Washing machine under the sink - all the nuances of choosing a model, connection and placement

In small typical bathrooms, large appliances take up the lion's share of free space. At the same time, it can take up storage space, make it difficult to get to the shower, and cause many other problems. We have to come up with alternative options: for example, taking the device out into the hallway or into the kitchen. In this article we talk about an interesting solution for small apartments - placing a sink above the washing machine: what are the pros and cons, how to choose and what to consider during installation.

Installing a washing machine under the sink: pros and cons

People who decide to purchase a sink to install above a washing machine are primarily interested in the advantages of such a plumbing trick and its disadvantages. But most of all they are interested in reviews from owners about the merits of the machine, as the main component of such a design. Let's start with the shortcomings.

The disadvantages of an under-sink washing machine are:

1. Limited movement while in the bathroom, as the sharp corners of the machine protrude from behind the sink and there is a risk of slight injury. From a safety point of view, experts recommend buying a washing machine under the sink with a depth of up to 45 cm;
2. The machine is inconvenient to use, as the approach to it can be cluttered;
3. The need to purchase a special siphon for such a design, since the necessary devices are not included in standard kits;
4. The problem of selecting the height and width of the machine. Often equipment of an acceptable size cannot be found in stores. For example, standard 85 cm high and 36 cm deep washers optimize space, but have a huge disadvantage - the sink is raised to a height of up to 100 cm. It will be extremely inconvenient for a child or a small person to use the sink.

The advantages of such a combined installation are:

1. Saving space in the bathroom;
2. The location of the machine under the sink ensures its good stability, which extends its service life;
3. Aesthetic appearance of the room.

A sink above the washing machine will allow you to properly organize your bathroom workspace.

Advantages and disadvantages of a twin installation

The main advantage of placing a washing machine under the sink is saving bathroom space, which is especially important in small bathrooms. In fact, this is where the advantages of such installation end.

The disadvantages of this method of arrangement include the following factors:

• It is necessary to select special models of household appliances and sinks intended for joint installation.
• Certain installation difficulties due to the specific design of the equipment.
• If the siphon or sink is damaged, water may enter the washing machine, which will cause its failure.
• The siphon has a flat design, which makes its replacement problematic: such products are not sold separately. Also, due to design features and installation errors, the water from the bowl often does not drain completely, so the remaining water has to be removed with a rag.

Note! Special compact models of washing machines with a maximum load of 3–4 kg are installed under the washbasin. This is not suitable for all families, especially those with large numbers of people living together.

It is for these reasons that installation of a washing machine under a washbasin is chosen in cases where there are no other options for rational placement of equipment.

How to choose the right washing machine for the sink?

In order to choose the right washing machine for the sink, you first need to choose the sink itself – the water lily. Only after this should you start searching for equipment.

First, let’s find out what types of under-sink washing machines are available. Plumbing equipment specialists distinguish two main types of such equipment:

• Narrow cars of standard height;
• Small washing machines designed specifically for the sink.

The last category of devices under the sink has a base height of up to 70 cm. Such machines are installed under the sink - water lily. At the same time, the water lily retains its standard height - 85 cm. This option is suitable for families where all or most family members are of average or short height.

The first option is less comfortable. Since narrow washing machines are difficult to install under the sink and can create a lot of inconvenience for owners throughout their entire operation.

To decide on the choice of a high-quality washing machine under the sink, it is worth studying the market well.

You need to understand that such small devices, of course, have limitations in capacity. Most often it is limited to 3-3.5 kg of laundry. If this is not enough, you can try to pick up a regular car. At the same time, you need to remember that it should be low and necessarily narrow.

An analysis of the information showed that the market for electrical appliances for the bathroom is dominated by 4 brands of washing machines under the sink:

1. Swiss Eurosoba – price, quality and warranty for up to 15 years;
2. Italian Candy – multifunctional, average price;
3. Swedish Elektrolux - ease of operation, minimal breakdown rate;
4. Italian Zanussi – Italian quality without significant bells and whistles.

Depending on the model and functionality of the machine, you can purchase such equipment in the price range from 20 to 65 thousand. rubles

Popular manufacturers and models: TOP-6

The choice of small-sized washing machines is varied, as each manufacturer tries to offer customers as many modifications as possible. Only popular brands have established the production of such equipment.

This is due to the complexity of designing devices that combine compactness, impeccable quality and decent performance characteristics. We have compiled the top appliances that can be built under the sink.

