Wardrobe around the door - types and selection rules, interior photos

Vadim June 22, 2018

The modern market provides a large selection of various furniture, but it is not always suitable for owners of non-standard and small-sized housing and, in order to save useful space, they have to generate interesting solutions on their own. One of such solutions is the installation of a cabinet around the doors, and we will further try to understand the intricacies of placement and types of such furniture.

The layout of the closet around the door depends on the wishes of the owner and the features of the interior.

Cabinet around the doorway - design features

The peculiarity of the built-in structure is that it flows around the opening, being placed along the entire plane of the wall. Such furniture is suitable for the kitchen, bedroom, living room, hallway, children's room. Depending on the location, options for internal filling and façade design are considered.

This type of cabinet is indispensable in a number of cases:

• lack of space for installing ordinary furniture;
• the desire to leave most of the room free;
• individual features of the room layout.

The product has a number of advantages.

• Large height reaching the ceiling. The top is ideal for storing large items that are not used often.
• Good depth makes the closet spacious.
• The interior space is divided into sections, which makes it easier to find the things you need and creates a rational storage system.
• Placing the cabinet around the door visually increases the remaining space.
• In terms of cost, this option will be cheaper, since some of the elements are walls, floors and ceilings.

But the design is not without weaknesses. Like any built-in furniture, the cabinet cannot be moved to another place. To do this you will have to completely disassemble it.

Preparing the installation site

Before assembling the themed item on site, it must be cleaned. This is especially true for the wall surface, because it will serve as the rear plane of the directly built-in cabinet.

It may be necessary to install utility lines in some places to simplify the operation of the furniture if it has lighting. Instructions describing built-in cabinets rarely emphasize the importance of site preparation.

How does a built-in wardrobe work around a door?

The built-in closet around the door is equipped with mezzanines. Typically, the geometric parameters are 3-5 m in length, reaching the ceiling in height, and the depth should cover the door leaf when open. When designing, you should take into account the shape of the wall, the possibility of opening the doors, and the design of other interior items.

Part of the cabinet structure is replaced by walls, floor and ceiling. Rigidity will be provided by partitions. The doors are mounted on a false frame. It is a frame made of wooden beams or metal profile. After leveling horizontally and vertically, it is securely attached to the walls. It is very important at this stage to compensate for all irregularities, otherwise the normal functioning of the opening system or movement of the valves will be disrupted. The resulting cracks are covered with decorative strips, which are mounted with glue or self-tapping screws.

The cabinet itself consists of side modules, the walls of which act as slopes, and a mezzanine is located above the door along the entire length. The design resembles the letter "P". Depending on the location of the doorway, the cabinet can be made according to the laws of symmetry and have the same dimensions on both sides. If the exit from the room is not located in the middle of the wall, then the product will look asymmetrical.

Types of valves

Niche doors are made from various materials. Thus, the stores offer designs from:

You can choose from glass, metal, plastic or wood

The choice of door depends on the style of the room. Wood always looks good, but is expensive. Instead of solid wood products, you can choose options made from MDF or plastic. These materials also last a long time and have their own advantages.

Glass panels are suitable for a recess, beautifully decorated inside. If an electric meter is installed in it, pipes and wires pass through it, then it is better to make a cabinet with an opaque door.

Wooden

Wood is more suitable for decorating interiors in a house in a classic style, as well as Provence, country, Mediterranean, Scandinavian, and ethnic. You can choose doors of any design: varnished, stained, acrylic painted.

Wooden doors are not suitable for the bathroom. There is high humidity here, which can soon cause the wood to become deformed. In a rustic kitchen, you can make a cabinet in a niche and close it with a wooden door in olive or cream color. Canvases made of thin wooden slats are suitable for the bedroom and hallway - wicker baskets with things can be stored in such a recess.

Metal

Metal products should only be installed in an apartment on walls made of concrete, brick and other durable materials. A plasterboard box may not support the weight of such a structure. Metal swing doors into a niche are not suitable for rooms with high humidity. Their installation is undesirable in a combined bathroom that has a shower or bathtub: water can quickly rust the iron.

Metal doors can be mounted in the recesses of rooms decorated in loft, techno, minimalism, and neoclassical styles. For such premises, you can order doors with a pattern or other original decor.

