Rating of the best freestanding dishwashers

A freestanding dishwasher is optimal for installation in kitchens with a standard layout. The equipment can be placed anywhere in the room or placed in the corridor, utility room, or bathroom. When selecting a model, dimensions, functionality, additional options, energy consumption and water consumption are taken into account. The list of popular devices includes Flavia FS 60 Enza, Bosch SPS 40E42, Gorenje GS52010S.

Peculiarities

Free-standing dishwashers, unlike built-in appliances, can be moved; during installation, there is no need to change the layout or make adjustments to the interior. If necessary, equipment can be hidden under a table, cabinets, between kitchen furniture or in a utility room or utility room. The external panel allows you to adjust the time and operating modes of the device. The units are available in different colors (white, gray, black).

The dimensions of a full-size machine that is not built into furniture are 60x68x89 cm. Floor-standing equipment can process up to 16-17 sets of plates and cups. The dimensions of compact desktop models (width up to 45 cm) allow you to install equipment on a table, cabinet, or in a built-in closet. Small models do not have a drainage system; cleaning is performed using filters that use liquid for further operation.

Portable equipment can be transported to a country house or a recreation center. Machines with a narrow configuration are produced with dimensions of 45x60x80 cm. The equipment is optimal for atypical kitchens, studio apartments with a combined living room, because Can be placed between pieces of furniture and saves space.

Advantages and disadvantages

The list of advantages of household devices:

• The equipment, installed separately from the headset, has a complete, stylish design.
• There is no need to build in a dishwasher, change the layout of the kitchen, or spend money on materials and finishing work.
• Based on consumer reviews, manufacturers produce a wide range of designs with different colors, textures, and designs in different stylistic directions.
• If a non-built-in appliance breaks down, you can quickly carry out repair work. No dismantling work is required to inspect and replace elements.
• Stationary devices cost less than built-in equipment; no costs are required for electrical networks, water supply, or complex technical work.
• For a kitchen with a completed renovation and equipped with household appliances, a stationary dishwasher is a practical solution.

The list of disadvantages of the type of equipment:

• models installed separately from the headset are noisier.
• Regular filter replacement is required;
• the power of structures is less than built-in types.

Options for installing a dishwasher in a cabinet

The smaller the kitchen, the more careful its planning. You have to fit so many necessary things into a few square meters that you have to save every centimeter. One solution is to place household appliances in a sectional cabinet.

A pencil case is a cabinet that is used in limited space. It has many shelves on which you can place anything you want. As it turned out, and built-in technology.

There are two embedding options:

• Horizontal. With this solution, a cabinet of 3-4 sections is placed against the wall. Each section contains household appliances - a dishwasher (DMM), an oven, a washing machine, etc.

• Vertical. A classic pencil case allows you to save 50–100 cm of free space. Savings are achieved due to the fact that the equipment is not installed on the floor in a row, but is placed one above the other. The dishwasher is placed in the lower section of the pencil case.

Criterias of choice

When choosing a free-standing dishwasher, it is recommended to consider the following parameters:

• dimensions;
• basic functions;
• configuration;
• methods of connecting to electrical networks;
• convenience of the filter system;
• way of placing the kitchen, living room in the space;
• additional options, temperature conditions.

It is necessary to determine the style, texture, and color scheme of the model to match the kitchen interior. Classic gray, white, milky and gray shades of cars are optimal.

Installing a dishwasher in the kitchen section

Before installing the dishwasher, you need to measure the opening again. Make sure that the machine body fits freely into the section you prepared.

All built-in dishwashers - 45 cm and 60 cm - must have a small gap between the walls. It is also needed for normal air ventilation after the machine is running.

Remove the back wall in the niche. There should be free space to accommodate hoses and wires. Check that there is a protective plate under the tabletop. If it is not there, then install it.

After this, insert the machine body into the niche and adjust the extendable legs so that the dishwasher box is horizontal to the ground.

To do this, use a building level. This is necessary so that the dishwasher (60) does not break down prematurely. The built-in equipment will then easily fall into place.

Determine in advance where to attach the screws to secure the machine body. If necessary, drill small holes. They are useful for ease of entry of the self-tapping screw into the furniture body. Or use a screwdriver.

Full size models

Full-size equipment is available in a width of 60 cm and processes up to 12 sets of dishes. Devices with a width of 45 cm are capable of processing 8-10 sets. When purchasing products, it is important to calculate the available kitchen space and determine the space for large appliances.

The ranking of the best PMMs includes the following household devices:

• Asko D 5436 W;
• Bosch Serie 4 SMS 44GW00 R;
• Flavia FS 60 Enza.

Asko D5436 W

Dishwashing equipment Asko D 5436 W is of high quality, durable, comfortable to use, and can be installed indoors separately or built into a set at the design and installation stage. You can place the equipment under the kitchen table or work surface. The model has an ergonomic configuration and universal shades (light gray, white, silver). The device is spacious and designed to clean 13 sets of plates and mugs.

