competitions. At the same time, the owners appreciated the design of the structure, the quality of materials, and the strong foundation. Despite its impressive dimensions, the pool is easy to install. The main task is to allocate space on the site, and two people can easily handle the assembly. The model is frost-resistant; it does not need to be assembled for the winter. The only thing that causes dissatisfaction on the part of buyers is the high cost of the GRE KITPROV738WO.
Characteristics:
190790 rub. / Spain / Dimensions: length 730 cm, width 375 cm, depth 132 cm
The smallest and largest model on the market
Let's consider the models of frame pools that are at the beginning and end of the list in size.
Small
The smallest model is Intex Mini Frame 57172 . This is a small square-shaped bowl, with a side length of 122 cm and a depth of 30 cm. It holds only 337 liters of water and is intended for bathing children from 3 years old.
The average price of this pool is 1800 rubles.
Big
The largest frame pool intended for use on the site of a private house is the Intex Ultra XTR Rectangular Frame 26378 model.
This is a rectangular structure with a length of 9.75 m, a width of 4.88 m and a depth of 1.32 m. This pool is close in size to permanent structures and can be used for swimming or playing various games.
The cost of the kit is about 100,000 rubles.