Plastic

One of the most affordable options. This material does not require special care and is not afraid of changes in temperature and humidity. These doors are ideal for installation in Khrushchev. They can cover a niche or just a mezzanine.

Internal content - features of the organization

The internal content of the built-in wardrobe depends on the room in which it will be installed. The general principle of organizing a storage system involves dividing the useful volume into 3 zones.

• The upper part, made in the form of a mezzanine, is filled with seasonal items and large items that are not often used.
• At the bottom there are special stands for shoes.
• The middle part is reserved for hangers, shelves, drawers, baskets. There is also a trouser holder and a similar smaller device for belts, scarves, and ties.

It is important to rationally use all the interior space of the furniture.

• Hooks for bags will come in handy.
• If the cabinet around the door is installed in the hall, then it is necessary to provide open shelves for beautiful objects, collections, etc.
• The nursery will need a place to store toys, and it should be at an accessible height.
• In the kitchen, a built-in structure is used to place utensils, appliances, supplies and even a refrigerator.
• A home library will fit on the shelves of furniture located in the living room or office.

Fittings set

In appearance, this built-in wardrobe resembles a large box running along the wall. When you need to use this cabinet, it becomes clear that the following parts are present inside it:

• Self-tapping screws and dowels for attaching sheets to each other or to the frame;
• Corners for attaching canvases under shelves;
• Friezes, guides and rollers for door operation (if the doors are hinged, then only hinges are needed);
• Handles, locks, latches for opening and closing and locking door leaves;
• Crossbar, crossbar holders, baskets - for storing outerwear and other things.

If the product includes sliding doors, then a mirror will be needed by default. It will have to be attached to the façade of the canvases using double-sided tape or wood glue.

Facades - design, materials and decor options

Much attention is paid to the design of the facade of such furniture so that it does not look too bulky.

The number of doors is determined by the number of sections.

In the case of a swing system, you should proceed from the recommended dimensions of the canvas, which do not exceed 65 cm. Increasing the permissible value will lead to distortion and breakage of the fittings.

If you decide to choose a sliding option, then the width of the doors can be from 50 to 120 cm, but experts recommend using a narrower range of 60-80 cm. When determining the number of door leaves, you need to clearly understand how you can remove the necessary things, take into account the possibility of pulling out drawers and baskets .

The following materials are used for the manufacture of facades:

• tree;
• chipboard and MDF boards;
• glass;
• mirrors;
• plastic.

By design, the doors can be solid or framed. The latter option gives scope for combining different materials.

Particular attention is paid to the decoration of facades.

• The tree is decorated with carvings. The combination of wood of different shades looks interesting.
• The glass is processed using sandblasting technology, stained glass inserts, fusing, and colored varnish are used.
• Laminate and natural veneer are used for chipboard and MDF.
• The surface of the doors can also be covered with film with photo printing.
• To create an interior in an ethno style, bamboo, rattan, and leather are suitable.

It is important that the appearance of the product pleases the eye, does not look monotonous and boring, and is combined with other furnishings.

Communities › Do It Yourself › Blog › The simplest DIY furniture door.

Hello friends. Many people like to frequently change the interior of their home. I offer you a relatively inexpensive way to change the facade of any furniture. This method of producing doors will also be useful to you in the production of any cabinets, mezzanines, etc. and so on. For example, almost all the furniture in my house is made by hand. The only thing you need to do is take the dimensions and order the material from an organization that produces custom-made furniture. Transportation and assembly, I think, is not the same and difficult task, for which you sometimes have to overpay two or even three times. I hope it will be useful to someone. Moreover, it looks no worse than factory furniture. Colors and sizes, you choose everything YOURSELF. For me this is a very big plus. Enjoy watching.

Recommendations for use and care

The built-in wardrobe around the door will last a long time if you adhere to the general principles of operation. They relate to the correct placement of things and compliance with the permissible load.

So heavy objects are placed in the lower part, closer to the edge of the shelves. You can store light items at the top. The permissible vertical load for shelves made of chipboard and MDF is about 10 kg, glass shelves have an indicator of up to 2 kg. The force applied to drawers should not exceed 5 kg, and to hinged doors - 3 kg.