CANDY 1D1035 — 17,000 rub.

The CANDY 1D1035 device fits perfectly into a small room. There are rubberized supports with adjustment, making the machine stable during operation. The build quality is high, all electronic components are in protective boxes.

The advantages include stylish design, economical energy consumption, choice of spin speed, temperature control, foam level control and plastic resistance to stress.

1. free-standing;
2. frontal;
3. loading – 3.5 kg;
4. energy efficiency class – A;
5. rotation speed – 1000 rpm;
6. programs – 16;
7. dimensions – 51x46x70 cm.

Zanussi ZWSG 7101 VS - 20,000 rub.

The narrow Zanussi ZWSG 7101 VS washing machine looks small, but holds a lot of laundry. The larger door makes loading and unloading easier. The QuickWash function reduces washing time by 50%.

There is a wash end signal, temperature selection, partial protection against leaks, protection against children and imbalance, control of foam level and imbalance.

• free-standing;
• frontal;
• loading – 6 kg;
• energy efficiency class – A++;
• rotation speed – 1000 rpm;
• programs – 14;
• dimensions – 60x38x85 cm.

Zanussi FCS 1020 C — 37,000 rub.

The small model Zanussi FCS 1020 C under the sink is suitable for installation in a small kitchen. It has electronic control and a standard set of programs.

Despite its compact size, the machine washes, rinses and spins just as well as full-size machines. At the same time, it consumes much less water and electricity.

1. free-standing;
2. frontal;
3. loading – 3 kg;
4. energy efficiency class – A;
5. rotation speed – 1000 rpm;
6. programs – 15;
7. dimensions – 50x58x67 cm.

Electrolux EWC 1350 - 50,000 rub.

Excellent machine Electrolux EWC 1350 for a washbasin with a full set of programs and options. Buyers like it for its spin quality, low electricity consumption, low water consumption and rubberized supports that absorb vibration.

Internal parts are made of impact-resistant plastic and steel. There is a delay start, a timer, an option to prevent creasing, setting the end of the wash, and monitoring imbalance and foam level.

• free-standing;
• frontal;
• loading – 3 kg;
• energy efficiency class – A;
• rotation speed – 1300 rpm;
• programs – 8;
• dimensions – 50x51x67 cm.

Eyelid WRS 44P1 BWW — 14,000 rub.

A good washing machine Veko WRS 44P1 BWW has a child lock and a delayed start function for 3, 6 and 9 hours.

The imbalance control system and foam level control are responsible for low noise and vibration levels and safe operation of the device. There are many different programs, including a mode for washing down jackets.

1. free-standing;
2. frontal;
3. loading – 4 kg;
4. energy efficiency class – A;
5. rotation speed – 800 rpm;
6. programs – 15;
7. dimensions – 60x37x84 cm.

LG F-​1096ND3 — 24,000 rub.

The compact LG F-1096ND3 machine is equipped with simple electronic controls and a digital information display. It can operate in different modes, which makes it easy to select a program for a specific type of fabric.

During one cycle, the device consumes a little electricity and water. There is protection for the housing against leaks, a door lock, and a foam formation control system. The model has a low noise level during washing and spinning.

• free-standing;
• frontal;
• loading – 6 kg;
• energy efficiency class – A+;
• rotation speed – 1000 rpm;
• programs – 13;
• dimensions – 60x44x85 cm.

Source: https://make-a-choice.ru/stiralnaya-mashina-pod-rakovinu-v-vannoy-komnate-obzor-malogabaritnyh-modeley/

What to look for when buying a sink

You should choose a sink with a bowl of shallow depth, which may vary. In each case it must be selected individually. An excessively deep sink will “eat up” the free space for installing a washing machine. At the same time, a flat sink above the washing machine is very inconvenient. It practically does not stop splashes of water that will fall on the electrical appliance, which is extremely undesirable. Another important characteristic is the size of the device. The sink must cover the washing machine and overlap its upper surface on each side by at least 20 mm.

There should be free space between the sink and the washing machine.

The washbasin, designed for installation above the washing machine, is equipped with a special drainage system. Experts prohibit placing the drain pipe above the machine, as this is electrically dangerous. Therefore, the drainage system in the “water lilies” is located behind the device. Two types of devices are available: with horizontal and vertical drainage. The second provides faster drainage and less clogging. While the first requires frequent cleaning and rinsing. But it is precisely this design, according to experts, that is the safest.