The equipment uses water economically; up to 10 liters are consumed per cycle. The list of additional options for the device includes a quick drying method. The trays are constructed of stainless steel and padded with a nylon layer. Sections for spoons and knives were designed. There is a built-in zone for high-quality processing of dishes and an indicator for determining the transparency of the incoming water. The equipment is low noise (46 dB), economical in energy consumption (class A+++), and equipped with child protection. The advantage of the device is its connection to cold water supply.

Bosch Serie 4 SMS44GW00R

The Bosch Serie 4 SMS 44GW00 R device is efficient in operation, universal in style, and can be placed in kitchens with different designs. The machine is ergonomic, compact, with an easy-to-use internal structure, economical consumption of electricity and water. The equipment has 2 built-in baskets, the location of the upper compartment is adjustable, and folding elements are designed in the lower block. During 1 working cycle, about 11-12 liters of water are consumed, the required amount of electricity is 1.05 kW/h. The device is low noise (48 dB).

The unit is equipped with 4 dish cleaning programs and additional options are provided. When the tank is half full, energy consumption and the volume of water used are reduced. The equipment is equipped with the DosageAssist system, which ensures rapid dissolution of solid cleaning compounds. There is a built-in delay start program for up to 24 hours, high-quality cleaning modes with disinfection of dishes (VarioSpeed), door locks, and self-cleaning functions.

Flavia FS 60 Enza

The Flavia FS 60 Enza model belongs to the middle price category. The device is high-quality, durable, ergonomic, and has a laconic design. The equipment is equipped with 8 operating modes and is equipped with a sensor on the external panel that determines the degree of purity and transparency of the water. The device automatically calculates the number of rinses for dishes. The unit is economical in energy consumption and has modes for processing delicate glassware and crystal.

The internal design of the equipment is spacious and allows you to process 14 sets of dishes. Built-in holders for glass glasses, vases, glasses, spoons. The partial tank loading function allows you to save water and electricity consumption. Express Wash option helps reduce resource consumption. The energy consumption of the model is class A++.

Hotpoint-Ariston HFO 3c23 WF

The Hotpoint-Ariston HFO 3C23 WF model is spacious and equipped with 9 operating modes. There is a built-in delicate cleaning option for dishes made of crystal, glass, and plastic. You can adjust the baskets in height and place dishes of atypical dimensions in the device. The advantage of the unit is its low noise operation (43 dB), stylish design solution, and the presence of 9 cleaning operating modes. It is possible to load up to 14 sets. The device is inexpensive and easy to repair.

How to install a 60 cm dishwasher with your own hands

You can install the dishwasher yourself. There's nothing complicated about it. But if this is your first time encountering this, then you better be well prepared before the box with the unit is brought home to you.

You must understand where and how you will do the installation. What knowledge and skills will you need for this? What tools will you need?

What problems might you encounter? What you need to do to ensure that the dishwasher you bought and installed yourself worked for a long time and reliably.

Preparing the kitchen for a dishwasher

Start preparing by choosing a place in the kitchen. The size of the section opening must correspond to the width of the machine box.

For example, a built-in dishwasher 45 centimeters wide should fit freely into the opening you choose and not leave very large gaps. Here you may be faced with two options:

1. Installation in a new kitchen.
2. Installation in an old kitchen.

If the furniture in your kitchen is new and modern, then you should not have problems with installation. All modern kitchen cabinets and cavities are standardized and require built-in kitchen appliances. To integrate a dishwasher, you don't have to modify anything.

And if you bought furniture for the kitchen a long time ago, then you may not have suitable ready-made options for installation. So get ready to do a little work with a tape measure, hammer, hacksaw and other tools.

Keep in mind that the most common built-in dishwashers on sale are 45 cm and 60 cm wide. Their height may be different. But all of them are equipped with sliding legs.

Models 45 cm wide

Freestanding models with a width of 45 cm are designed for kitchens of small-sized and non-standard configurations.

In the ranking of popular models:

• Miele G 4620 SC Active;
• Candy CDP 4609;
• Bosch SPS 40E42;
• Gorenje GS53314W.

Bosch SPS25FW12R

The dishwasher model from Bosch SPS25FW12R is ergonomic, with an elongated configuration for placement in compact kitchens. Cleaning of 10 dish sets is provided; the baskets can be adjusted in height to accommodate non-standard plates and glasses.

The equipment operates in gentle cleaning or intensive processing modes. The device is supplemented with blockers, comprehensive protection against water leaks, and sensors. You can delay the start time of cleaning up to 9 hours, automatically clean the filter. The equipment is budget-friendly, easy to repair, warranty period is 12 months.