If it’s about appearance, then you should adhere to the following recommendations.

• Protection from direct sunlight will help avoid discoloration and deformation.
• Temperature conditions in the range from 10 to 25 °C are considered comfortable for furniture.
• A humidity level of no more than 70% is desirable, however, too dry air can lead to cracking of some materials.
• Exposure to aggressive household chemicals is unacceptable.

To care for the surface, special products are used depending on the material of the façade.

In the case of a sliding system, the guides are regularly cleaned of small debris and dust using a vacuum cleaner, and the wheels are wiped. This rule also applies to retractable mechanisms.

From time to time you should inspect the fastening points, tighten them if necessary, lubricate the hinges and hinges.

Tags: DIY furniture door

Comments 27

Well, it’s all crap, guys ((It’s chipboard, finols and fermoldehydes, which are strong poisons. Not to mention that the filler is woodworking waste. Well, furniture panels are already sold, coat them with oil, or paint them in any color with good paint...

My friend, 99% of those sitting here have such furniture. What are you talking about?

What is this argument about 99%? As our teachers said at school - “if everyone is bent off the roof, you too will jump”? I am for changing Soviet thinking and striving for better. And it’s not necessarily more expensive; Ikea also has quite affordable wooden furniture. And you can do it yourself without any problems. I made a cabinet like this from furniture panels, and the paneled doors are for sale... Four years ago it cost me, I think 8 thousand, and this is a normal product, not shitty furniture made from toxic glue and sawdust!

Normal wooden furniture cannot be afforded by the common man. And it’s not so easy to do it yourself for a person who doesn’t care about it. And I didn’t understand at all about Soviet thinking. What, in the Soviet Union they made such furniture as they do now? Look at some grandma’s house, there’s a hundred pounds worth of some kind of heavy-duty wooden chest of drawers. And the varnished walls were already closer to the collapse of the USSR and there was no choice. What does the scoop have to do with it? Should I write something against it? I don't understand.

and at first I thought: you sawed, trimmed and glued yourself...

A good option to update the facade

The door weighed 2 kg, became 3 kg))

There is no way to upload the video, unfortunately, so I apologize if my question was answered there, what did you use to cover the casing?

What do you mean?

Normal topic. I think that regular trim made from sawdust in film can also be used, you just need to cut it carefully. If I can’t think of anything else, I’ll decorate the mezzanine like this.

Well, assembling such a façade at home is also problematic. A frame profile made of MDF is produced by AGT; it can be assembled in two ways or using plastic butterflies, but this requires a special router, and it is not cheap. Or using a pneumatic stapler on pins is also a rather specific thing and not everyone uses it on their farm. I’m telling you as a former furniture maker. So the only option left is to order a ready-made facade. And as far as I know, the cost is also not cheap. Although now most furniture makers work for the sake of work. Almost no gain. I did it a little differently. I bought all the materials myself and went to familiar furniture makers, sawed, cut, assembled myself. In this case, you can save money, but not too much.

I also thought it was a framer) but no) it’s an imitation of a framer, you can clearly see it in the photo. the profile is simply glued to an ordinary chipboard part

Then yes. Cheap and cheerful. At least change the frame every year when you get tired.

Wardrobe around the door - interior photo

>

A closet around the doorway makes it possible to effectively use the space of the room. It will look appropriate in any room. It is important at the planning stage to carefully consider the color and design, options for internal filling, and methods of opening doors. This will allow you to create a unique interior and equip a spacious storage system.

Advantages

Many people have probably thought more than once about how they can functionally use all the walls around the front door. By placing a structure with mezzanines near the doorway, you can not only save space, but also create a convenient area for storing many household items. Installation of such furniture will be an ideal solution for small apartments where you simply need to free up living space.

If the apartment layout has unaesthetic and non-standard protrusions and niches, then by installing a U-shaped cabinet near the entrance or interior door, you will be able to give the room classic and regular shapes.

Of course, you won’t be able to purchase a ready-made wardrobe to suit your layout in a simple furniture store, since the sizes of doorways vary significantly even in standard buildings of a typical design. Therefore, you will have to make such furniture yourself or contact workshops that make custom-made furniture.