The sink above the washing machine can be equipped with a drain-overflow system. This is not only convenient, but also necessary for such systems, because there is an electrical appliance under the sink. You can find designs with and without plugs on sale, and there are both manual and automatic models. There may also be or be no hole for the mixer. In the second case, it becomes possible to mount the drain as close to the wall as possible. The material from which the products are made is also varied.

The most common are earthenware and plastic sinks. However, recently “marble water lilies” have appeared, made of polymer concrete using the vibration casting method.

This type of plumbing may have an offset drain and a countertop under the sink. The dimensions of the sink are selected taking into account the specifics of the room. If the bathroom is spacious enough, the use of large structures with good depth is allowed.

Depending on the type of water drainage, the following varieties of “Water Lilies” are distinguished:

• with side drain;
• with vertical drain;
• with horizontal drain.

The latest models are in demand when combining a sink with a washing machine, but they have the following disadvantages:

• with horizontal drainage, the likelihood of pipe clogging becomes high;
• the speed of water passage is reduced;
• choosing a siphon can take a lot of time, because... choosing the optimal design can be difficult.

Classic products with a vertical drain type are more convenient, but they are not suitable for installation above a washing machine, because... Leaked liquid may end up on electrical wiring and cause a short circuit.

Water lily sinks rarely come with a faucet hole. You have to arrange it yourself.

The shape and color of the sink can be any

In order not to make a mistake, you need to add the height of the sink to the height of the car you like and another 10-15 cm for the required distance between them. The resulting value will show at what distance from the floor the top edge of the sink will be. Ideally it will be 80 cm or slightly higher. The last option will be especially convenient for tall people. If the calculated value is significantly larger, you should choose another model or think about equipping a small stand for washing.

Some companies produce washing machine models that can be purchased complete with a bowl. This solution can be considered ideal.

The “Kuvshinka-Mini” sink can only be installed on a narrow washing machine with a depth of 32-36 cm.

Due to the maximum filling of the space under the washbasin, you will not be able to stand comfortably near it - the body of the washing machine will interfere with your legs. If you noticed, all designs of washbasins with cabinets are equipped with high legs, the free space under which, as well as the reduced depth of the cabinets, allows you to get as close as possible. In our case, this will not be possible, so to ensure the required comfort, try to find a sink that protrudes forward as much as possible in relation to the washing machine.

Optimal height for installation

According to SP 73.13330.2016, which is an updated edition of SNiP 3.05.01–85, the recommended installation height to the top edge of the side of sinks, sinks and washbasins is 800–850 mm. This height is considered universal, as it is suitable for people of different heights. It is at this level that sinks are installed in new buildings.

But when installing plumbing fixtures yourself, you can deviate from the recommended parameters and take into account the anthropometric parameters of the family. So, if all family members are tall, it will be more convenient to install the sink a little higher (860–930 mm), and if you are short, the washbasin can be lowered a little.

Sink installation parameters recommended by building codes.

Note! If the bathroom area allows, then it is recommended to install a separate washbasin for children, which is located at a height of 400–600 mm.

The optimal height for a children's sink is 40–60 cm.
The installation height of the mirror depends on its size and shape. The basic rule that is taken into account is that the mirror should provide maximum visibility and comfort during operation.

Features of installing a sink above the machine

It is recommended to install washing machines under the sink subject to the following conditions:

1. The machine must be protected from water, dust and other objects. Electricity, in turn, must be isolated from the possibility of water entering from the machine.
2. The recommended width of the sink should be approximately 58 cm if there is a sewer pipe, and 50 cm if not.
3. Sink pipes must not be placed above the machine. During spin operation, the machine can destroy the structure and cause water to enter the top;
4. The surface on which the washing machine will be installed must be flat or have a special mat;
5. Installation of the sink above the machine must be carried out using the brackets that are included in the kit. They ensure reliable fastening of the water lily and plumbing pipes.
6. Installation of the washing machine is carried out according to the instructions while observing safety precautions.

You will need a shell model called a “water lily”. Its flat shape not only improves aesthetic perception, but also allows you to install the device at the required height. It goes without saying that the option with this arrangement of equipment is only possible if you are using a front-loading washing machine.

Diagram of the correct placement of the sink above the washing machine

To install a sink on the “second floor” you need a special flat siphon with a rear outlet. Often the product is equipped with such a device. If you overlooked it and purchased a “water lily” without a siphon, you will have to run around - a drain of this type is a specific product and will not be easy to find.