Bosch SPS40E42

Bosch SPS 40E42 dishwashing equipment is high quality, ergonomic, and multifunctional. The unit is equipped with a water heater that reduces energy consumption. The appliances can be installed under the worktop or between the modules of the kitchen unit.

The device is spacious, includes 2 trays, and is equipped with 4 operating modes. Condensation drying is provided. Water consumption for 1 cycle is no more than 9 liters. The equipment is low noise (48 dB), equipped with protection against water leaks. It is possible to delay the start time by 3-9 hours.

Miele G4620 SC Active

The narrow model Miele G 4620 SC Active is affordable and universal in design. An external display and convenient control technology are provided. The device can be installed without additional finishing between furniture modules. Processing of 9 sets is provided. The upper trays are designed for coffee and tea sets. The door is equipped with a closer and a lock. The unit is equipped with 6 operating modes.

Economical water consumption, external and internal protection against liquid leakage, and the option of working with a lightly loaded tank are provided. The device can be connected to hot water pipelines to reduce energy costs. Modes for gentle cleaning and disinfection of dishes are provided. The device is low noise (46 dB).

Gorenje GS52010S

The Gorenje GS52010S equipment is low noise, equipped with delicate cleaning modes, 5 working programs, spacious, and affordable. The device is ergonomic and reduces energy costs, because belongs to class A++. The device is equipped with a control panel and display. There are gentle, standard, intensive dishwashing, easy cleaning and half-load modes.

Candy CDP 2L952W

The Candy CDP 2L952W model is affordable, durable, and has a high-quality build. The device is equipped with 5 operating modes. During a cycle, the equipment consumes 0.69 kW/h and about 9 liters of water. There are blockers for safe operation, delayed start for 3-9 hours. The disadvantage of the unit is its noisy operation (52 dB).

Why remove the machine?

Indeed, why take the machine out of the built-in kitchen, for what purpose? It stood there for many years and may it continue to stand.

1. The first and most obvious goal is to repair the machine. Many breakdowns can be eliminated by gaining access to the parts of the machine tray, and such access can only be obtained by dismantling the built-in dishwasher. There are no other options.
2. The second goal is related to replacing the dishwasher unit. You can sell your old equipment to someone else, and use the proceeds to buy a new “home assistant.” But in order to sell an old machine, it must be removed correctly so as not to damage anything or completely ruin the presentation of the equipment.

Improper removal of the dishwasher may result in it being unable to be reinstalled.

1. The third goal is more global - renovation of the entire kitchen with replacement of furniture. When disassembling a kitchen set, it is impossible to leave the machine in it. She needs to be pulled out, and this needs to be done carefully, since further use of the “home assistant” is planned in the future.

As you can see, there are more than enough reasons. If one of them affected you, read our post to the end and understand how to properly remove your dishwasher.

Why not invite a master?

The reasons are purely economic. If you have money and don’t mind sponsoring the master a little, then you don’t need to read this article to the end. Call a specialist, he will quickly arrive and do everything. If you don’t want to pay extra money, take note of our arguments.

Firstly, the technician almost always charges a separate fee for dismantling Bosch and other brands of dishwashers. The cost of the service can reach up to $40. And if diagnostics and repairs are required in the future, you will pay separate money for this. Secondly, by calling a specialist, you will waste time, because due to busy schedules, specialists rarely arrive very quickly. Thirdly, men and even some women want to show independence, if not in all, then in many matters. Everyone wants to feel like a jack of all trades. It’s not always right to stroke your pride this way, but in our case it’s acceptable.

The process of removing the machine

Well, you’ve decided to pull out the machine yourself from under the tabletop or from the cabinet, let’s get to work, but first, let’s prepare the tools. Inspect the machine mounts and select suitable screwdrivers and wrenches. For the most part, you can get by with a screwdriver and a set of bits. We take it and go to the typewriter.

1. First, unplug the power cord from the socket and also shut off the flow of water into the machine.
2. Next, unscrew the strip of the narrow front panel, which is located under the machine door. Not all dishwasher models have such a bar. Take, for example, the Electrolux line of dishwashers. If you have such a machine, skip this step.
3. Unscrew the inlet hose and place a bucket so that the remaining water drains into it.
4. We find the place where the drain hose connects to the siphon fitting and unhook the hose.

Most likely, the hose will be pulled to the fitting by a clamp, so be prepared to loosen it or cut it off if the clamp is plastic.

1. Open the door of the washing chamber, find the fasteners coming out and unscrew them. These screws secure the appliance to the countertop.
2. We unscrew the fixing screw and lower the legs of the machine to the limit.
3. We grab the body of the machine and push it towards us with rocking movements. You need to act carefully so as not to drop the machine on your feet.

Compact models

In small spaces, dishwashers that can process 4-8 sets are optimal. The equipment is located under the worktop, on the cabinet, between furniture blocks. The list of quality devices includes the following:

• Bosch Serie 4 SKS62E22;
• Candy CDCP 6/ES.