But despite all the difficulties, installing a cabinet around the door will provide you with the following benefits:

• You can independently develop the design of the cabinet, determining the number of compartments, shelves, hangers and drawers you need;
• You can choose a design that matches the overall style of the room, choose the color and texture of the doors, thereby most optimally fitting your furniture into the color space of the interior.

Tip 6: Install a console or chest of drawers

These items in the hallway interior are often ignored, believing that they only take up space. If the room is small and there is not enough room to maneuver, then a chest of drawers or a console may really be superfluous. However, in large hallways it is worth setting aside space for them. Elena Erashevich says that the console is very practical and easy to use - you can always put an umbrella, gloves, keys, or handbag on it. A flower arrangement or seasonal bouquet also looks great on the console, adding a touch of freshness and coziness to the interior.

Tatyana Ovdiy and Maria Islamova share the same opinion: “Choose either a console or a chest of drawers and make it to order. In this case, you can provide the required number of drawers and compartments for convenient storage of small items that constantly get lost,” say the designers.

Tip 3: Mirror doors on cabinets

Another tip from professional designers concerns mirrored cabinet fronts. With their help, you can add light to the hallway and visually increase the space of even the tiniest room, which is especially important for corridors. Another obvious plus is the presence of a full-length mirror. This element is very important for the hallway, since before leaving the apartment the owners need to evaluate their appearance.

Zoning principles

To make the room visually proportional, it is “pulled” in the desired direction with the help of furniture. For example, a rectangular shape is always divided only across.

For a narrow, elongated room, a ladder partition is well suited. It does not overload the space and does not interfere with natural light.

If the ceilings are low, tall narrow structures will visually lift them. But designers do not recommend making them continuous to the ceiling.

The room should be divided into zones, but at the same time have a common style and color scheme. It is better not to clutter a small room with furniture. Transformable furniture is perfect for such cases. Designs that combine different zones into one compact structure look original.

In a large studio, the problem of furniture placement is not so acute, so zoning plays a decorative role. Most often, it serves as an interior decoration, simultaneously performing a storage function. Therefore, the main emphasis is on its appearance. Unusual solutions are welcome - combinations of open and closed compartments, asymmetrical shelves, the use of glass and other decorative elements, lighting.

Tip 5: Panel on the front door

The front door is not a separate, unnecessary element. This is an important part of the hallway interior, and therefore your task is to harmoniously fit it into the decor. If you first replaced the door and then renovated it or don't intend to buy a new one in general, just order a trim in the style of all interior doors. There is another option - install a smooth lining in the color of the walls. In this case, you can hide the front door and “dissolve” it in space.

Corridor zoning

Zoning is the most optimal option for corridors in panel houses. Such a small space is quite difficult to divide into zones, but in the end such a solution will visually make it wider and its functionality will increase.

Arched partitions are suitable for small corridors. They will divide the space into 2-3 zones. The first will serve for removing clothes and shoes, the other will serve for storage, the third will become a transition between the kitchen and another living room. Read more about creating stylish arches here: https://homeli.ru/remont-i-otdelka/arki-iz-gipsokartona.

Zones can be distinguished:

1. Furniture. On one side there is a clothes hanger and bedside tables for shoes, on the other side there are built-in wardrobes for various things. The cabinets should be a different color than the hanger.
2. Wall decoration. Different areas are covered with different wallpapers or painted in different colors. They should be in harmony, but not too different. Wood paneling will look great.
3. Various floor coverings, but it is worth choosing wear-resistant materials. The floor can be at different levels.
4. Emphasizing the entrance area and hallway area.

Tip 2: Accent tiles on the floor

If earlier they tried to decorate the hallway in neutral shades and focused exclusively on decorative elements, for example, paintings, now other techniques are being used. Designers unanimously say that one should not be afraid of experiments, giving preference to light and plain finishing materials. It’s better to take a risk and choose bright or graphic tiles to decorate the corridor. This will attract attention and make the floor an accent.

Designer Elena Erashevich believes that the original floor covering in the corridor allows you to create the necessary dynamics. You wouldn’t expect this from boring white or beige tiles, but a bright example with an unusual print will add relevance and character to the interior.

Ready-made models or to order

Buying a partition cabinet is a responsible decision. These are not the cheapest designs, but you will use them for a long time. With our advice you will not go wrong with your choice. First, decide whether to buy in a store or order from craftsmen according to your sketch. Large furniture hypermarkets offer a decent catalog of ready-made models.