The washing machine must not be allowed to protrude from the front of the washbasin. This is both inconvenient and unsafe.

After connecting and checking the sink and mixer, carefully push the washing machine into the resulting niche. Did you manage to hide communications in the wall? Then you can safely place the equipment close to it.

The last step is to strengthen the connections with a clamp. It will prevent unexpected thread breakage during pressure surges, increased flow rates and intensive draining. Before use, check the tightness again.

Installation instructions for water lily shell

Before starting installation, check the package contents. Some models are supplied without brackets, anchors or dowels with screws for fastening. It is advisable to purchase sinks with brackets: it can be difficult to choose the right shape. If there is no siphon, buy separately. It must match the type and shape of the drain hole.

The tools you will need are an electric drill with a concrete drill, a tape measure, a level, a hammer, wrenches or a screwdriver (depending on the type of dowels). It is recommended to seal horizontal drains with sealant. Work is performed in a clear sequence.

Marking the wall for mounting the bowl

When starting to install the sink, set the machine in place. A 2-3 cm thick plate, for example polystyrene foam, is placed on the top panel. This will provide the necessary clearance. The washbasin is installed and an assistant holds it. Marks are placed on the wall for future holes for mounting brackets. For the support hook, the attachment location is also marked.

It is necessary to prepare the wall on which the washbasin mounts will be mounted.

The unit is removed from the installation site so as not to be accidentally damaged during operation. Holes for anchors are drilled in the marked places. For brick and concrete, you will need drills with a Pobedit tip and an electric drill. You won't be able to make a hole with a hand tool or a metal drill. The drill is selected according to the diameter of the anchor (dowel).

Reinstalling the bowl

Bolts are inserted into the holes made and brackets are hung. Tighten the anchor nuts, but do not tighten them too much. Leave 0.5 cm to secure the washbasin. Sealant is applied to its back wall 1 cm along the upper edge. The brackets are treated in the same way at the points of contact with the washbasin. Install the bowl with the eyes on the brackets and tighten the anchor bolts.

Some sink models are equipped with a support hook. It is inserted into the technological hole, the second end is screwed to the wall until it stops.

Assembling and connecting the siphon

The siphon has few parts, assembly will not cause any difficulties. Follow the manufacturer's instructions, not forgetting the rubber gaskets. It is advisable to coat the threads and seals with sealant to increase the reliability of the connections and prevent leakage. The product is fragile, do not use excessive force to avoid breaking it.

After connecting the sink, the functionality of the siphon is checked.

The assembled siphon is installed:

1. The product is placed at the bottom of the drain hole.
2. A gasket is placed between the siphon and the bottom of the sink.
3. A seal is placed inside the bowl.
4. A grate is placed above.

Depending on the design of the siphon, the parts are fastened with a bolt or screwed onto the thread in the product.

A drain hose is connected to the nozzle. Plumbers recommend making a smooth bend from corrugation next to the siphon, which will act as an additional water seal. In the siphon of the water lily, it often breaks off, and odors from the sewer penetrate. The hose is fixed using electrical tape or soft wire. The second end of the drain hose is connected to the sewer pipe.

If the sink design has a hole for the faucet, install it. A sealant is placed underneath the bowl, then a washer, and pressed with a nut.

When to install a siphon or mixer depends on the design of the sink. It is more convenient to do the work when the water lily is not secured to the brackets. Drain the water, checking the tightness of the connections.

Having completed the installation, put the machine in place, adjust the legs, achieving stability.

How to make a sink over a washing machine.

As for the installation sequence, the sink is installed first, and then the washing machine. Typically, a water lily sink comes with brackets for installing it on the wall. However, if you are installing a new sink in place of an old one, we recommend using the existing brackets. The fact is that the “original” brackets installed during the construction of the house are much more reliable than new ones.

First, markings are made, then the brackets are mounted. The bolts are not fully tightened, but leave gaps of up to 7 mm. The bowl is installed on brackets and fixed to the wall with a special metal hook. The hook is included in the kit; an additional technological hole is made for it. The dowel that secures the hook is screwed in until it stops. Silicone sealant is applied to the back wall of the sink, this protects the tiles from damage. It would also be a good idea to apply sealant to those areas of the sink that come into contact with the brackets.