Candy CDCP 6/ES

Small and budget dishwasher Candy CDCP 6/ES is designed to process 5-6 sets. The low weight allows the device to be installed on tables, in a hanging cabinet, or on floor stands. The chamber has 2 baskets and compact trays. The equipment is equipped with 5 operating modes and condenser drying. The device is economical in energy consumption. Water consumption is economical, 8 liters are consumed per cycle. The disadvantage is the insufficient sound insulation of the device (51 dB).

Bosch Serie 4 SKS62E22

The compact Bosch Serie 4 SKS62E22 appliances are optimal for small spaces. It is allowed to transport the device, move it around the kitchen unit onto cabinets and shelves. The equipment is designed for 6 sets and operates in 6 modes. There is a reduction in water consumption, a delayed start, and a calculation of the number of necessary rinses. The device is low noise (48 dB).

How to make a cabinet for a dishwasher

This can be done in the following way:

1. Select material. This can be 16 mm thick chipboard. You need to choose a waterproof option.
2. Draw up a design diagram taking into account all dimensions. You need to measure the car and add 10 mm to these parameters. From each side.
3. The parts are being cut. To prevent damage to the floor, you can place it between it and the parts that need to be cut.
4. The frame is connected, the back wall and table top are mounted using screws.
5. Holes are drilled in the walls for air circulation.
6. The door is installed. It can open in different directions. In this case, you need to use special fittings.

A homemade cabinet would be ideal for use as a “shell” for a dishwasher. At the same time, you can choose the material to match the design of the kitchen.

Tips for use

When connecting the machine, it is important to follow the manufacturer’s instructions and take into account safe operating techniques. The units are connected only to sockets with grounding. Fuses are installed next to the devices. It is important to connect a shut-off hose to the water supply to shut off the device in the event of a breakdown. It is recommended to install a filter in the device for cleaning. The height of the water drainage hose should not exceed 40 cm from the floor surface. After completing the installation work, it is necessary to test the device.

Installation under electric or induction hob

For this purpose, a fully built-in model is more suitable than others. Such PMMs are more compact; their package includes everything needed for installation, as well as thermal insulation material. The best option is induction cookers; they hardly heat up and the dishwasher is not in danger of heating up. When installing devices, keep these tips in mind:

• There should be at least 2.5–3 cm between the surfaces of the devices.
• Place a sheet of foil on the inside of the tile - this will act as a moisture barrier.
• The recommended height of the PMM is up to 82 cm. The height of countertops is usually 89–90 cm. Consider your height and the height of the pots you want to look into.
• Leave free space near the back surface of the device - hoses and other communications will be connected there.
• Adjust the PMM legs - there should be air circulation under the bottom. The gap from the floor to the bottom is 1 cm. This space will prevent the device from overheating.
• Do not rush to install the device, first make a drawing, calculations and measurements.

Why is it better to get a built-in dishwasher yourself?

Many users of Bosch, Siemens, Electrolux and other brands of dishwashers are thinking about how to remove the machine from the built-in kitchen. If everything is done correctly, the work will not take more than 10 minutes.

Why is it better to do the work yourself rather than contact a service center? You can save on the work of a master, who will definitely count the dismantling of the PMM as a separate service.

For example, equipment needs diagnostics to find out the cause of the breakdown. What you pay for:

• for a specialist visiting your home (depending on the company);
• for diagnostic services;
• It will be on the spot: in order to carry out the inspection, you need to remove the PMM from the furniture - you will also pay for this.

Whether to contact the service center or not is up to you. After reading our article, you will learn how easy it is to do the work yourself.

After purchasing a dishwasher, many turn to furniture makers who install and connect the appliances. There are cases when self-tapping screws are used to drill through furniture panels or the body for better fastening.

As a result, the plastic water tank located at the side wall of the PMM is damaged. There may not be any immediate leakage because the self-tapping screw is inserted tightly. But when you decide to pull the car out, the tank will no longer be restored.

How to install and connect a dishwasher, read the previous article.

First dishwashing

Once the dishwasher has cooled and dried, you can begin loading the dishes. But before you load the machine for the first time, you should familiarize yourself with a number of rules:

• all dishes must be cleaned of large food residues;
• frying pans and other large items should be placed in the lower basket;
• The plates cannot be placed close to each other, because this way they will not be washed.

Different machines, for example Siemens or Samsung, have different washing modes, so you need to study the instructions for your specific model. Most often, “Quick wash”, “Intensive” or “Delicate” is selected, it all depends on the degree of contamination and whether there are greasy pans in the chamber.

After the detergent has been added and the desired mode has been selected, all that remains is to press start and wait for the process to complete. When the machine does its job, it will let you know with a characteristic sound.