As a rule, these are large racks that will become an alternative to the wall in the living room. The advantages are a relatively low price, and you don’t have to wait long for the craftsmen to make and install them.

Some companies produce collapsible types. You receive a set of components and fasteners, and assemble a homemade rack at home. This is how the popular furniture chain Ikea works.

Usually, hypermarkets have several shelves in their assortment that will match the design of your room and, for little money, will do a great job of zoning.

We suggest considering the Ivar and Kallax models. Their low price and sleek design make them a universal choice for modern apartments.

“Ivar” is taller - 226 cm, material - unpainted pine. Nothing superfluous - simple forms with spacious shelves through which light freely penetrates into the separated part of the room. It will fit into both a classic interior and a fashionable loft.

"Kallax" is a white shelving unit with square sections. You can choose storage boxes of the right size for it in the store. You can put books and decor on open shelves, and in closed compartments you can hide everything that should not be displayed.

If you want to purchase a practical model with minimal investment, take one of these. If you need a built-in multifunctional cabinet, only professionals can make it. It is also better to make a compartment to order, since it is quite difficult to find a ready-made partition that will fit into the overall style of the room and have all the necessary characteristics.

Partition in a public corridor: advice and the issue of legality of construction

Very often the common corridor is large and the apartment has a recess that ends with the front door. Many people fence off this part with various (usually metal) partitions. But is it legal? The corridor is part of the property of all owners of apartments in a given building. Such an inter-apartment staircase is not the property of the residents of one apartment. Permission to erect a partition can only be obtained during a general meeting of residents.

Additional things you need to know:

1. It is strictly forbidden to block the corridor without permission. But if there is no lock on the door, such a partition is quite legal, since any resident of the house can gain access inside.
2. It is necessary to notify regulatory authorities (for example, housing inspection authorities). One meeting and consent of residents will not be enough.
3. You can install a partition only if you own the apartment itself. The inspection may require the presentation of documents. In rented living space, such actions are illegal.

Fire safety standards may be violated when constructing such a structure, especially if the door built into the wall has a lock. In such a case, the case may go to court.

Tip 4: Bright walls

Most people are afraid of bright colors because they think that they are difficult to combine, they can quickly get boring or will be overwhelming. Yes, there are certain risks, but it is worth considering the fact that the hallway is a passage room. The owners and guests of the apartment spend a minimum of time here, and therefore you need to boldly use accents. Any rich color will work to your advantage, as it will create the right atmosphere, add volume and help transform the existing space. If the hallway is small, use the one-color technique: let the walls, ceiling, floor, and closet be the same shade. This will visually blur the boundaries of the room and make it larger.

How to separate a corridor and rooms with a partition

The zoning of an apartment contains a very important meaning of human existence. Everyone wants to enjoy peace and quiet in the bedroom, be focused in the office, and relax in their favorite corner. But it is not always possible to redesign an apartment on a large scale and divide it into the necessary rooms according to your wishes.

The exit is in the interior partitions, which are an excellent alternative to a complete renovation of the home. Read more about the types of partitions and their design: https://homeli.ru/remont-i-otdelka/peregorodka-dlya-zonirovaniya-komnaty-iz-gipsokartona.

After demolishing the main wall between the corridor and the room and installing a movable partition, it becomes possible to increase and decrease the space. Narrow passages and unnecessary doors disappear, and when the partition doors move, the boundaries are restored.

The material of the partition can be different:

1. Wooden;
2. Glass;
3. Made from acrylic raw materials;
4. From plasterboard;
5. Made from polycarbonate;
6. Brick;
7. Made from foam concrete blocks;
8. Combined - a frame made of metal and metal-plastic with glass, bamboo, textile and other inserts.

Plasterboard partitions completely imitate a wall. They will help create a perfectly flat and smooth surface of the partition, and are also easy to install. They can be curved if such a gypsum plasterboard structure fits into the design of the room. If you don’t want to act radically, you can visually separate the corridor from the room: with a shelving unit, flower pots, a closet, an aquarium on a cabinet, etc. Such zoning visually separates the residential area from the entrance area.