The sink is installed on brackets with connected communications

The gaps in the places where the brackets are attached are made in order to carry out high-quality installation of the siphon without any problems. We connect the drain hose of the washing machine to the siphon pipe. The connection point can be secured with a clamp for reliability. We connect the corrugation to the sewer drain.

You also assemble the siphon according to the diagram attached to it by the manufacturer:

1. We connect the siphon to the sink mounted on the wall.
2. The kit always includes special silicone gaskets that ensure the tightness of the structure, but for reliability, coat the joints with silicone as well. After all, it is planned to install an electrical appliance under the sink.
3. If the “water lily” has an overflow system, we also connect it to the siphon.
4. We connect the structure to the sewer system.
5. We check the tightness: we pass water through the system. We tighten all the bolts and take additional measures to seal the device.

Make sure that the flat siphon does not lie on the machine and does not have points of contact with it, since even with complete sealing it is not free from condensation, which is dangerous for electronics

The mixer is installed after the final fixation of the brackets. This usually needs to be purchased separately, but in some cases you can find a lily pad sink that comes with a faucet. Cold and hot water supply pipes are connected to the tap.

When installing the mixer on the “water lily”, do not forget to leave a gap behind the machine to make the necessary flexible water supply

After connecting all communications, the washing machine is installed in place. If you need to install the machine close to the wall, the pipe system can be built-in.

It is possible to install a common mixer for the sink and bathtub. In this case, the mixer is mounted on the bathtub. Make sure that the spout moves freely towards the sink.

The sink should slightly overlap the edge of the bathtub

After completing installation work, be sure to check all connections of plumbing elements. Even the slightest leak can lead to a dangerous situation - electric shock, or failure of the washing machine.

A sink over a washing machine is an ideal solution for small bathrooms. Take care of the careful selection of plumbing equipment and appliances, as well as high-quality installation. Then the system will be durable, and its operation will be comfortable and safe. Experts do not recommend installing the sink directly on the machine, since during the spin cycle it can simply tear off the washbasin fastenings. Even if you did everything correctly and the vibration level of household appliances is very low, you should not experiment.

Choosing the size and shape of the washbasin

Before choosing a sink, make preliminary measurements:

• width and depth of the apparatus;
• space behind the equipment required for draining;
• protrusion of the washbasin beyond the boundaries of the machine.

The dimensions of the water lily should exceed the dimensions of the machine by 2-5 cm, following its contours. The projections block splashes of water from accessing the instrument panels.

Joint installation of plumbing fixtures and machines is only possible using a water lily sink. A standard wall-mounted washbasin is not suitable in size and shape.

Models differ by criteria:

1. Drain direction. The rear-oriented horizontal one gets clogged more often, but is located far from the unit, which increases electrical safety. The vertical one, located above the machine, drains water well, but a leak threatens to cause a short circuit.
2. Shape. Rectangular, round, square, and non-standard water lilies are produced.
3. Type of construction. Available for installation in a countertop, without space for a faucet, with or without an overflow.

The most convenient models for installation above the machine are those with a bowl depth of no more than 20 cm.

Rectangular shape

Rectangular water lilies are in greatest demand as they follow the contours of the machine, providing maximum protection from splashes.

Today there is a large selection of rectangular models.

Customer reviews have brought the following models to the top:

• "Aesthete" Lea 60;
• Andrea Comfort 600;
• Santek "Pilot-60";
• Santek "Pilot-50";
• "Water Lily Elegance"

The artificial stone sink “Estet” Lea 60 with a side length of 60 cm is made of artificial raw materials. White color harmonizes with the design of any bathroom. The surface is easy to clean, but quickly becomes dirty with plaque. There is a hole in the center for the mixer. The convenient design of the siphon allows you to simultaneously drain water from the sink and machine. The streamlined shape of the bowl with a depth of only 10 cm prevents water from stagnating. The drain is covered by a removable soap dish. For suspended installation it is equipped with brackets.

The Andrea Comfort 600 washbasin is designed for installation above compact units with a depth of no more than 45 cm. The product is made of artificial marble and covered with a white protective film. There is a hole for mounting the mixer and mounting material. The drain is hidden behind a soap dish. Users note the unreliability of fastening, easy installation, and affordable price.

The faience washbasin Santek “Pilot-60” is mounted on the countertop. A square bowl 62x62 cm, 20 cm deep. The necessary accessories are placed on the sides. Attractive looking, but the model is bulky and heavy. There is a hole for a faucet. Siphon is not included. Attractive at affordable price, 5-year warranty.

The Santek “Pilot-50” washbasin with rounded corners is an elegant porcelain model. Size 60x50 cm, bowl 18 cm.

Light weight, good quality, low price. The enamel is easily washed off from plaque, but the surface quickly becomes dull. The hole for the mixer is located in the center. Sold with bracket and siphon.

The “Water Lily Elegance” sink, square 60x60 cm, is installed above machines with a depth of no more than 46 cm, a maximum height of 73 cm. The bowl is 14 cm deep. Made of earthenware, the coating is snow-white, durable. Installation of a mixer is not provided; it is assumed that it will be used in common with the bathroom. Equipped with a full set of additional devices and fasteners: siphon, plug, dowels, brackets. You can connect a washing machine to the siphon. Buyers note the difficulty of installation.

Semicircular shape

Washbasins of semicircular and oval shapes smooth out the corners, making them more injury-resistant to use.

A semicircular countertop sink can successfully complement a classic-style bathroom.

“Water Lily Lux-Light”, 62 cm wide, 60 cm deep with a rounded bowl 14 cm high, fits perfectly into the interior of a small bathroom. A model made of earthenware or porcelain is mounted on the wall using a bracket. The sides are not wide enough for convenient placement of accessories. The mixer is installed in the hole in the center. Equipped with a siphon.

The “Kuvshinka Light” sink is designed for installation above a narrow washing machine. The depth of the bowl is 14 cm, width, height - 61 and 60 cm, respectively. Made from high-quality earthenware, the surface is easy to clean. There is no hole for the mixer; it is operated with a common rotary one.

Comes with everything necessary for installation. Rarely found on sale, more expensive than analogues.

Non-standard shape

The shape of the sink can be non-standard. Models differ in the installation of the mixer in the corner or the location of the countertop on the side. The unusual shapes of the products bring novelty and freshness to the bathroom interior.

Figured sinks belong to a number of non-standard shapes.

53.5 cm “Water Lily Compact”

The custom-shaped porcelain sink features a faucet located at the left corner of the back wall. There is 1 hole, the place for the second is marked. The bowl is 53.5 cm wide, suitable for small washing machines. Washbasin height 14 cm, depth 56 cm. The only model in Russia that can be mounted above a washing machine along with a shower box. Brackets are used for wall mounting. It is recommended to hire a specialist for installation.

63.5 cm “Water Lily Dial”

Graceful shapes give the impression that the faience sink is made of porcelain. The design allows you to install the sink in any corner: the mixer can be mounted on the left or right. The holes for it are ready. Suitable for use with a machine whose depth does not exceed 46 cm. Dimensions 63.5x57 cm, bowl depth 14 cm.

The Water Lily Dial sink is produced in limited quantities.

64 cm “Water Lily Bolero”

The ceramic washbasin is light and airy and impresses with its perfect shape. The attractive design of the premium model in Art Nouveau style harmonizes with a modern interior. The hole for the mixer is located on the left, for the drain - in the center. The dimensions of the sink are 64x60 cm, the height of the bowl is 15 cm. The non-standard shape provides a convenient approach to the sink: the legs do not rest against the machine if it is up to 46 cm deep. The coating is made of high-quality enamel, but it quickly gets dirty due to the specific shape of the bowl. Sold with bracket, siphon.

What kind of sinks are they: prices, types, sizes

They differ from ordinary sinks above the washing machine in the type of drain. There are 2 options:

• Below the washbasin. The drain is also located and attached at the bottom of the sink, only unlike a conventional siphon, the drain of this option immediately bends and goes to the side.
• On the side of the sink. Here the drain hole is not located at the bottom, but on the side.

There is an option where the machine is installed not under the sink itself, but under its countertop. This type is suitable for those who do not have a shortage of space.

The size of the sinks above the machine is usually 50*60 or 60*60. These dimensions are due to the fact that the width of a standard washing machine is about 60 centimeters. The only difference is the depth. There are non-standard forms, but this is rather an exception. Products with a table top can be up to 1.5 meters wide. The color and shape of the products may also vary. Prices for products vary depending on the country of production, shape and color.

The most famous Russian manufacturer of such washbasins is Santek. They have products in popular sizes (50*60 and 60*60) with a drain at the bottom. Inexpensive, affordable sinks within 5,000 rubles. You can find it in a regular plumbing store. There are other Russian manufacturers, but they are less known. Products from foreign companies (for example, Poland, Latvia) are much more expensive. Here you will have to shell out 10,000 rubles. And you can only find foreign goods on the Internet.

When incorporating a similar design into the design of a future bathtub, it is worth assessing all the advantages and disadvantages of such a solution.

Creative bathroom sinks. Photo selection

In conclusion, we offer interesting design options for washbasins. Perhaps they will inspire someone to create something similar in their home.

Sink materials

The newest material, which has already gained popularity in the plumbing market, is polymer concrete, from which “water lilies” are made, built above the washing machine. This material can withstand any impact well and is insensitive to household chemicals, which is very important for a bath. A big advantage is the ability to imitate different types of natural stone. Products made from polymer concrete are so similar to stone that not everyone can tell the difference.

If you want to buy something special, then you can buy a sink made from other materials for the bathroom. The most popular will be glass, acrylic, metal and ceramic variations. Since the product is essentially made from artificial stone, its cost is lower than from natural components, which makes it more affordable.

Not only the material can be different, but also the shape. The most popular of which is rectangular, but it can also be oval or square, which primarily depends on the dimensions of the washing machine. The corners of such products can be sharp or rounded. For lovers of unusual shapes, there are also original examples of bizarre configurations.

By color, you can choose a product that will match the color scheme of the room, machine or any other element of the room

It’s very convenient to hide all water and sewer lines behind a false wall and add some useful space in the form of a countertop

The main advantages of wall-hung sinks

• ease of cleaning under the washbasin;
• ease of construction, not only actual, but also visual;
• functionality of plumbing, because such a sink can be mounted at any height;
• the ability to disguise communications behind a false wall.

The sink above the bath is an original and functional solution that effectively saves space. However, achieving a good look requires careful and thoughtful planning.

This is the most ergonomic sink, since to install it you just need to choose any empty corner in the bathroom.

Kitchen placement option

Another common location for installing a washing machine is the kitchen. In this case, in order to save space for other appliances, the question arises of installing the machine and sink under one countertop. This type of installation is called built-in.

This placement of devices looks quite interesting in the interior, since the design of countertops and cabinets can be varied. The advantage of this placement is that it is not necessary to look for a washing machine that is suitable in both size and design. The design of the countertops may contain doors that will close the washing machine when it is not in use, which means it will not be visible at all. And due to the fact that countertops of such designs are made from a wide variety of materials, it can become the highlight of the entire interior, both in the kitchen and in a spacious bathroom.

The most common materials for making countertops are:

• Glass;
• Stone;
• Treated wood.

Having a countertop above the washing machine has significant advantages. You can place jars, hygiene products or other not-so-resistant things on top. During operation, the machine creates vibrations, and the tabletop increases the amount of usable space. This advantage also applies when placing the machine under the countertop in the kitchen. A tabletop is an excellent addition to the interior; it can also help create a more cohesive space by visually connecting interior details into a single whole.

Choosing a place

As a rule, there is a single sewer system between the bathroom and the toilet. Changing the location of the pipeline in an apartment is quite difficult, but possible.

When choosing a place for the sink, you need to take into account its size and the dimensions of the washing machine. You should also evaluate the possibility of moving equipment around the premises in case repair work is necessary. The installation process should also not be complicated by limited space.

You should not place the design of a washing machine with a compact water lily in the kitchen. Washing dishes in a flat sink is inconvenient.

Installation Guide for Undermount Sink

If you choose to install a washbasin with a countertop, the main work consists of preparing the base.

Preparing the template and base

Some manufacturers supply a template for marking the countertop along with the sink. If it is missing, make it yourself. Place the washbasin on cardboard with the bottom up and trace the contours with a pencil.

Further actions depend on the installation method. If you plan to place the sink flush with the countertop, the template is ready and cut out. When planning to install on top of a countertop, measure the width of the sides of the washbasin. Step back from the edges of the template to such a distance and draw a line.

Make markings on the tabletop according to the template. 1 hole is drilled on the line, a jigsaw file is inserted, and the tool is turned on. After cutting the hole, sand the edges with sandpaper. Apply sealant liberally to a smooth surface and level it with a spatula. While the surface is wet, apply sealing tape.

Reinstalling the sink

The hole in the countertop is treated with sealant over the sealing tape. Place the bowl, gently rocking it until it fits tightly into place. When you are convinced that the sink is securely fixed, tighten the fastening of the countertop.

Allow the sealant to dry, install the siphon, mixer, and connect to water and sewerage.